The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive® dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.
To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.)
| Storlek | |
|
|
369 KB |
| Storlek | |
|
|
86,1 KB |
|
|
8,25 KB |
| Storlek | |
|
|
4,05 MB |
|
|
1,54 MB |
| Storlek | |
|
|
730 KB |
|
|
2,69 MB |
|
|
3,8 MB |
| Storlek | |
|
|
93,5 KB |
| Storlek | |
|
|
471 KB |
| Storlek | |
|
|
570 KB |
Om någon av länkarna ovan resulterar i konstiga tecken i din webbläsare, högerklicka på filen för att spara den på din dator.
| Frequency Range (-10dB) | 32 Hz - 1 kHz |
| Frequency Response (±3 dB) | 38 Hz - 1 kHz |
| Transducer Power Rating (AES) | 1600 W (6400 W peak), 2 hrs |
| Input Modes | Drivers Parallel / Drivers Discrete |
| System Power Rating | 1350 W (5400 W peak), 100 hrs. |
| Maximum SPL (1m) | 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak) |
| System Sensitivity | 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m |
| Nominal Impedance | 4 ohms in parallel-drive mode2 x 8 ohms in discrete-drive mode |
| LF Driver | 2 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® drivers |
| Enclosure | Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment | 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware |
| Finish | Black DuraFlex™ finish.White available upon request. |
| Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
| Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
| Environmental | Mil-Std 810; IP-x3 per IEC529. |
| Dimensions (H x W x D in vertical orientation) | 965 x 419 x 597 mm(38.0 x 16.5 x 23.5 in) |
| Net Weight (each) | 36.7 kg (81.0 lb) |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers |
| Nominal LF Driver Impedance | 4 ohms in parallel-drive mode 2 x 8 ohms in discrete-drive mode |
version A,
uppdaterad: maj 2023
Konsultsupport