When connected to a CBT1000 line array column speaker, the CBT1000E Extension provides extended bass response, extended pattern control, and increased sound output levels. The combined array system provides Constant Beamwidth Technology™, which represents a breakthrough in pattern control consistency, utilizing complex analog beamforming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of passive column speakers.
រូបភាពធំជាង
លក្ខណៈពិសេស
- Components: Six (6) 165 mm (6.5 in) high-excursion LF drivers (CBT1000E)
- 1500 Watt power handling (CBT1000E)
- Built-in purpose-designed crossover network, for combining with CBT1000 (CBT1000E)
- Coupler plate included (CBT1000E)
- Extended pattern control
- Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT1000+1000E)
- 3000 watt power handling (CBT1000+1000E)
- Patent-pending Constant Beamwidth Technology ™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing (CBT1000)
- Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room (CBT1000)
- Single-speaker system room coverage at high SPL, with little over-splash and strong bass response down to below 38 Hz (CBT1000+1000E)
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode (CBT1000)
- Swivel (pan)/tilt wall bracket and coupler plate included.
ការទាញយក
Specifications
| ទំហំ | |
|
|
3 MB |
|
|
2.22 MB |
Brochures
| ទំហំ | |
|
|
5.71 MB |
CAD Drawings
| ទំហំ | |
|
|
763 KB |
|
|
200 KB |
|
|
18 MB |
BIM Objects
| ទំហំ | |
|
|
|
|
|
Compliances
| ទំហំ | |
|
|
148 KB |
|
|
75.6 KB |
Software
| ទំហំ | |
|
|
3.66 MB |
Simulation Data
| ទំហំ | |
|
|
24 MB |
Application Guides
| ទំហំ | |
Constant Beamwidth Technology – CBT Series Passive Controlled-Coverage Columns
បានធ្វើបច្ចុប្បន្នភាព: តុលា 2022
|
8.48 MB |
Information documents
| ទំហំ | |
|
|
17.2 KB |
Images
| ទំហំ | |
|
|
237 KB |
FAQs
| ទំហំ | |
|
|
295 KB |
|
|
295 KB |
Install Guides
| ទំហំ | |
|
|
440 KB |
|
|
1.84 MB |
Quick Start Guides
| ទំហំ | |
|
|
401 KB |
Ease Data
| ទំហំ | |
|
|
5.76 MB |
Accessories
| ទំហំ | |
|
|
305 KB |
Speaker Tunings
| ទំហំ | |
|
|
134 KB |
|
|
557 KB |
ប្រសិនបើតំណភ្ជាប់ខាងលើបង្ហាញអក្សរចម្លែកក្នុងកម្មវិធីរុករករបស់អ្នក សូមចុចខាងស្តាំលើឯកសារដើម្បីរក្សាទុកទៅកុំព្យូទ័ររបស់អ្នក។
ផ្នែក និងសេវាកម្ម
លក្ខណៈពិសេស
| Drivers | Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT1000+1000E) |
| Frequency Range (-10dB) | 38 Hz - 20 kHz |
| Coverage | Vertical (selectable via switch) |
| Sensitivity | 102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space)95 dB (at lowest sensitivity setting: “Medium” pattern up, “Downfill” pattern down, “Music” voicing in free space) |
| Impedance | 4 ohms |
| Power Capacity | 1500W (6000W peak), 2 hrs 900W (3600W peak), 100 hrs |
| Maximum SPL (1m) | Highest directivity setting: (“Point” pattern up, “Point” pattern down) with “Speech” voicing: 131 dB continuous average pink noise 134 dB continuous program 137 dB Peak Highest directivity setting: (“Point” pattern up, “Point” pattern down) with “Music” voicing: 127 dB continuous average pink noise 130 dB continuous program 133 dB peak Lowest directivity setting: (“Medium” pattern up, “Downfill” pattern down) with “Speech” voicing: 128 dB continuous average pink noise 131 dB continuous program 134 dB peak Lowest directivity setting: (“Medium” pattern up, “Downfill” pattern down) with “Music” voicing: 124 |
| Coverage Angle | Vertical: Separate four top and four bottom selections, Horizontal: tapered 100° to 160° |
| Low Frequency Drivers | 12 pcs, 165 mm (6.5 in) drivers, neodymium, 50 mm (2 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance. |
| High Frequency Drivers | 24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance. |
| Enclosure | Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille |
| Outdoor Capability | IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. Exceeds Mil Spec 810 for humidity, temperature & UV, ASTM G85 for acid-air/salt-spray (200 hrs). |
| Color | Black (RAL9004) or White (-WH) (RAL9016) |
| Insert Points | Coupler plate utilizes the bottom two rows of the top speaker and the top two rows of the bottom speaker, leaving available: 20 individual M8 inserts on back panel (20 mm deep) for use with swivel (pan)/tilt bracket(s), plus 4 individual M8 inserts on top and 4 on bottom of cabinet end-caps. |
| Mounting | Included two-part swivel (pan)/tilt wall bracket provides continuously variable +/- 45 degree left-right swivel aiming (at no up/down tilt – see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously variable +/- 5.25 degree tilt, in the following increments: 5.25°, 5.0°, 4.5°, 4°, 3.75°, 3.5°, 3.0°, 2.75°, 2.5°, 2.0°, 1.75°, and 1.25°. Twenty (20) available threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for legacy OmniMount® and other compatible third–party brackets. Four (4) threaded mount points on the top end-cap and four (4) on the bottom end-cap. Threaded mounting points can be utilized for suspension. (Always use multiple mounting points.) |
| Dimensions (H x W x D) | 2040 mm x 250 mm x 345 mm (80.4 x 9.9 x 13.6 in) |
| Net Weight | (cabinet): 47.2 kg (104 lbs) |
| Included Accessories | Two-piece swivel (pan)/tilt wall bracket Coupler Plate |
| Optional Accessories | MTC-PC2 terminal panel cover CBT1K-ACC1 Accessory kit includes: MTC-CBT-SUS3 CBT Series suspension bracket kit (2 pcs included to provide top and bottom attachment points) |
HARMAN Pro Insights
Igniting a Commercial Audio Revolution: Inside JBL Control Contractor Loudspeakers
Founded in 1946 to develop state-of-the-art cinema loudspeakers, JBL realized early on, the growing and diverse requirements of commercial audio applications. The Control Contractor™ loudspeaker family was born to address the unique, challenging, and evolving needs of stadiums and arenas, theme parks, transportation, retail, restaurants,
CONTINUE READING
ការគាំទ្រអ្នកប្រឹក្សា