JBL Professional VTX V25-II

Imagens Grandes

Full Size 3-Way High-Directivity Line Array With Fixed Angle ASM Suspension

The VTX V25-II is a full size 3-way high-directivity line array element that includes a new 4th generation waveguide which improves long throw performance, wavefront control, and is an improved power match for the Crown IT4x3500HD. The transducer compliment for VTX V25-II is two 2000W 15" Differential Drive® woofers mounted in die cast aluminum baffles, four 8" Differential Drive midrange transducers firing through a patented (RBI Radiation Boundary Integrator®), and three revolutionary D2 Dual-Diaphragm Dual-Voice-Coil Compression Drivers loaded onto the newly designed waveguide. Patented rigging, Crown I-Tech HD amplification with BSS ® OmniDriveHD V5 Processing, and JBL HiQnet Performance Manager™ configuration and control software complete the system package.

Recursos

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Patented JBL S.A.F.E.™ Suspension System
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

Mais detalhes

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

VTX S.A.F.E™ Suspension & Laser setup

Next Generation Line Array System Solutions.

JBL’s patented S.A.F.E suspension system is streamlined for speed and efficiency with improved hardware for faster setup with fewer pinning operations and greater security.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

Downloads

Specifications

	Tamanho	Enviado
VTX V25-II Spec Sheet atualizado: jun 2023	1,26 MB	jun 2023

Brochures

	Tamanho	Enviado
VTX V25 System Brochure atualizado: dez 2020	6,48 MB	dez 2020

CAD Drawings

	Tamanho	Enviado
V25-II 2D Drawings PDF atualizado: jul 2019	125 KB	jul 2019
V25 3D Drawings DXF atualizado: jul 2019	208 KB	jul 2019

Compliances

	Tamanho	Enviado
VTX V-Series Declaration of Conformity atualizado: dez 2020	158 KB	dez 2020

Software

	Tamanho	Enviado
Venue Synthesis lançado: jan 2025		jan 2025
Performance Manager 3 lançado: jul 2024		jul 2024

Ease Data

	Versão	Tamanho	Enviado
VTX V25-II/S28 EASE GLL versão 1.2, atualizado: dez 2020	1.2	29,8 MB	dez 2020

Preset Libraries

	Versão	Tamanho	Enviado
V25-II Preset Library versão 2.1, atualizado: dez 2020	2.1	595 KB	dez 2020

Service Notes

	Versão	Idioma	Tamanho	Enviado
VTX V25-II Spare Parts versão A, atualizado: abr 2026	A		72 KB	abr 2026

Se algum dos links acima resultar em caracteres estranhos em seu navegador, clique com o botão direito no arquivo para salvá-lo em seu computador.

Peças e Serviços

Especificações

TIPO DE SISTEMA	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Impedância nominal	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
DIMENSÕES (AxLxP)	414 mm x 1223 mm x 614 mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

Acessórios

VTX V25 AF | Array Frame

Imagens Grandes

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:

Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
9 pick points available for single point suspension
Optional Extension Bar available
Flexible front-to-back or side-by-side pick point options
Supports up to 24 cabinets (array geometry dependent)
Can be used for ground stack applications
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF
4 x height-adjustable leveling feet for ground stack applications
4 x Quick Release Pins (QRP) for securing top enclosure to the frame

Documentação

VTX V25 AF EB | Moldura de Matriz

Imagens Grandes

Acessório de barra de extensão utilizado em conjunto com a moldura de matriz VTX-V25-AF para implementar sistemas da série VTX V25 em modo de compressão ou tensão. Cinco opções de fixação de barra de extensão proporcionam separação de pontos de suspensão variável (suspensão de 2 pontos) e flexibilidade adicional para suspensão de ponto único. A barra de extensão pode ser montada na frente ou atrás para aumentar a inclinação ascendente ou descendente da matriz, respetivamente. Quando montada atrás, fornece um ponto de fixação para suspensão de compressão. Uma única barra de extensão pode ser instalada no tubo central da moldura de matriz, ou em alternativa, um par de barras de extensão pode ser montado na frente ou atrás nos tubos de moldura de matriz esquerdo/direito. Uma ou duas barras de extensão podem também ser montadas na frente ou atrás em aplicações de pilha de solo para maior estabilidade e uma gama mais ampla de opções de ângulo de inclinação da matriz. Duas barras de extensão podem também ser montadas na frente e atrás para suspensão de compressão quando é necessária maior inclinação ascendente da matriz.

