Mid/High / Low Frequency


Mid/High / Low Frequency

The PD5125 is a high power low frequency loudspeaker comprised of two 380 mm (15 in) VGC™ Vented Gap Cooled low frequency drivers in a front-loaded, vented configuration. The trapezoidal cabinet is fitted with M10 threaded suspension points.


  • Two high power 380 mm (15 in) low frequency drivers mounted in individual vented chambers 691 (27.2).
  • Low frequency extension to 40 Hz.
  • Enclosure dimensions compatible with all PD5000 and PD700 models 20°.


  Version Language Size Uploaded
Data Sheets
WRC & WRX Configurations
updated: 10月30日
    392.9 KB 10月30日
PD5125 Spec Sheet
updated: 4月29日
    365.4 KB 4月29日
PD5000 Product Range
updated: 10月18日
    290.4 KB 10月18日
PD Array Guide
updated: 10月18日
    2.1 MB 10月18日
PD6000 Brochure
updated: 10月18日
    17.1 MB 10月18日
Installed Sound Full Line 2015 Catalog
updated: 10月22日
    2.6 MB 10月22日
Full Line 2015 Catalog
updated: 1月11日
    11.7 MB 1月11日
CAD Drawings
PD6000 3D DXF Drawings
updated: 10月31日
    124.7 KB 10月31日
PD5000 2D CAD
updated: 4月29日
    4.9 MB 4月29日
PD5000 2D PDF
updated: 4月29日
    662.1 KB 4月29日
PD5000 3D CAD
updated: 4月29日
    170.0 KB 4月29日
PD5125 Declaration of Conformity
updated: 10月31日
    257.4 KB 10月31日
PD5000 Series Declaration of Conformity
updated: 10月18日
    91.7 KB 10月18日
Speaker Tunings
PD6000 Series Tunings
updated: 10月31日
    12.2 MB 10月31日
PD5000 Tunings
updated: 10月18日
    2.3 MB 10月18日

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.


Frequency Response (-10dB) 37 Hz to 2.5 kHz
Frequency Response (±3 dB) 42 Hz to 2.1 kHz
Transducer Power Rating (AES) 2000 W (8000 W peak) 2 hrs
系统额定功率 1200 W (4800 W peak), 100 hrs
Maximum SPL (1m) 50 Hz - 125 Hz 136 dB-SPL cont ave (142 peak) 125 Hz - 800 Hz 135 dB-SPL cont avg (141 peak) supported, high power low frequency module
Input Modes Drivers Parallel / Drivers Discrete
标称阻抗 4 ohms in parallel-drive mode 2 x 8 ohms in discrete drive mode
低频驱动单元 2 x JBL 2226H 380 mm (15 in) VGC drivers with 100 mm (4 in) voice coil Low frequency transducers are the 2226H
Enclosure Trapezoidal with 15 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories)
外观颜色 Black DuraFlex™ finish. White (-WH) available upon request
Optional Weather Resistant Versions WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature
网罩 Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)
输入连接器 Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through
环境 Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX
Dimensions (H x W x D in vertical orientation) 991 x 476 x 609 mm (39 x 18.75 x 27.2 in)
净重量 53.4 kg (118 lb)
Optional Accessories 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts
Nominal LF Driver Impedance 4 ohms in parallel-drive mode
2 x 8 ohms in discrete drive mode