Features
- New 4th Generation HF Waveguide technology
- Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
- JBL’s patented RBI (Radiation Boundary Integrator®)
- Cardioid-Arrayable Subwoofer Enclosure Models
- Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
- Brand new V25 compression suspension system
- Accessories optimized for vertical transportation and deployment
- V5 Processing with Crown I-Tech HD or VRACK
- JBL HiQnet Performance Manager™ System Configuration and Control
- Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware
Technology

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER
The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.
LEARN MORE
VTX V25-II WAVEGUIDE
Improved Wavefront ControlThe V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.
LEARN MORE
DIFFERENTIAL DRIVE® TECHNOLOGY
Enhanced Performance and Dramatically Reduced Driver WeightJBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.
LEARN MORE
VTX LASER ACCESSORIES
Precision Pattern Control.Precise VTX V25 vertical pattern control requires precise focus for optimum audience coverage and the VTX-LZ laser accessory provides a cost-effective installation tool to help streamline the setup process.
LEARN MORESystem Integration

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.
LEARN MORETraining & Support

In addition to designing the most sophisticated sound reinforcement system available, JBL Professional provides the expertise to achieve the maximum performance possible. Our 65+ years of expertise in the use of systems in venues around the world is an invaluable resource that is at the core of our training curriculum, helping you to maximize both the use and your investment in the VTX System.
LEARN MOREDownloads
Size | ||||
Specifications | ||||
updated: Oct 2020
|
837 KB | |||
Brochures | ||||
updated: Dec 2020
|
6.48 MB | |||
CAD Drawings | ||||
updated: Jul 2019
|
122 KB | |||
updated: Jul 2019
|
208 KB | |||
Compliances | ||||
updated: Dec 2020
|
158 KB | |||
Software | ||||
version 3.8.0.128,
updated: Oct 2022
|
24.2 MB | |||
version 2.9.1.5,
updated: Dec 2022
|
117 MB | |||
Ease Data | ||||
version 1.2,
updated: Dec 2020
|
29.8 MB | |||
Preset Libraries | ||||
version 2.1,
updated: Dec 2020
|
595 KB |
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.
Parts & Service
Specifications
System Type | Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers |
Frequency Range (-10dB) | 35 Hz - 18 kHz (Preset: VTX V25-II) |
Horizontal Coverage (-6 dB) | 90 degrees nominal (200 Hz - 16 kHz) |
Maximum Peak Output | 141 dB (Preset: VTX V25-II) |
System Amplification | Crown Audio I-Tech HD |
Nominal Impedance | LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms |
LF Driver | (2) JBL 2267H 15-inch woofer |
MF Driver | (4) JBL 2168H 8-inch mid-frequency driver |
HF Driver | (3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver |
Enclosure | Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles |
Inter-enclosure Angle | 0, 0.5, 0.75, 1, 2, 3, 4, 5, 6, 9 |
Dimensions (H x W x D) | 414 mm x 1223 mm x 61 4mm 16.3 in x 48.2 in x 24.2 in |
Net Weight (each) | 82.6 kg (182 lb) |
Accessories
VTX V25 AF | Array Frame
Features:
- Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
- 9 pick points available for single point suspension
- Optional Extension Bar available
- Flexible front-to-back or side-by-side pick point options
- Supports up to 24 cabinets (array geometry dependent)
- Can be used for ground stack applications
- Pick point shackle size: 5/8” or 3/4”
- 1 x VTX-V25-AF
- 4 x height-adjustable leveling feet for ground stack applications
- 4 x Quick Release Pins (QRP) for securing top enclosure to the frame
Documentation
-
VTX V25 AF Specsheet [562 KB]
-
VTX V25 AF 2D Drawing [123 KB]
-
VTX V25 AF 3D Drawings [2.23 MB]
VTX V25 AF EB | Array Frame
- Compatible with VTX-V25-AF
- 2 x pick points available for single point suspension
- 1 x pick point available for VTX-V25-LH level hoist attachment
- Supports up to 24 cabinets (array geometry dependent)
- Pick point shackle size: 5/8” or 3/4”
- 1 x VTX-V25-AF-EB extension bar
- 1 x height-adjustable leveling foot for ground stack applications
- 2 x Quick Release Pins (QRP) for securing the extension bar to the array frame
Documentation
-
VTX V25 AF EB Specsheet [699 KB]
-
VTX V25 AF EB 3D Drawing [5.36 MB]
-
VTX V25 AF EB 2D Drawings [266 KB]
VTX V25 PB | Pull Back Accessory
- Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
- Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
- Supports up to 2000 lbs of pull back force
- Shackle size: 5/8” (included)
- 1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
- 2 x 5/8” shackles for attaching spreader bar to chain bridle
- 1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device
Documentation
-
VTX V25 PB Specsheet [539 KB]
VTX V20 DF | DOWN FILL ADAPTER
- Angle options: 3.5deg, 7.5deg, 11deg
- Lightweight design
- Precise HF exit alignment between V25-II and V20
- Support for up to 6x VTX V20 cabinets
Documentation
-
VTX V20 DF Spec Sheet [568 KB]
-
VTX V20 DF Suspension Manual (rev2) [852 KB]
-
VTX V20 DF Customer Drawings [1.42 MB]
VTX V25 LH | Lever Hoist
- CM Series 653
- 1.5 ton model
- 6 meters (20’) of chain length
- Support for up to 24 x VTX-V25-II-CS Cabinets (array geometry dependent)
- 1 x Columbus McKinnon (CM) Lever Hoist (1.5 ton rating) with 6 meters (20’) of chain
Documentation
-
VTX V25 LH Specsheet [432 KB]
-
VTX V25 LH User Manual [858 KB]
VTX V25 VTC | VERTICAL TRANSPORTER
- Vertical transporter for 3x or 4x V25 enclosures
- Compatible with VTX V25-II-CS and VTX V25-CS
- Heavy duty locking casters
- Stackable for easy storage
- Dimensioned for efficient truck pack
- Lightweight, rugged construction
- 1 x VTX-V25-VTC
Documentation
-
VTX V25 VTC Specsheet [3.32 MB]
VTX V25 VT CVR | PADDED COVER
- Handle cutouts, heavy-duty zippers
- Modular design, can be used with 3x or 4x VTX V25-II-CS enclosures
- Rear panel access flaps for input connectors
- Speaker cabinets can be tested without fully removing the cover
- Lightweight, durable construction
- 1 x VTX-V25-VT-CVR
Documentation
-
VTX V25 VT CVR Specsheet [524 KB]