Seri CDi DriveCore adalah evolusi dalam amplifikasi, menyediakan perpaduan kesan dari performa tinggi; set fitur kaya, dan biaya kompetitif. Menggunakan teknologi yang berasal dari amplifier Installed Sound unggulan kami (seri Crown DriveCore Install), CDi DriveCore 2|600 menawarkan fungsionalitas yang streamlined untuk bekerja di hampir semua instalasi ukuran menengah seperti sinema, rumah ibadah, bar, lounge, dan lainnya. Dirancang untuk kemudahan penggunaan dalam berbagai aplikasi, 2|600 adalah amplifier 2-channel yang mencakup kontrol/monitoring jaringan, DSP level tinggi, antarmuka front-panel, dan dukungan untuk menggerakkan beban speaker hingga 100Vrms tanpa memerlukan transformer. Seluruh lini CDi DriveCore dilengkapi sebelumnya dengan tuning speaker JBL untuk membantu membuat instalasi lebih cepat dan lebih mudah.

Perbandingan Fitur

Model CDi DriveCore	Channel	Kontrol Jaringan	DSP	Port Kontrol	BLU link
2\|300	2
2\|300BL	2
4\|300	4
4\|300BL	4
2\|600	2
2\|600BL	2
4\|600	4
4\|600BL	4
2\|1200	2
2\|1200BL	2
4\|1200	4
4\|1200BL	4

Daya Output: Mode Dual - Semua Channel Aktif

Model CDi DriveCore

Channel

2Ω

4Ω

8Ω

16Ω

70Vrms

100Vrms

2|300 / 2|300BL

Fitur

DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.

DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration

Input Router
Input Delay – Up to 1000ms
Input Parametric EQ – 8 band
Crossover
Output Parametric EQ – 8 band
Output Delay – Up to 100ms
LevelMAX™ Limiter

BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link

Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.

Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.

GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Unduhan

Dokumen

	Bahasa	Ukuran	Diunggah
CDi 2\|600 Lembar Data diperbarui: Apr 2026		2,63 MB	Apr 2026
Power Draw & Thermal sheet diperbarui: Apr 2026		263 KB	Apr 2026
White Paper - The Benefit of Using Speaker Tunings for Commercial Loudspeakers diperbarui: Apr 2026		1,24 MB	Apr 2026

Brochures

	Bahasa	Ukuran	Diunggah
Pro Install Overview Brochure diperbarui: Okt 2023		23,1 MB	Okt 2023

Owner's Manuals

	Bahasa	Ukuran	Diunggah
CDi DriveCore Owner's Manual-English diperbarui: Nov 2021		9,18 MB	Nov 2021
Owner's Manual-Chinese diperbarui: Sep 2017		12,7 MB	Sep 2017

Comparison Charts

	Ukuran	Diunggah
CDi DriveCore product comparison chart diperbarui: Okt 2020	229 KB	Okt 2020

Jika ada tautan di atas yang menampilkan karakter aneh di browser Anda, klik kanan file tersebut untuk menyimpannya ke komputer Anda.

Spesifikasi

BLU link	No
Channels	2
Sensitivity (for full rated power at 8 ohms)	0.7V RMS
Rated Power Output (per channel @ 4 ohms)	600W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms)	> 104dB
THD (full rated power, 20 Hz - 20 kHz)	0.35%
Damping Factor (20 Hz to 100 Hz)	> 1000
Frequency Response (8Ω, 20 Hz - 20 kHz)	+/-0.5dB
Crosstalk (below rated power) 20 Hz to 1 kHz	> 80dB
Input Impedance (nominally balanced, nominally unbalanced)	20 kΩ balanced, 10 kΩ unblanced
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion)	19 x 3.5 x 12.25
Weight	14.56 lbs (6.6 kg)
Power Supply Connector	"Standard IEC type 320 inlet for detachable connector 100 – 240V~"