JBL Professional Control 28-1L

Imagens maiores

Altifalante de Saída Elevada de 8 Ohm para Interior/Exterior para Música Ambiente/Primeiro Plano

O Control® 28-1L é um altifalante de duas vias com 8" de diâmetro e carácter sonoro rico, cobertura ampla e consistente, montagem versátil e um design contemporâneo e sofisticado que se integra numa vasta gama de espaços. Isto torna o Control 28-1L uma escolha excelente para uma ampla variedade de aplicações, incluindo lojas de retalho, restaurantes, ginásios, parques temáticos, instalações de ensino, hotelaria, cafés com música, espaços de lazer e qualquer local onde seja necessário um altifalante de elevada qualidade e saída elevada para interior/exterior, destinado a música ambiente/primeiro plano e/ou difusão de avisos.

Características

8” woofer with woven fiberglass cone
1” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
120 Watt power handling (240 Watt program)
High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

Descarregamentos

Specifications

	Versão	Tamanho	Carregado
Control 28-1L Spec Sheet versão B, atualizado: mar 2020	B	500 KB	mar 2020

Manuals

	Tamanho	Carregado
MTC-23UB-1, 25UB-1, 28UB-1 U Bracket Install Guide atualizado: out 2019	70 KB	out 2019

Brochures

	Versão	Idioma	Tamanho	Carregado
Loudspeakers for Sports Facilities atualizado: jul 2024			6 MB	jul 2024
Control Contractor Brochure (2024) versão D, atualizado: fev 2024	D		10 MB	fev 2024
Control Contractor Brochure (2025) versão A, atualizado: mar 2026	A		20 MB	mar 2026
Control Contractor Brochure (2026) atualizado: mar 2026			20 MB	mar 2026

CAD Drawings

	Tamanho	Carregado
Control 23-1, 25-1, 28-1 Bracket 2D & 3D CAD, PDF atualizado: out 2020	6 MB	out 2020
Control 28-1/L 2D Drawing atualizado: out 2020	500 KB	out 2020
Control 28-1/L 3D Drawing atualizado: out 2020	3 MB	out 2020

BIM Objects

	Tamanho	Carregado
Control 28-1 BIM Object atualizado: ago 2019		ago 2019

Compliances

	Tamanho	Carregado
JBL Control Series Passive Speakers DoC atualizado: dez 2019	200 KB	dez 2019
Control Contractor 20-1(L) Declaration of Conformity atualizado: out 2019	80 KB	out 2019
Control Contractor Series Declaration of Conformity atualizado: out 2019	100 KB	out 2019

Software

	Versão	Tamanho	Carregado
Distributed System Design (DSD) versão 3.9, atualizado: nov 2025	3.9	600 KB	nov 2025

Simulation Data

	Versão	Tamanho	Carregado
JBL Pro ALL CLF Files versão 12-10-21, atualizado: mai 2023	12-10-21	20 MB	mai 2023

Images

	Tamanho	Carregado
Control 28-1 Front White atualizado: out 2020	300 KB	out 2020
Control 28-1 Detail atualizado: out 2020	800 KB	out 2020
Control 28-1 Angle atualizado: out 2020	300 KB	out 2020

Accessories

	Tamanho	Carregado
WeatherMax Grille Photos atualizado: abr 2021	3 MB	abr 2021
U-Bracket Install guide atualizado: out 2020	70 KB	out 2020

Install Guides

	Tamanho	Carregado
Painting HIPS Loudspeaker Cabinets atualizado: jun 2023	400 KB	jun 2023
Guide to Business Music atualizado: out 2020	50 KB	out 2020
Invisiball™ Installation Instructions atualizado: set 2019	200 KB	set 2019
Attaching Control Contractor Speakers to Stands atualizado: nov 2019	80 KB	nov 2019

Speaker Tunings

	Versão	Tamanho	Carregado
Commercial, CBT, and AWC Tunings 220616 versão A, atualizado: mai 2023	A	600 KB	mai 2023

Se algum dos links acima resultar em caracteres estranhos no seu navegador, clique com o botão direito no ficheiro para o guardar no seu computador.

Peças e serviço

Especificações

Frequency Range (-10dB)	45 Hz to 20 kHz
Frequency Response (±3 dB)	62Hz - 16 kHz
Power Rating	240 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuous Pink Noise Rating and is conservative expression of the system’s ability to handle normal speech and music program material.
Maximum Input Voltage	27.5 V RMS (2 hrs), 55.0 V peak
Maximum SPL (1m)	112 dB ave. Continuous Pink Noise (118 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
Sensitivity	91 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
Coverage Angle	100°H x 100°V
Directivity Factor (Q)	7.3 (averaged 1kHz – 16kHz)
Impedance	8 ohms
Crossover Type	2nd order low-pass, 1st order high-pass, plus conjugate shaping
Recommended Protective High-Pass	45 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
Drivers	LF: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure	High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille	Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Mounting Hardware	InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor Capability	IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input Connectors	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Safety Agency	ROHS-compliant
Colors	Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)	386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
Net Weight (each)	6.2 kg (13.5 lbs)
Shipping Weight	13.4 kg (29.5 lbs) pair-packed (for 2 speakers)
Included Accessories	InvisiBall™ wall-mounting system, 6 mm x 180 mm hex key
Optional Accessories	MTC-28UB-1 – Yolk-type U-bracket (&-WH)

HARMAN Pro Insights

JBL Control Contractor Loudspeakers: Around the World in Eight Epic Installs

Commercial audio designers and consultants have many choices when selecting the right manufacturer, product and solution to fulfill the unique requirements of each client’s particular installed audio application. The JBL Control Contactor Series was developed specifically to target these users with purpose-built ceiling, pendant, in-wall,

CONTINUE READING