JBL Professional VTX V25-II

Hình ảnh lớn hơn

Full Size 3-Way High-Directivity Line Array With Fixed Angle ASM Suspension

The VTX V25-II is a full size 3-way high-directivity line array element that includes a new 4th generation waveguide which improves long throw performance, wavefront control, and is an improved power match for the Crown IT4x3500HD. The transducer compliment for VTX V25-II is two 2000W 15" Differential Drive® woofers mounted in die cast aluminum baffles, four 8" Differential Drive midrange transducers firing through a patented (RBI Radiation Boundary Integrator®), and three revolutionary D2 Dual-Diaphragm Dual-Voice-Coil Compression Drivers loaded onto the newly designed waveguide. Patented rigging, Crown I-Tech HD amplification with BSS ® OmniDriveHD V5 Processing, and JBL HiQnet Performance Manager™ configuration and control software complete the system package.

Tính năng

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Patented JBL S.A.F.E.™ Suspension System
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

Thêm Chi tiết

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

VTX S.A.F.E™ Suspension & Laser setup

Next Generation Line Array System Solutions.

JBL’s patented S.A.F.E suspension system is streamlined for speed and efficiency with improved hardware for faster setup with fewer pinning operations and greater security.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

Tải xuống

Specifications

	Kích thước	Đã tải lên
VTX V25-II Spec Sheet cập nhật: Thg 6 2023	1 MB	Thg 6 2023

Brochures

	Kích thước	Đã tải lên
VTX V25 System Brochure cập nhật: Thg 12 2020	6 MB	Thg 12 2020

CAD Drawings

	Kích thước	Đã tải lên
V25-II 2D Drawings PDF cập nhật: Thg 7 2019	100 KB	Thg 7 2019
V25 3D Drawings DXF cập nhật: Thg 7 2019	200 KB	Thg 7 2019

Compliances

	Kích thước	Đã tải lên
VTX V-Series Declaration of Conformity cập nhật: Thg 12 2020	200 KB	Thg 12 2020

Software

	Kích thước	Đã tải lên
Venue Synthesis phát hành: Thg 1 2025		Thg 1 2025
Performance Manager 3 phát hành: Thg 7 2024		Thg 7 2024

Ease Data

	Phiên bản	Kích thước	Đã tải lên
VTX V25-II/S28 EASE GLL phiên bản 1.2, cập nhật: Thg 12 2020	1.2	30 MB	Thg 12 2020

Preset Libraries

	Phiên bản	Kích thước	Đã tải lên
V25-II Preset Library phiên bản 2.1, cập nhật: Thg 12 2020	2.1	600 KB	Thg 12 2020

Service Notes

	Phiên bản	Ngôn ngữ	Kích thước	Đã tải lên
VTX V25-II Spare Parts phiên bản A, cập nhật: Thg 4 2026	A		70 KB	Thg 4 2026

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Phụ tùng & Dịch vụ

Thông số kỹ thuật

System Type	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Nominal Impedance	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Dimensions (H x W x D)	414 mm x 1223 mm x 614 mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

Phụ kiện

VTX V25 AF | Array Frame

Hình ảnh lớn hơn

Array Frame used for suspending or ground stacking VTX V25 series enclosures. The VTX-V25-AF is also compatible with the VTX S28 dual 18” subwoofer enclosures. Includes height-adjustable leveling feet for ground stack applications. Optional VTX-V25-AF-EB extension bar available.

Features:

Compatible with VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS and VTX S28
9 pick points available for single point suspension
Optional Extension Bar available
Flexible front-to-back or side-by-side pick point options
Supports up to 24 cabinets (array geometry dependent)
Can be used for ground stack applications
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF
4 x height-adjustable leveling feet for ground stack applications
4 x Quick Release Pins (QRP) for securing top enclosure to the frame

Tài liệu

VTX V25 AF EB | Array Frame

Hình ảnh lớn hơn

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

Features:

Compatible with VTX-V25-AF
2 x pick points available for single point suspension
1 x pick point available for VTX-V25-LH level hoist attachment
Supports up to 24 cabinets (array geometry dependent)
Pick point shackle size: 5/8” or 3/4”

