LS 型号的部件已密封（图示为非 LS 型号）。
AW526-LS 是一款高功率、轻量级的 2 路全频扬声器系统，由 JBL 差动驱动双音圈双磁隙 2265H 380 mm（15 英寸）低频单元，以及 2432H 高频压缩驱动单元（38 mm（1.5 英寸）出口、75 mm（3 英寸）音圈）组成。大尺寸渐进式过渡波导提供出色的 120° × 60° 覆盖范围。波导可旋转，使扬声器系统可竖直或水平安装使用。该扬声器符合适用于生命安全应用的 EN 54-24 标准。系统配备 500 W 70/100V 变压器。
| 大小 | |
|
|
1.4 MB |
| 大小 | |
|
|
5.7 MB |
| 大小 | |
|
|
938.6 KB |
|
|
284.5 KB |
| 大小 | |
|
|
24.0 MB |
|
|
21.0 MB |
| 大小 | |
|
|
141.2 KB |
| 大小 | |
|
|
2.5 MB |
|
|
867.4 KB |
| 大小 | |
|
|
525.4 KB |
| 大小 | |
|
|
58.1 KB |
| 大小 | |
|
|
557.0 KB |
| 大小 | |
|
|
1.5 MB |
如果上述任何链接在您的浏览器中显示为奇怪的字符，请右键点击文件以将其保存到您的计算机。
| 频率范围 (-10dB) | 39 Hz – 20 kHz | |||||||||||||||
| 频率响应(±3 dB) | 86 Hz – 17 kHz | |||||||||||||||
| 覆盖范围 | 120° x 60°, rotatable waveguide | |||||||||||||||
| 覆盖角度 |
|
|||||||||||||||
| Directivity Factor (Q) | 7.9 | |||||||||||||||
| Directivity Index (DI) | 9 dB | |||||||||||||||
| 分频点 | 1.1 kHz | |||||||||||||||
| 系统额定功率 | 400 W (1600 W peak), 100 hrs | |||||||||||||||
| Maximum SPL (1m) | 127 dB-SPL cont avg (133 dB peak) | |||||||||||||||
| Maximum SPL (@ 4m) | 108 dB per EN54 Standard | |||||||||||||||
| System Sensitivity (1w @ 1m) | 100 dB | |||||||||||||||
| Sensitivity (1W @ 4m) | 86.98 dB SPL | |||||||||||||||
| 变压器抽头 | 70V: 400 W, 200 W, 100W100V: 400W, 200W | |||||||||||||||
| 低频驱动单元 | 1 x JBL 2265H 380 mm (15 in.) Differential Drive® driver with 75 mm (3 in) dual voice coil | |||||||||||||||
| 标称阻抗 | 8 ohms (6.2 ohms per EN54) | |||||||||||||||
| Sensitivity (1W @ 1m, within operational band) | 98 dB SPL | |||||||||||||||
| HF 驱动程序 | JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil | |||||||||||||||
灵敏度 |
113 dB SPL | |||||||||||||||
| Waveguide | PT-H126HF -1 | |||||||||||||||
| Enclosure | Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available in black (-BK) | |||||||||||||||
| Suspension Attachment | 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety. | |||||||||||||||
| 网罩 | Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh. | |||||||||||||||
| Input Connector | CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. | |||||||||||||||
| 环境 | IP55C per IEC 529 | |||||||||||||||
| Dimensions (H x W x D in horizontal cabinet orientation) | 485 x 810 x 478 mm(19.1 x 31.9 x 18.8 in) | |||||||||||||||
| Net Weight (each) | 28.3 kg (62.5 lb) |
更新: 7月 2024
顾问支持