VTX V25-II-CS

Full Size 3-Way High-Directivity Line Array With Compression Suspension System

VTX V25-II-CS
Larger Images

Full Size 3-Way High-Directivity Line Array With Compression ASM Suspension System

Features

  • New 4th Generation HF Waveguide technology
  • Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
  • JBL’s patented RBI (Radiation Boundary Integrator®)
  • Cardioid-Arrayable Subwoofer Enclosure Models
  • Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
  • Brand new V25 compression suspension system
  • Accessories optimized for vertical transportation and deployment
  • V5 Processing with Crown I-Tech HD or VRACK
  • JBL HiQnet Performance Manager™ System Configuration and Control
  • Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware
 

Technology

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE
Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY
Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

Downloads

  Version Language Size Uploaded
Specifications
file type icon VTX V25-II-CS Spec Sheet
updated: Oct 2020
    837 KB Oct 2020
Manuals
file type icon VTX V25-II-CS Spare Parts
en version A, updated: Aug 2023
en  73.4 KB Aug 2023
Brochures
file type icon VTX V25 System Brochure
updated: Dec 2020
    6.48 MB Dec 2020
CAD Drawings
file type icon V25-II-CS 2D Drawings PDF
updated: Jul 2019
    122 KB Jul 2019
file type icon V25 3D Drawings DXF
updated: Jul 2019
    208 KB Jul 2019
Compliances
file type icon VTX V-Series Declaration of Conformity
updated: Dec 2020
    158 KB Dec 2020
Software
platform icon PerformanceManager
version 3.0.0, updated: Feb 2024
3.0.0     124 MB Feb 2024
platform icon Line Array Calculator III
version 3.9.0, updated: Feb 2024
3.9.0     24.2 MB Feb 2024
Ease Data
file type icon VTX V25-II/S28 EASE GLL
version 1.2, updated: Dec 2020
1.2    29.8 MB Dec 2020
Preset Libraries
file type icon V25-II Preset Library
version 2.1, updated: Dec 2020
2.1    595 KB Dec 2020

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

Parts & Service

Specifications

System Type Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB) 35 Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB) 90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output LF: 141 dB
MF: 140.5 dB
HF: 149.5 dB
System Amplification Crown Audio I-Tech HD
Nominal Impedance LF: 2x 8 ohms
MF: 8 ohms
HF: 8 ohms
LF Driver (2) JBL 2267H 15-inch woofer
MF Driver (4) JBL 2168H 8-inch mid-frequency driver
HF Driver (3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle 0, 0.5, 0.75, 1, 2, 3, 4, 5, 6, 9
Dimensions (H x W x D) 414 mm x 1223 mm x 61 4mm
16.3 in x 48.2 in x 24.2 in
Net Weight (each) 82.6 kg (182 lb)

Accessories

VTX V25 AF | Array Frame
VTX V25 AF Main photo
Larger Images
Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:
  • Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
  • 9 pick points available for single point suspension
  • Optional Extension Bar available
  • Flexible front-to-back or side-by-side pick point options
  • Supports up to 24 cabinets (array geometry dependent)
  • Can be used for ground stack applications
  • Pick point shackle size: 5/8” or 3/4”
Included:
  • 1 x VTX-V25-AF
  • 4 x height-adjustable leveling feet for ground stack applications
  • 4 x Quick Release Pins (QRP) for securing top enclosure to the frame

Documentation
VTX V25 AF EB | Array Frame
VTX V25 AF EB Main photo
Larger Images
Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.
Features:
  • Compatible with VTX-V25-AF
  • 2 x pick points available for single point suspension
  • 1 x pick point available for VTX-V25-LH level hoist attachment
  • Supports up to 24 cabinets (array geometry dependent)
  • Pick point shackle size: 5/8” or 3/4”
Included:
  • 1 x VTX-V25-AF-EB extension bar
  • 1 x height-adjustable leveling foot for ground stack applications
  • 2 x Quick Release Pins (QRP) for securing the extension bar to the array frame

Documentation
VTX V25 PB | Pull Back Accessory
VTX V25 PB Main photo
Larger Images
Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.
Features:
  • Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
  • Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
  • Supports up to 2000 lbs of pull back force
  • Shackle size: 5/8” (included)
Included:
  • 1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
  • 2 x 5/8” shackles for attaching spreader bar to chain bridle
  • 1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

Documentation
VTX V20 DF | DOWN FILL ADAPTER
VTX V20 DF Main photo
Larger Images
Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays. Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20 (3.5deg, 7.5deg, 11deg). Able to be used as a down-fill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill. Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS.
Features:
  • Angle options: 3.5deg, 7.5deg, 11deg
  • Lightweight design
  • Precise HF exit alignment between V25-II and V20
  • Support for up to 6x VTX V20 cabinets

Documentation
VTX V25 LH | Lever Hoist
VTX V25 LH Main photo
Larger Images
Factory-approved manual lever hoist for compression of VTX V25-II-CS systems. The CM Series 653 for use with VTX V25- II-CS is a 1.5 ton model with 6 meters (20’) of chain length for compressing arrays of up to 24x VTX V25-II-CS or V25-CS cabinets (array geometry dependent) with no additional extension hardware needed.
Features:
  • CM Series 653
  • 1.5 ton model
  • 6 meters (20’) of chain length
  • Support for up to 24 x VTX-V25-II-CS Cabinets (array geometry dependent)
Included:
  • 1 x Columbus McKinnon (CM) Lever Hoist (1.5 ton rating) with 6 meters (20’) of chain

Documentation
VTX V25 VTC | VERTICAL TRANSPORTER
VTX V25 VTC Main photo
Larger Images
The VTX-V25-VTC vertical transporter is a simple and cost-effective solution for vertically transporting VTX V25-II-CS and VTX-V25-CS enclosures in blocks of 3 or 4 cabinets high. Measuring 48.1” wide by 25” deep, the VTX-V25-VTC will travel 4 across (length-wise) in standard 100” trucks. Reinforced protective covers (VTX-V25-VT-CVR) supplied separately.
Features:
  • Vertical transporter for 3x or 4x V25 enclosures
  • Compatible with VTX V25-II-CS and VTX V25-CS
  • Heavy duty locking casters
  • Stackable for easy storage
  • Dimensioned for efficient truck pack
  • Lightweight, rugged construction
Included:
  • 1 x VTX-V25-VTC

Documentation
VTX V25 VT CVR | PADDED COVER
VTX V25 VT CVR Main photo
Larger Images
Reinforced, padded protective cover for 3x or 4x VTX-V25-II-CS enclosures when transported vertically.
Features:
  • Handle cutouts, heavy-duty zippers
  • Modular design, can be used with 3x or 4x VTX V25-II-CS enclosures
  • Rear panel access flaps for input connectors
  • Speaker cabinets can be tested without fully removing the cover
  • Lightweight, durable construction
Included:
  • 1 x VTX-V25-VT-CVR

Documentation

Support/FAQs

HARMAN Professional Solutions:

VTX V25-II-CS

Full Size 3-Way High-Directivity Line Array With Compression Suspension System