JBL Professional VTX V25-II-CS

큰 이미지

Full Size 3-Way High-Directivity Line Array With Compression ASM Suspension System

특징

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Brand new V25 compression suspension system
Accessories optimized for vertical transportation and deployment
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

더 알아보기

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

다운로드

Specifications

	크기	업로드 날짜
VTX V25-II-CS Spec Sheet 업데이트: 2020년 10월	837KB	2020년 10월

Brochures

	크기	업로드 날짜
VTX V25 System Brochure 업데이트: 2020년 12월	6.48MB	2020년 12월

CAD Drawings

	크기	업로드 날짜
V25-II-CS 2D Drawings PDF 업데이트: 2019년 7월	122KB	2019년 7월
V25 3D Drawings DXF 업데이트: 2019년 7월	208KB	2019년 7월

Compliances

	크기	업로드 날짜
VTX V-Series Declaration of Conformity 업데이트: 2020년 12월	158KB	2020년 12월

Software

	크기	업로드 날짜
Venue Synthesis 출시: 2025년 1월		2025년 1월
Performance Manager 3 출시: 2024년 7월		2024년 7월

Ease Data

	버전	크기	업로드 날짜
VTX V25-II/S28 EASE GLL 버전 1.2, 업데이트: 2020년 12월	1.2	29.8MB	2020년 12월

Preset Libraries

	버전	크기	업로드 날짜
V25-II Preset Library 버전 2.1, 업데이트: 2020년 12월	2.1	595KB	2020년 12월

Service Notes

	버전	언어	크기	업로드 날짜
VTX V25-II-CS Spare Parts 버전 A, 업데이트: 2026년 4월	A		73.4KB	2026년 4월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하세요.

부품 및 서비스

사양

System Type	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35 Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Nominal Impedance	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 0.5, 0.75, 1, 2, 3, 4, 5, 6, 9
Dimensions (H x W x D)	414 mm x 1223 mm x 61 4mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

액세서리

VTX V25 AF | Array Frame

큰 이미지

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:

Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
9 pick points available for single point suspension
Optional Extension Bar available
Flexible front-to-back or side-by-side pick point options
Supports up to 24 cabinets (array geometry dependent)
Can be used for ground stack applications
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF
4 x height-adjustable leveling feet for ground stack applications
4 x Quick Release Pins (QRP) for securing top enclosure to the frame

문서

VTX V25 AF EB | Array Frame

큰 이미지

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

Features:

Compatible with VTX-V25-AF
2 x pick points available for single point suspension
1 x pick point available for VTX-V25-LH level hoist attachment
Supports up to 24 cabinets (array geometry dependent)
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF-EB extension bar
1 x height-adjustable leveling foot for ground stack applications
2 x Quick Release Pins (QRP) for securing the extension bar to the array frame

문서

VTX V25 PB | Pull Back Accessory

큰 이미지

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

문서

VTX V25 PB Specsheet [539KB]

VTX V20 DF | DOWN FILL ADAPTER

큰 이미지

Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays. Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20 (3.5deg, 7.5deg, 11deg). Able to be used as a down-fill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill. Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS.

Features:

Angle options: 3.5deg, 7.5deg, 11deg
Lightweight design
Precise HF exit alignment between V25-II and V20
Support for up to 6x VTX V20 cabinets

문서

VTX V20 DF Spec Sheet [568KB]
VTX V20 DF Suspension Manual (rev2) [852KB]
VTX V20 DF Customer Drawings [1.42MB]

VTX V25 LH | Lever Hoist

큰 이미지

Factory-approved manual lever hoist for compression of VTX V25-II-CS systems. The CM Series 653 for use with VTX V25- II-CS is a 1.5 ton model with 6 meters (20’) of chain length for compressing arrays of up to 24x VTX V25-II-CS or V25-CS cabinets (array geometry dependent) with no additional extension hardware needed.

Features:

CM Series 653
1.5 ton model
6 meters (20’) of chain length
Support for up to 24 x VTX-V25-II-CS Cabinets (array geometry dependent)

Included:

1 x Columbus McKinnon (CM) Lever Hoist (1.5 ton rating) with 6 meters (20’) of chain

문서

VTX V25 LH Specsheet [432KB]
VTX V25 LH User Manual [858KB]

VTX V25 VTC | VERTICAL TRANSPORTER

큰 이미지

The VTX-V25-VTC vertical transporter is a simple and cost-effective solution for vertically transporting VTX V25-II-CS and VTX-V25-CS enclosures in blocks of 3 or 4 cabinets high. Measuring 48.1” wide by 25” deep, the VTX-V25-VTC will travel 4 across (length-wise) in standard 100” trucks. Reinforced protective covers (VTX-V25-VT-CVR) supplied separately.

Features: