JBL Professional VTX V25-II-CS

រូបភាពធំជាង

Full Size 3-Way High-Directivity Line Array With Compression ASM Suspension System

លក្ខណៈពិសេស

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Brand new V25 compression suspension system
Accessories optimized for vertical transportation and deployment
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

ព័ត៌មានលម្អិត

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

ការទាញយក

Specifications

	ទំហំ	បានផ្ទុកឡើង
VTX V25-II-CS Spec Sheet បានធ្វើបច្ចុប្បន្នភាព: តុលា 2020	837 KB	តុលា 2020

Brochures

	ទំហំ	បានផ្ទុកឡើង
VTX V25 System Brochure បានធ្វើបច្ចុប្បន្នភាព: ធ្នូ 2020	6.48 MB	ធ្នូ 2020

CAD Drawings

	ទំហំ	បានផ្ទុកឡើង
V25-II-CS 2D Drawings PDF បានធ្វើបច្ចុប្បន្នភាព: កក្កដា 2019	122 KB	កក្កដា 2019
V25 3D Drawings DXF បានធ្វើបច្ចុប្បន្នភាព: កក្កដា 2019	208 KB	កក្កដា 2019

Compliances

	ទំហំ	បានផ្ទុកឡើង
VTX V-Series Declaration of Conformity បានធ្វើបច្ចុប្បន្នភាព: ធ្នូ 2020	158 KB	ធ្នូ 2020

Software

	ទំហំ	បានផ្ទុកឡើង
Venue Synthesis ចេញផ្សាយ: មករា 2025		មករា 2025
Performance Manager 3 ចេញផ្សាយ: កក្កដា 2024		កក្កដា 2024

Ease Data

	កំណែ	ទំហំ	បានផ្ទុកឡើង
VTX V25-II/S28 EASE GLL កំណែ 1.2, បានធ្វើបច្ចុប្បន្នភាព: ធ្នូ 2020	1.2	29.8 MB	ធ្នូ 2020

Preset Libraries

	កំណែ	ទំហំ	បានផ្ទុកឡើង
V25-II Preset Library កំណែ 2.1, បានធ្វើបច្ចុប្បន្នភាព: ធ្នូ 2020	2.1	595 KB	ធ្នូ 2020

Service Notes

	កំណែ	ភាសា	ទំហំ	បានផ្ទុកឡើង
VTX V25-II-CS Spare Parts កំណែ A, បានធ្វើបច្ចុប្បន្នភាព: មេសា 2026	A		73.4 KB	មេសា 2026

ប្រសិនបើតំណភ្ជាប់ខាងលើបង្ហាញអក្សរចម្លែកក្នុងកម្មវិធីរុករករបស់អ្នក សូមចុចខាងស្តាំលើឯកសារដើម្បីរក្សាទុកទៅកុំព្យូទ័ររបស់អ្នក។

ផ្នែក និងសេវាកម្ម

លក្ខណៈពិសេស

System Type	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35 Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Nominal Impedance	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 0.5, 0.75, 1, 2, 3, 4, 5, 6, 9
Dimensions (H x W x D)	414 mm x 1223 mm x 61 4mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

គ្រឿងបន្លាស់

VTX V25 AF | Array Frame

រូបភាពធំជាង

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:

Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
9 pick points available for single point suspension
Optional Extension Bar available
Flexible front-to-back or side-by-side pick point options
Supports up to 24 cabinets (array geometry dependent)
Can be used for ground stack applications
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF
4 x height-adjustable leveling feet for ground stack applications
4 x Quick Release Pins (QRP) for securing top enclosure to the frame

ឯកសារ

VTX V25 AF EB | Array Frame

រូបភាពធំជាង

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

Features:

Compatible with VTX-V25-AF
2 x pick points available for single point suspension
1 x pick point available for VTX-V25-LH level hoist attachment
Supports up to 24 cabinets (array geometry dependent)
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF-EB extension bar
1 x height-adjustable leveling foot for ground stack applications
2 x Quick Release Pins (QRP) for securing the extension bar to the array frame

ឯកសារ

VTX V25 PB | Pull Back Accessory

រូបភាពធំជាង

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

ឯកសារ

VTX V25 PB Specsheet [539 KB]

VTX V20 DF | ក្របង្ហាប់ចុះក្រោម

រូបភាពធំជាង

ត្រូវបានរចនាឡើងដើម្បីសម្ភាសជ្រើសរើសលឿន និងការតម្រឹមយ៉ាងច្បាស់លាស់នៃប្រព័ន្ធ VTX V20 និង V25-II / V25-II-CS ដែល VTX V20-DF គឺជាដំណោះស្រាយលម្ហាក់ស្រាល់សម្រាប់ការផ្តល់នូវការគ្របដណ្តប់ដ៏ធំទូលាយនៅផ្នែកខាងក្រោមនៃម៉ាស់ VTX V25-II / V25-II-CS ។ ការរចនាលម្ហាក់ស្រាល់ជាមួយនឹងជម្រើសច្រើនសម្រាប់មុំរវាង V25-II / V25-II-CS និង V20 (3.5deg, 7.5deg, 11deg) ។ អាចប្រើបានជាក្របរាងសម្រាប់ការបំពេញបន្ថែមចុងក្រោមសម្រាប់ម៉ាស់ V25-II ឬជាក្របរាងសម្រាប់ការបំពេញបន្ថែមចុងក្រោម + ក្របរាងទាញក្រឡេកសម្រាប់ការបង្រួមម៉ាស់ VTX V25-II-CS ដែលមាន V20 downfill ។ ផ្តល់ជូនមូលដ្ឋានគាំទ្រសម្រាប់ក្សេត្របដែលមាន 6x VTX V20 ដែលព្យួរក្រោម VTX V25-II / V25-II-CS ។

លក្ខណៈពិសេស:

ជម្រើសមុំ៖ 3.5deg, 7.5deg, 11deg
ការរចនាលម្ហាក់ស្រាល់
ការតម្រឹម HF ដែលច្បាស់លាស់រវាង V25-II និង V20
ការគាំទ្របច្ច័យសម្រាប់ក្សេត្របដែលមាន 6x VTX V20

ឯកសារ

VTX V20 DF Spec Sheet [568 KB]
VTX V20 DF Suspension Manual (rev2) [852 KB]
VTX V20 DF Customer Drawings [1.42 MB]

VTX V25 LH | Lever Hoist

រូបភាពធំជាង

Factory-approved manual lever hoist for compression of VTX V25-II-CS systems. The CM Series 653 for use with VTX V25- II-CS is a 1.5 ton model with 6 meters (20’) of chain length for compressing arrays of up to 24x VTX V25-II-CS or V25-CS cabinets (array geometry dependent) with no additional extension hardware needed.

Features:

CM Series 653
1.5 ton model
6 meters (20’) of chain length
Support for up to 24 x VTX-V25-II-CS Cabinets (array geometry dependent)

Included:

1 x Columbus McKinnon (CM) Lever Hoist (1.5 ton rating) with 6 meters (20’) of chain

ឯកសារ

VTX V25 LH Specsheet [432 KB]
VTX V25 LH User Manual [858 KB]

VTX V25 VTC | VERTICAL TRANSPORTER

រូបភាពធំជាង

The VTX-V25-VTC vertical transporter is a simple and cost-effective solution for vertically transporting VTX V25-II-CS and VTX-V25-CS enclosures in blocks of 3 or 4 cabinets high. Measuring 48.1” wide by 25” deep, the VTX-V25-VTC will travel 4 across (length-wise) in standard 100” trucks. Reinforced protective covers (VTX-V25-VT-CVR) supplied separately.

Features: