AM7200 扬声器系统是一款高功率中高频产品，由一个 200 毫米（8 英寸）CMCD 锥形中音压缩驱动器和一个 38 毫米（1.5 英寸）出口/75 毫米（3 英寸）音圈高频压缩驱动器组成。多频段 PT 渐进式过渡中高频波导提供可控覆盖，可旋转以适应柜体水平或竖直方向放置。高斜率分频器可最小化频段重叠，可控的轴外响应增强了系统的阵列兼容性。柜体配备 M10 螺纹悬挂点。预设计阵列支架可选。AM7200 属于 JBL AE（应用工程）系列，是一个适用于多种固定安装应用的通用扬声器系列。
| 大小 | |
AE Brochure
更新: 4月 2026
|
4.0 MB |
|
AM7200_64 Spec Sheet
更新: 4月 2026
|
739.7 KB |
|
AM7200_95 Spec Sheet
更新: 4月 2026
|
723.7 KB |
| 大小 | |
|
|
396.0 KB |
|
|
458.9 KB |
| 大小 | |
|
|
86.1 KB |
|
|
8.2 KB |
|
|
1.1 MB |
|
|
114.8 KB |
| 大小 | |
|
|
5.7 MB |
|
|
4.0 MB |
| 大小 | |
|
|
2.7 MB |
|
|
3.8 MB |
| 大小 | |
|
|
146.0 KB |
| 大小 | |
|
|
24.0 MB |
|
|
21.0 MB |
如果上述任何链接在您的浏览器中显示为奇怪的字符，请右键点击文件以将其保存到您的计算机。
| 频率范围 (-10dB) | 260 Hz – 20 kHz |
| 频率响应(±3 dB) | 330 Hz – 18 kHz |
| 覆盖范围 | /64: 60° x 40°, rotatable waveguide/95: 90° x 50°, rotatable waveguide |
| Crossover Modes | Bi-amp/Passive switchable |
| 分频点 | 2.3 kHz |
| Transducer Power Rating (AES) | MF: 350 W (1400 W peak), 2 hrsHF: 100 W (400 W peak), 2 hrs |
| 系统额定功率 | MF/HF: 200 W (800 W peak), 100 hrs |
| Maximum SPL (1m) | Bi-amp mode: MF: 133 dB-SPL cont avg (139 dB peak) HF: 135 dB-SPL cont avg (141 dB peak) Passive mode: MF/HF: 133 dB-SPL cont avg (139 dB peak) |
| System Sensitivity (1w @ 1m) | Passive mode: 108 dB SPL |
| 标称阻抗 | 8 ohms |
| Midrange Driver | JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver |
| Sensitivity (1W @ 1m) (Midrange) | 108 dB SPL |
| HF 驱动程序 | JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil |
| Sensitivity (1W @ 1m)(High Frequency) | 115 dB SPL |
| Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
| Suspension Attachment | 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware |
| 外观颜色 | Black DuraFlex™ finish. White available upon request. |
| 网罩 | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
| Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
| 环境 | Mil-Std 810; IP-x3 per IEC529. |
| Dimensions (H x W x D in vertical orientation) | 548 x 561 x 657 mm (21.6 x 22.1 x 25.9 in) |
| 净重量 | 27.2 kg (60 lb) |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide. |
顾问支持