JBL Professional COL600

较大的图像

JBL COL600 是一款优雅的 24 英寸（600 毫米）超薄柱形音箱，提供宽水平覆盖和窄垂直覆盖。内置 10° 向下倾斜设计，可为大多数听音区域提供最佳覆盖效果，同时允许音箱平贴墙面安装。该超薄紧凑的设计获得多项国际工业设计奖项，可与几乎任何建筑装饰风格完美融合。

COL600 融合了时尚设计和卓越性能，适用于会议室、讲堂、零售店、候车厅、过渡区、补声应用、视频配音以及其他需要超薄紧凑设计和高性能的应用场景。

两个 5 英寸 × 2.25 英寸赛道形低音单元在柱形因子中提供最大辐射面积。高音单元位于阵列顶部，可确保听音空间的覆盖受阻最少，并采用向下角度设计，即使柜体平贴墙面也能实现向下倾斜覆盖。浅柜深度 3.7 英寸（93 毫米）符合 ADA（美国残疾人法案）项目要求，将柜体后侧紧贴墙面安装时满足该标准。

20 W 多抽头变压器支持 70V 或 100V 分布式扬声器线路使用，音箱可切换至 8 Ω 直接操作模式，功率处理能力为 80W 连续（320W 峰值，2 小时）。70 Hz 至 20 kHz 的频率范围为音乐或语音提供清晰、明亮的声音。

多功能安装方式由两个随附 L 形支架实现，可安装在顶部和底部面板（用于水平调节）或左右侧面板。两种安装位置均支持贴近墙面安装。此外还包括一个低调旋转/倾斜墙面支架，可额外增加最多 10° 的向下倾斜角度调节（在音箱平贴墙面安装时的内置 10° 向下倾斜基础上）。

COL600 具有 IP54 等级（符合 IEC60529 标准），可有效防护灰尘和水的侵入。驱动单元采用防水处理工艺，格栅配备防水衬垫，并附随防护盖板以保护输入端子。提供黑色（JBL-COL600-BK）或白色（JBL-COL600-WH）两种颜色。

特点

两个 5 × 2.25 英寸跑道形低音单元和一个 1 英寸高音单元
高 24 英寸，机柜深度仅 3.7 英寸
160° 宽水平覆盖和 110° 集中垂直覆盖
10° 向下倾角，可覆盖大多数听音区域，无需对机柜进行物理倾斜
80W 连续粉噪声功率处理（320W 峰值）
70 Hz – 20 kHz 频率范围
内置 20W 70V/100V 多抽头变压器，另配 8 Ω 直接输入
峰值 SPL 111 dB（连续 105 dB），2 小时
高音单元位于立柱顶部，听音空间无遮挡覆盖
包含多功能安装支架组件

下载

Brochures

	版本	语言	大小	上传日期
Control Contractor Brochure (2024) 版本 D, 更新: 2月 2024	D		14.0 MB	2月 2024

CAD Drawings

	语言	大小	上传日期
COL600 2D and 3D Drawings 更新: 7月 2023		2.9 MB	7月 2023
COL Wall Bracket 2D and 3D Drawings 更新: 7月 2023		17.2 MB	7月 2023

BIM Objects

	大小	上传日期
COL600 BIM Object 更新: 4月 2024		4月 2024

Install Guides

	语言	大小	上传日期
COL600 & COL800 Installation Guide 更新: 6月 2023		1.3 MB	6月 2023

EASE Files

	大小	上传日期
COL600 - EASE File 更新: 9月 2023	1.2 MB	9月 2023

CLF Files

	大小	上传日期
COL600 - CLF File 更新: 1月 2024	353.8 KB	1月 2024

Spec Sheets

	语言	大小	上传日期
COL600 Spec Sheet 更新: 3月 2025		689.6 KB	3月 2025

Speaker Tunings

	大小	上传日期
COL Series - SpeakerTuning file for Crown DCi Series Amplifiers 更新: 10月 2025	63.6 KB	10月 2025

如果上述任何链接在您的浏览器中显示为奇怪的字符，请右键点击文件以将其保存到您的计算机。

零件与服务

性能

Frequency Range (-10 dB)¹	70 Hz – 20 kHz
频率响应(±3 dB)	105 Hz – 20 kHz
Power Rating (8Ω setting)2	160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs)
Sensitivity (2.83V @ 1m)	86 dB
覆盖范围	Vertical 110° [1kHz-4 kHz average]; 10° down-tilt to aiming access for+45°/-65° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average]
Directivity (Q)	7.8
Directivity Index (DI)	8.9 dB
额定最大声压级	105 dB Continuous (111 dB peak) @ 1m
标称阻抗	8Ω (in Thru/direct mode)
Minimum Impedance	7.0 Ω@ 275 Hz
变压器抽头	20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8Ω thru, selectable via switch
变压器插入损耗	Less than 1 dB for all taps
Maximum Input Voltage	21 V RMS (2 hrs), 42 V peak
建议的保护高通	70 Hz for 8 Ω operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W).
Drivers	Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space)
音箱材料	PC + ABS, UL94-V0 flammability rating
网罩	Plated SPCC with polyester powder coat finish
Agency Ratings	Transformer UL recognized. RoHS, REACH compliance. LVD for CE.
Environmental Rating	IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006]
Terminals	4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in)
Insert Points	Back Panel: 2 threaded insert points for WALL BRACKET; attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.]
装配	Multiple mounting methods (see Installation Guide for more details): Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method.
尺寸（高 x 宽 x 厚）	598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches)
净重量	3.5 kg (7.8 lbs) each
运输重量	4.5 kg (10.0 lbs) each (packed 1 speaker per carton)
随附配件	Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points.
SKU Numbers and Colors	JBL-COL600-BK (black, RAL9004), JBL-COL600-WH (white, RAL9016)

支援/最常见问题

HARMAN Professional Solutions:

find_dealer

have_question

顾问支持

COL600

特点

更多详情

下载

零件与服务

性能

支援/最常见问题

COL600