Included:

1 x VTX-V25-AF-EB extension bar
1 x height-adjustable leveling foot for ground stack applications
2 x Quick Release Pins (QRP) for securing the extension bar to the array frame

Tài liệu

VTX V25 PB | Pull Back Accessory

Hình ảnh lớn hơn

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

Tài liệu

VTX V25 PB Specsheet [500 KB]

VTX V20 DF | BỘ ĐIỀU HỢP ĐỔLÀ XUỐNG

Hình ảnh lớn hơn

Được thiết kế để tạo điều kiện gắn kết nhanh chóng và căn chỉnh chính xác các hệ thống VTX V20 và V25-II / V25-II-CS, VTX V20-DF là giải pháp nhẹ để cung cấp phạm vi phủ sóng rộng hơn ở phía dưới của các mảng VTX V25-II / V25-II-CS. Thiết kế nhẹ với nhiều tùy chọn góc độ giữa V25-II / V25-II-CS và V20 (3,5deg, 7,5deg, 11deg). Có thể được sử dụng như khung bộ điều hợp đổ xuống cho các mảng V25-II, hoặc như khung bộ điều hợp đổ xuống + khung kéo lại cho việc nén các mảng VTX V25-II-CS với đổ xuống V20. Hỗ trợ tối đa 6 tủ VTX V20 treo dưới VTX V25-II / V25-II-CS.

Tính năng:

Tùy chọn góc độ: 3,5deg, 7,5deg, 11deg
Thiết kế nhẹ
Căn chỉnh chính xác lối thoát HF giữa V25-II và V20
Hỗ trợ tối đa 6 tủ VTX V20

Tài liệu

VTX V20 DF Spec Sheet [600 KB]
VTX V20 DF Suspension Manual (rev2) [900 KB]
VTX V20 DF Customer Drawings [1 MB]

VTX V25 ACC | Accessory Cover and Casterboard

Hình ảnh lớn hơn

VTX Series V25 Accessory Kit for transportation and protection of one VTX V25 or VTX V25-II enclosure. Includes: padded, reinforced protective cover with handle cutouts and rear panel access flap; dolly caster-board with rugged tour grade casters and rotating cam mechanisms for secure attachment to the V25 enclosure. Beveled recesses auto-locate with V25 caster board mount tabs. The rotating cam mechanism can be released while V25 or V25-II cabinets are face down during the suspension process (no need to manually remove caster board).

Features:

Compatible with VTX V25 and VTX V25-II
Includes padded protective cover and caster-board
Handle cutouts and rear panel access flap
Speaker cabinets can be tested without fully removing the cover
Tour grade casters
Stackable for convenient storage
Rotating release/lock cam mechanisms for secure attachment to loudspeaker enclosure

Included:

1 x VTX V25 caster-board
1 x padded protective cover

Tài liệu

VTX V25 ACC Specsheet [800 KB]

VTX V25 CS K | COMPRESSION SUSPENSION KIT

Hình ảnh lớn hơn

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes:

2x Suspension frame labels
2x Slot hinge bars
2x ASM bars
2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

Tài liệu

VTX V25 CS K Specsheet [500 KB]
VTX V25 CS K Components [900 KB]

VTX V25 CS K LJ | LABEL KIT

Hình ảnh lớn hơn

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes:

2 spare labels
Label jig installation fixture
Detailed instructions (see documentation download)
NOTE: At least one label jig installation fixture should be ordered
per VTX-V25-CS-K order

Tài liệu

VTX V25 CS K LJ Shetsheet [400 KB]
VTX V25 CS K LJ Installation Guide [9 MB]

HARMAN Pro Insights

Backstage Pass to 8 Pro Audio & Lighting Shows Rocking Live Entertainment

After a challenging couple of years, live music is back in full force. Tours, residencies and festivals are returning and filling venues to capacity. Iconic HARMAN Professional brands like JBL, Martin, Crown, AKG, BSS and Soundcraft are providing touring artists and suppliers as well as live venues

CONTINUE READING

Hỗ trợ/FAQ

HARMAN Professional Solutions:

find_dealer

have_question

Hỗ trợ Tư vấn viên