JBL Professional VTX V25-II

Større billeder

Full Size 3-vejs høj-direktivitet line array med fastvinkelmontering ASM-suspension

VTX V25-II er et full size 3-vejs høj-direktivitet line array-element, der inkluderer en ny 4. generations bølgeleder, som forbedrer long throw-ydeevne, bølgefrontskontrol og er en forbedret effektmatch for Crown IT4x3500HD. Transducersammensætningen for VTX V25-II omfatter to 2000W 15" Differential Drive® basdriver monteret i støbte aluminiumskabinetter, fire 8" Differential Drive midranefrekvensomformer, der afleder gennem en patenteret (RBI Radiation Boundary Integrator®), og tre revolutionære D2 Dual-Diaphragm Dual-Voice-Coil kompressionsdriver monteret på den nydesignede bølgeleder. Patenteret rigging, Crown I-Tech HD-forstærkning med BSS ® OmniDriveHD V5 Processing og JBL HiQnet Performance Manager™ konfiguration og kontrolsoftware fuldender systempakken.

Funktioner

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Patented JBL S.A.F.E.™ Suspension System
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

Flere detaljer

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

VTX S.A.F.E™ Suspension & Laser setup

Next Generation Line Array System Solutions.

JBL’s patented S.A.F.E suspension system is streamlined for speed and efficiency with improved hardware for faster setup with fewer pinning operations and greater security.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

Downloads

Specifications

	Størrelse	Uploadet
VTX V25-II Spec Sheet opdateret: jun 2023	1,26 MB	jun 2023

Brochures

	Størrelse	Uploadet
VTX V25 System Brochure opdateret: dec 2020	6,48 MB	dec 2020

CAD Drawings

	Størrelse	Uploadet
V25-II 2D Drawings PDF opdateret: jul 2019	125 kB	jul 2019
V25 3D Drawings DXF opdateret: jul 2019	208 kB	jul 2019

Compliances

	Størrelse	Uploadet
VTX V-Series Declaration of Conformity opdateret: dec 2020	158 kB	dec 2020

Software

	Størrelse	Uploadet
Venue Synthesis udgivet: jan 2025		jan 2025
Performance Manager 3 udgivet: jul 2024		jul 2024

Ease Data

	Version	Størrelse	Uploadet
VTX V25-II/S28 EASE GLL version 1.2, opdateret: dec 2020	1.2	29,8 MB	dec 2020

Preset Libraries

	Version	Størrelse	Uploadet
V25-II Preset Library version 2.1, opdateret: dec 2020	2.1	595 kB	dec 2020

Service Notes

	Version	Sprog	Størrelse	Uploadet
VTX V25-II Spare Parts version A, opdateret: apr 2026	A		72 kB	apr 2026

Hvis nogle af linksene ovenfor resulterer i mærkelige tegn i din browser, skal du højreklikke på filen for at gemme den på din computer.

Reservedele og service

Specifikationer

System Type	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Nominal Impedance	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Dimensions (H x W x D)	414 mm x 1223 mm x 614 mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

Tilbehør

VTX V25 AF | Array Frame

Større billeder

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:

Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
9 pick points available for single point suspension
Optional Extension Bar available
Flexible front-to-back or side-by-side pick point options
Supports up to 24 cabinets (array geometry dependent)
Can be used for ground stack applications
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF
4 x height-adjustable leveling feet for ground stack applications
4 x Quick Release Pins (QRP) for securing top enclosure to the frame

Dokumentation

VTX V25 AF EB | Array Frame

Større billeder

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

Features:

Compatible with VTX-V25-AF
2 x pick points available for single point suspension
1 x pick point available for VTX-V25-LH level hoist attachment
Supports up to 24 cabinets (array geometry dependent)
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF-EB extension bar
1 x height-adjustable leveling foot for ground stack applications
2 x Quick Release Pins (QRP) for securing the extension bar to the array frame

Dokumentation

VTX V25 PB | Pull Back Accessory

Større billeder

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

Dokumentation

VTX V25 PB Specsheet [539 kB]

VTX V20 DF | NEDFILLINGS ADAPTER

Større billeder

VTX V20-DF er designet til at facilitere hurtig montering og præcis justering af VTX V20 og V25-II / V25-II-CS systemer og udgør en letvægtsløsning til at give bredere dækning i bunden af VTX V25-II / V25-II-CS arrays. Letvægtsdesign med flere muligheder for vinkler mellem V25-II / V25-II-CS og V20 (3,5°, 7,5°, 11°). Kan bruges som downfill-adapter-ramme til V25-II arrays eller som downfill-adapter-ramme + tilbagetræk-ramme til komprimering af VTX V25-II-CS arrays med V20 downfill. Understøtter op til 6x VTX V20 kabinetter suspenderet under VTX V25-II / V25-II-CS.

Funktioner:

Vinkelindstillinger: 3,5°, 7,5°, 11°
Letvægtsdesign
Præcis HF-exit-justering mellem V25-II og V20
Understøttelse af op til 6x VTX V20 kabinetter

Dokumentation

VTX V20 DF Spec Sheet [568 kB]
VTX V20 DF Suspension Manual (rev2) [852 kB]
VTX V20 DF Customer Drawings [1,42 MB]

VTX V25 ACC | Accessory Cover and Casterboard

Større billeder

VTX Series V25 Accessory Kit for transportation and protection of one VTX V25 or VTX V25-II enclosure. Includes: padded, reinforced protective cover with handle cutouts and rear panel access flap; dolly caster-board with rugged tour grade casters and rotating cam mechanisms for secure attachment to the V25 enclosure. Beveled recesses auto-locate with V25 caster board mount tabs. The rotating cam mechanism can be released while V25 or V25-II cabinets are face down during the suspension process (no need to manually remove caster board).

Features:

Compatible with VTX V25 and VTX V25-II
Includes padded protective cover and caster-board
Handle cutouts and rear panel access flap
Speaker cabinets can be tested without fully removing the cover
Tour grade casters
Stackable for convenient storage
Rotating release/lock cam mechanisms for secure attachment to loudspeaker enclosure

Included:

1 x VTX V25 caster-board
1 x padded protective cover

Dokumentation

VTX V25 ACC Specsheet [789 kB]

VTX V25 CS K | COMPRESSION SUSPENSION KIT

Større billeder

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes:

2x Suspension frame labels
2x Slot hinge bars
2x ASM bars
2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

Dokumentation

VTX V25 CS K Specsheet [526 kB]
VTX V25 CS K Components [891 kB]

VTX V25 CS K LJ | LABEL KIT

Større billeder

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes:

2 spare labels
Label jig installation fixture
Detailed instructions (see documentation download)
NOTE: At least one label jig installation fixture should be ordered
per VTX-V25-CS-K order

Dokumentation

VTX V25 CS K LJ Shetsheet [401 kB]
VTX V25 CS K LJ Installation Guide [8,73 MB]

HARMAN Pro Insights

Backstage Pass to 8 Pro Audio & Lighting Shows Rocking Live Entertainment

After a challenging couple of years, live music is back in full force. Tours, residencies and festivals are returning and filling venues to capacity. Iconic HARMAN Professional brands like JBL, Martin, Crown, AKG, BSS and Soundcraft are providing touring artists and suppliers as well as live venues

CONTINUE READING