JBL Professional PD5125

Immagini più grandi

Mid/High / Low Frequency

The PD5125 is a high power low frequency loudspeaker comprised of two 380 mm (15 in) VGC™ Vented Gap Cooled low frequency drivers in a front-loaded, vented configuration. The trapezoidal cabinet is fitted with M10 threaded suspension points.

Caratteristiche

Two high power 380 mm (15 in) low frequency drivers mounted in individual vented chambers 691 (27.2).
Low frequency extension to 40 Hz.
Enclosure dimensions compatible with all PD5000 and PD700 models 20°.

To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.

Download

Specifications

	Dimensione	Caricato
PD5125 Spec Sheet aggiornato: ott 2020	365 KB	ott 2020

Manuals

	Versione	Lingua	Dimensione	Caricato
Weather Resistant Configurations versione A, aggiornato: mag 2023	A		86,1 KB	mag 2023
PD5000 Product Range aggiornato: ott 2019			290 KB	ott 2019
PD Array Guide aggiornato: ott 2019			2,12 MB	ott 2019

Brochures

	Lingua	Dimensione	Caricato
PD6000 Series - Brochure aggiornato: mar 2025		17,1 MB	mar 2025
Loudspeakers for Sports Facilities aggiornato: lug 2024		5,71 MB	lug 2024

CAD Drawings

	Dimensione	Caricato
PD5000 2D CAD aggiornato: ott 2020	4,94 MB	ott 2020
PD5000 2D PDF aggiornato: ott 2020	662 KB	ott 2020
PD5000 3D CAD aggiornato: ott 2020	170 KB	ott 2020

Compliances

	Dimensione	Caricato
PD5125 Declaration of Conformity aggiornato: ott 2020	257 KB	ott 2020
PD5000 Series Declaration of Conformity aggiornato: ott 2019	91,7 KB	ott 2019

Preset Libraries

	Dimensione	Caricato
PD6000 Series - Preset Library aggiornato: mar 2025	12,2 MB	mar 2025

Speaker Tunings

	Dimensione	Caricato
PD5000 Tunings aggiornato: mag 2023	2,35 MB	mag 2023

Se uno dei link sopra produce caratteri strani nel tuo browser, fai clic destro sul file per salvarlo sul tuo computer.

Parti e assistenza

Specifiche

Frequency Range (-10dB)	37 Hz to 2.5 kHz
Frequency Response (±3 dB)	42 Hz to 2.1 kHz
Transducer Power Rating (AES)	2000 W (8000 W peak) 2 hrs
System Power Rating	1200 W (4800 W peak), 100 hrs
Maximum SPL (1m)	50 Hz - 125 Hz 136 dB-SPL cont ave (142 peak) 125 Hz - 800 Hz 135 dB-SPL cont avg (141 peak) supported, high power low frequency module
Input Modes	Drivers Parallel / Drivers Discrete
Nominal Impedance	4 ohms in parallel-drive mode 2 x 8 ohms in discrete drive mode
LF Driver	2 x JBL 2226H 380 mm (15 in) VGC drivers with 100 mm (4 in) voice coil Low frequency transducers are the 2226H
Enclosure	Trapezoidal with 15 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment	20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories)
Finish	Black DuraFlex™ finish. White (-WH) available upon request
Optional Weather Resistant Versions	WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature
Grille	Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)
Input Connectors	Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through
Environmental	Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX
Dimensions (H x W x D in vertical orientation)	991 x 476 x 609 mm (39 x 18.75 x 27.2 in)
Net Weight	53.4 kg (118 lb)
Optional Accessories	229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts
Nominal LF Driver Impedance	4 ohms in parallel-drive mode 2 x 8 ohms in discrete drive mode