JBL Professional VTX V25-II

Größere Bilder

Vollformatige 3-Wege-Hochrichtungs-Linienstrahler mit festem Aufhängungswinkel ASM

Das VTX V25-II ist ein vollformatiges 3-Wege-Hochrichtungs-Linienstrahler-Element mit einem neuen Wellenleiter der 4. Generation, der die Reichweite, Wellenfrontkontrolle verbessert und eine optimierte Leistungsanpassung für die Crown IT4x3500HD bietet. Die Treiberkombination des VTX V25-II besteht aus zwei 2000W 15"-Differential-Drive®-Woofer in Druckgussaluminium-Schallwänden, vier 8"-Differential-Drive-Mitteltöner mit patentiertem Schallabstrahler (RBI Radiation Boundary Integrator®) und drei revolutionären D2 Dual-Diaphragm Dual-Voice-Coil-Kompressionstreibern auf dem neu entwickelten Wellenleiter. Das System wird durch patentierte Beschallungstechnik, Crown I-Tech HD-Verstärkung mit BSS® OmniDriveHD V5 Processing und JBL HiQnet Performance Manager™-Konfigurations- und Steuerungssoftware komplettiert.

Eigenschaften

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Patented JBL S.A.F.E.™ Suspension System
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

Mehr Details

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

VTX S.A.F.E™ Suspension & Laser setup

Next Generation Line Array System Solutions.

JBL’s patented S.A.F.E suspension system is streamlined for speed and efficiency with improved hardware for faster setup with fewer pinning operations and greater security.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

Downloads

Specifications

	Größe	Hochgeladen
VTX V25-II Spec Sheet aktualisiert: Jun 2023	1,26 MB	Jun 2023

Brochures

	Größe	Hochgeladen
VTX V25 System Brochure aktualisiert: Dez 2020	6,48 MB	Dez 2020

CAD Drawings

	Größe	Hochgeladen
V25-II 2D Drawings PDF aktualisiert: Jul 2019	125 KB	Jul 2019
V25 3D Drawings DXF aktualisiert: Jul 2019	208 KB	Jul 2019

Compliances

	Größe	Hochgeladen
VTX V-Series Declaration of Conformity aktualisiert: Dez 2020	158 KB	Dez 2020

Software

	Größe	Hochgeladen
Venue Synthesis veröffentlicht: Jan 2025		Jan 2025
Performance Manager 3 veröffentlicht: Jul 2024		Jul 2024

Ease Data

	Version	Größe	Hochgeladen
VTX V25-II/S28 EASE GLL Version 1.2, aktualisiert: Dez 2020	1.2	29,8 MB	Dez 2020

Preset Libraries

	Version	Größe	Hochgeladen
V25-II Preset Library Version 2.1, aktualisiert: Dez 2020	2.1	595 KB	Dez 2020

Service Notes

	Version	Sprache	Größe	Hochgeladen
VTX V25-II Spare Parts Version A, aktualisiert: Apr 2026	A		72 KB	Apr 2026

Falls einer der obigen Links zu seltsamen Zeichen in Ihrem Browser führt, klicken Sie bitte mit der rechten Maustaste auf die Datei, um sie auf Ihrem Computer zu speichern.

Teile & Service

Spezifikationen

System Type	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Nominal Impedance	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Dimensions (H x W x D)	414 mm x 1223 mm x 614 mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

Zubehör

VTX V25 AF | Array Frame

Größere Bilder

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:

Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
9 pick points available for single point suspension
Optional Extension Bar available
Flexible front-to-back or side-by-side pick point options
Supports up to 24 cabinets (array geometry dependent)
Can be used for ground stack applications
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF
4 x height-adjustable leveling feet for ground stack applications
4 x Quick Release Pins (QRP) for securing top enclosure to the frame

Dokumentation

VTX V25 AF EB | Array Frame

Größere Bilder

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

Features:

Compatible with VTX-V25-AF
2 x pick points available for single point suspension
1 x pick point available for VTX-V25-LH level hoist attachment
Supports up to 24 cabinets (array geometry dependent)
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF-EB extension bar
1 x height-adjustable leveling foot for ground stack applications
2 x Quick Release Pins (QRP) for securing the extension bar to the array frame

Dokumentation

VTX V25 PB | Pull Back Accessory

Größere Bilder

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

Dokumentation

VTX V25 PB Specsheet [539 KB]

VTX V20 DF | UNTEN-FÜLL-ADAPTER

Größere Bilder

Der VTX V20-DF wurde entwickelt, um eine schnelle Befestigung und präzise Ausrichtung von VTX V20 und V25-II / V25-II-CS Systemen zu ermöglichen. Er ist eine leichte Lösung, um eine breitere Abdeckung am unteren Ende von VTX V25-II / V25-II-CS Arrays zu bieten. Das leichte Design bietet mehrere Optionen für den Winkel zwischen V25-II / V25-II-CS und V20 (3,5°, 7,5°, 11°). Kann als Down-Fill-Adaptrahmen für V25-II Arrays oder als Down-Fill-Adaptrahmen + Pullback-Rahmen zur Kompression von VTX V25-II-CS Arrays mit V20 Down-Fill verwendet werden. Unterstützt bis zu 6x VTX V20 Gehäuse, die unter VTX V25-II / V25-II-CS hängend montiert sind.

Eigenschaften:

Winkeloptionen: 3,5°, 7,5°, 11°
Leichtes Design
Präzise HF-Austrittsausrichtung zwischen V25-II und V20
Unterstützung für bis zu 6x VTX V20 Gehäuse

Dokumentation

VTX V20 DF Spec Sheet [568 KB]
VTX V20 DF Suspension Manual (rev2) [852 KB]
VTX V20 DF Customer Drawings [1,42 MB]

VTX V25 ACC | Accessory Cover and Casterboard

Größere Bilder

VTX Series V25 Accessory Kit for transportation and protection of one VTX V25 or VTX V25-II enclosure. Includes: padded, reinforced protective cover with handle cutouts and rear panel access flap; dolly caster-board with rugged tour grade casters and rotating cam mechanisms for secure attachment to the V25 enclosure. Beveled recesses auto-locate with V25 caster board mount tabs. The rotating cam mechanism can be released while V25 or V25-II cabinets are face down during the suspension process (no need to manually remove caster board).

Features:

Compatible with VTX V25 and VTX V25-II
Includes padded protective cover and caster-board
Handle cutouts and rear panel access flap
Speaker cabinets can be tested without fully removing the cover
Tour grade casters
Stackable for convenient storage
Rotating release/lock cam mechanisms for secure attachment to loudspeaker enclosure

Included:

1 x VTX V25 caster-board
1 x padded protective cover

Dokumentation

VTX V25 ACC Specsheet [789 KB]

VTX V25 CS K | COMPRESSION SUSPENSION KIT

Größere Bilder

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes:

2x Suspension frame labels
2x Slot hinge bars
2x ASM bars
2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

Dokumentation

VTX V25 CS K Specsheet [526 KB]
VTX V25 CS K Components [891 KB]

VTX V25 CS K LJ | LABEL KIT

Größere Bilder

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes:

2 spare labels
Label jig installation fixture
Detailed instructions (see documentation download)
NOTE: At least one label jig installation fixture should be ordered
per VTX-V25-CS-K order