Características:

Compatível com VTX-V25-AF
2 x pontos de suspensão disponíveis para suspensão de ponto único
1 x ponto de suspensão disponível para fixação de elevador de nível VTX-V25-LH
Suporta até 24 armários (dependente da geometria da matriz)
Tamanho da manilha do ponto de suspensão: 5/8" ou 3/4"

Incluído:

1 x barra de extensão VTX-V25-AF-EB
1 x pé de nivelamento ajustável em altura para aplicações de pilha de solo
2 x Pernos de Libertação Rápida (QRP) para fixar a barra de extensão à moldura de matriz

Documentação

VTX V25 PB | Pull Back Accessory

Imagens Grandes

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

Documentação

VTX V25 PB Specsheet [539 KB]

VTX V20 DF | DOWN FILL ADAPTER

Imagens Grandes

Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays. Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20 (3.5deg, 7.5deg, 11deg). Able to be used as a down-fill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill. Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS.

Features:

Angle options: 3.5deg, 7.5deg, 11deg
Lightweight design
Precise HF exit alignment between V25-II and V20
Support for up to 6x VTX V20 cabinets

Documentação

VTX V20 DF Spec Sheet [568 KB]
VTX V20 DF Suspension Manual (rev2) [852 KB]
VTX V20 DF Customer Drawings [1,42 MB]

VTX V25 ACC | Accessory Cover and Casterboard

Imagens Grandes

VTX Series V25 Accessory Kit for transportation and protection of one VTX V25 or VTX V25-II enclosure. Includes: padded, reinforced protective cover with handle cutouts and rear panel access flap; dolly caster-board with rugged tour grade casters and rotating cam mechanisms for secure attachment to the V25 enclosure. Beveled recesses auto-locate with V25 caster board mount tabs. The rotating cam mechanism can be released while V25 or V25-II cabinets are face down during the suspension process (no need to manually remove caster board).

Features:

Compatible with VTX V25 and VTX V25-II
Includes padded protective cover and caster-board
Handle cutouts and rear panel access flap
Speaker cabinets can be tested without fully removing the cover
Tour grade casters
Stackable for convenient storage
Rotating release/lock cam mechanisms for secure attachment to loudspeaker enclosure

Included:

1 x VTX V25 caster-board
1 x padded protective cover

Documentação

VTX V25 ACC Specsheet [789 KB]

VTX V25 CS K | COMPRESSION SUSPENSION KIT

Imagens Grandes

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes:

2x Suspension frame labels
2x Slot hinge bars
2x ASM bars
2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

Documentação

VTX V25 CS K Specsheet [526 KB]
VTX V25 CS K Components [891 KB]

VTX V25 CS K LJ | LABEL KIT

Imagens Grandes

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes:

2 spare labels
Label jig installation fixture
Detailed instructions (see documentation download)
NOTE: At least one label jig installation fixture should be ordered
per VTX-V25-CS-K order

Documentação

VTX V25 CS K LJ Shetsheet [401 KB]
VTX V25 CS K LJ Installation Guide [8,73 MB]

HARMAN Pro Insights

Backstage Pass to 8 Pro Audio & Lighting Shows Rocking Live Entertainment

After a challenging couple of years, live music is back in full force. Tours, residencies and festivals are returning and filling venues to capacity. Iconic HARMAN Professional brands like JBL, Martin, Crown, AKG, BSS and Soundcraft are providing touring artists and suppliers as well as live venues

CONTINUE READING