JBL Professional COL600

画像を拡大

The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor.

A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.

Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall.

A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech.

Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall).

The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Available in black (JBL-COL600-BK) or white (JBL-COL600-WH).

特長

5 x 2.25インチのレーストラック型ウーファー2基と1インチツイーター1基
高さ24インチ、キャビネット奥行き3.7インチの薄型設計
水平方向160°の広いカバレッジと、垂直方向110°の絞り込まれたカバレッジ
10°の下向きチルトにより、キャビネット自体を物理的に傾けることなく、大半のリスニングエリアをカバー
80Wの連続ピンクノイズ耐入力（ピーク320W）
周波数レンジ：70 Hz～20 kHz
20W 70V/100Vマルチタップトランスを内蔵、8Ω直接入力にも対応
ピークSPL 111 dB（連続105 dB）、2時間
ツイーターをコラム上部付近に配置し、リスニングスペースを遮るものなくカバー
柔軟な取り付けが可能なマウントブラケットが付属 – 両方

詳細情報

JBL COL600スリムカラムスピーカーは、会議室、講堂、小売店舗、コンコース、交通施設などの空間に加え、フィル用途や映像用のオーディオなど、スリムでコンパクトな設計と高性能が求められる幅広い用途に最適です。

ダウンロード

Brochures

	バージョン	言語	サイズ	アップロード済み
Control Contractor Brochure (2024) バージョン D, 更新: 2024年2月	D		14MB	2024年2月

CAD Drawings

	言語	サイズ	アップロード済み
COL600 2D and 3D Drawings 更新: 2023年7月		2.92MB	2023年7月
COL Wall Bracket 2D and 3D Drawings 更新: 2023年7月		17.2MB	2023年7月

BIM Objects

	サイズ	アップロード済み
COL600 BIM Object 更新: 2024年4月		2024年4月

Install Guides

	言語	サイズ	アップロード済み
COL600 & COL800 Installation Guide 更新: 2023年6月		1.26MB	2023年6月

EASE Files

	サイズ	アップロード済み
COL600 - EASE File 更新: 2023年9月	1.18MB	2023年9月

CLF Files

	サイズ	アップロード済み
COL600 - CLF File 更新: 2024年1月	354KB	2024年1月

Spec Sheets

	言語	サイズ	アップロード済み
COL600 Spec Sheet 更新: 2025年3月		690KB	2025年3月

Speaker Tunings

	サイズ	アップロード済み
COL Series - SpeakerTuning file for Crown DCi Series Amplifiers 更新: 2025年10月	63.6KB	2025年10月

上記のリンクをクリックしてブラウザで文字化けが発生する場合は、ファイルを右クリックしてコンピューターに保存してください。

パーツ＆サービス

仕様

Frequency Range (-10 dB)¹	70 Hz – 20 kHz
Frequency Response (±3 dB)	105 Hz – 20 kHz
Power Rating (8Ω setting)2	160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs)
Sensitivity (2.83V @ 1m)	86 dB
Coverage Pattern	Vertical 110° [1kHz-4 kHz average]; 10° down-tilt to aiming access for+45°/-65° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average]
Directivity (Q)	7.8
Directivity Index (DI)	8.9 dB
Rated Maximum SPL	105 dB Continuous (111 dB peak) @ 1m
Nominal Impedance	8Ω (in Thru/direct mode)
Minimum Impedance	7.0 Ω@ 275 Hz
Transformer Taps	20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8Ω thru, selectable via switch
Transformer Insertion Loss	Less than 1 dB for all taps
Maximum Input Voltage	21 V RMS (2 hrs), 42 V peak
Recommended Protective High-Pass	70 Hz for 8 Ω operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W).
Drivers	Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space)
Enclosure Material	PC + ABS, UL94-V0 flammability rating
Grille	Plated SPCC with polyester powder coat finish
Agency Ratings	Transformer UL recognized. RoHS, REACH compliance. LVD for CE.
Environmental Rating	IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006]
Terminals	4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in)
Insert Points	Back Panel: 2 threaded insert points for WALL BRACKET; attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.]
Mounting	Multiple mounting methods (see Installation Guide for more details): Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method.
Dimensions (H x W x D)	598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches)
Net Weight	3.5 kg (7.8 lbs) each
Shipping Weight	4.5 kg (10.0 lbs) each (packed 1 speaker per carton)
Included Accessories	Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points.
SKU Numbers and Colors	JBL-COL600-BK (black, RAL9004), JBL-COL600-WH (white, RAL9016)