双15英寸低频扬声器配差分驱动®
VLA-C125S采用JBL久经验证的技术组件,配备双15英寸差分驱动®换能器。
箱体采用多层强化玻璃纤维和钢质端板。格栅采用锌镀、粉末涂层14规格穿孔钢材,配有声学透明黑色格栅布衬垫、疏水网层和防水导轨系统。
吊挂系统为系统设计的固有部分。组合时选择箱体间夹角。其他配件包括吊挂框架、拉杆和心形指向套件。
VLA-C125S采用JBL久经验证的技术组件,配备双15英寸差分驱动®换能器。
箱体采用多层强化玻璃纤维和钢质端板。格栅采用锌镀、粉末涂层14规格穿孔钢材,配有声学透明黑色格栅布衬垫、疏水网层和防水导轨系统。
吊挂系统为系统设计的固有部分。组合时选择箱体间夹角。其他配件包括吊挂框架、拉杆和心形指向套件。
| 大小 | |
|
|
1.2 MB |
| 大小 | |
|
|
6.5 MB |
| 大小 | |
|
|
5.7 MB |
| 大小 | |
|
|
3.9 MB |
|
|
5.5 MB |
|
|
797.0 KB |
| 大小 | |
|
|
3.3 MB |
|
|
5.5 MB |
| 大小 | |
|
|
9.0 MB |
| 大小 | |
|
|
157.1 KB |
|
|
1.5 MB |
|
|
2.8 MB |
| 大小 | |
|
|
637.4 KB |
|
|
746.6 KB |
如果上述任何链接在您的浏览器中显示为奇怪的字符,请右键点击文件以将其保存到您的计算机。
| 频率范围 (-10dB) | 52 Hz – 210 Hz |
| Frequency Response (±3 dB) | 62 Hz – 123 Hz |
| 系统额定功率 | 1600 W Continuous Pink Noise (6400 W peak), 2 hrs800 W Continuous Pink Noise (3200W peak), 100 hrs |
| Maximum Input Voltage | 80 V Rms (2 hrs), 160 V peak |
| Maximum SPL (1m) | 127 dB Cont. Ave (2 hrs), 133 dB Peak |
灵敏度 |
98 dB (52 Hz – 210 Hz, 2.83V) |
| 阻抗 | 4Ω, 3.0Ω min @ 195 Hz |
| Amplifiers | Crown DCi Family with DSP on-board |
| Recommended | Crown DCi 2 | 2400N Crown DCi 4 | 2400N |
| 低频驱动单元 | 2 x 2275H, 304 mm (15 in) diameter , each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™ |
| 音箱材料 | Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing. |
| 网罩 | Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen. |
| Inter-Enclosure Angles | VLA-C125S to VLA-C125S: 0° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S) |
| 环境 | IP-55 rating per IEC529 (dust protected and protected against jets of water). |
| Terminals | CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers. Full set of terminals on back panel, plus optional-use inter-cabinet connection terminals located on top and bottom panels of cabinet. |
| Colors | -GR: Gray (similar to Pantone 420C), -BK: Black |
| 尺寸(高 x 宽 x 厚) | 508 x 848 x 634 mm (20.0 x 33.4 x 24.9 in) |
| Net Weight (each) | 56.7 kg (125 lbs) |
| Shipping Weight (ea) | 62.6 kg (138 lbs) |
随附配件 |
2 x VLA-C125S Bracket Plates 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hex-drive) for attaching Bracket Plates 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts. |
| Optional Accessories | VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit VLA-C125S-ACC Kit – For wiring of 3 VLA-C-125S subwoofers in cardioid configuration (2 front-facing and 1 rear-facing). Allows for neat, unexposed inter-cabinet wiring via the tops and bottoms of cabinets. |
Stadiums and arenas are about much more than just delivering engaging matchups, a significant amount of time is spent designing and delivering impeccable customer experiences throughout the venue. From the time guests arrive until the moment they leave, venues need a dynamic and intelligible system
CONTINUE READING
English Premier League football side Tottenham Hotspur wanted an exceptional audio experience to complement their newly constructed 62,000 capacity stadium that opened in April 2019. The state-of-the-art sports and entertainment venue features a wide range of luxury amenities, including an innovative retractable pitch, cutting-edge video
CONTINUE READING