With 12 inputs and 6 outputs and Ethernet control the dbx ZonePRO® 1261 is the newest members of the ZonePRO® family providing a complete suite of signal processing and control for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 1261/1261 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 1261 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.
Beyond processing, the ZonePRO® products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters. The addition of Ethernet control means that not only will it work with standard network equipment, but it can also be accessed from remote dialup locations or from wireless access points.
The ZonePRO® 1261 will take your Commercial Audio system to the next level with advanced processing, versatility and control.
Caractéristiques
- Advanced Feedback Suppression (AFS™)
- Autowarmth®
- Auto Gain Control
- Compression
- Limiting
- Noise Gating
- Notch Filtering
- Bandpass and Crossover Filters
- Parametric EQ
- Security Lockout
- Wall Panel Control
- RS-232 Control
- IEC, UL and CSA Approvals
Téléchargements
Size | ||||
1261 Guide d’applications-English
updated: mars 2024
|
2,11 Mo | |||
1261 Brochure-English
updated: mars 2024
|
733 ko | |||
1261 Dessin CAD avant
updated: mars 2024
|
41,1 ko | |||
1261 Dessin CAD arrière
updated: mars 2024
|
115 ko | |||
1261 Gabarit de découpe-English
updated: mars 2024
|
1,36 Mo | |||
1261 Guide d’installation-Spanish
updated: mars 2024
|
487 ko | |||
Software | ||||
AMX dbx ZonePRO Controllers
version 2.1,
updated: août 2016
|
563 ko | |||
Crestron dbx ZonePRO controller
version 3.0,
updated: août 2016
|
4,99 Mo | |||
ZonePRO String Calculator
version 1.3,
updated: août 2016
|
184 ko | |||
ZonePRO GUI Designer
version 3.2,
updated: mai 2022
|
15,1 Mo | |||
Tech Notes | ||||
ZC Connectivity and Association
updated: oct. 2020
|
274 ko | |||
Training Resources | ||||
ZonePRO Training (All)
updated: oct. 2020
|
367 Mo | |||
Install Guides | ||||
Install Guide-English
updated: oct. 2020
|
11 Mo | |||
3rd Party Resources | ||||
ZonePro Protocol Guide
updated: oct. 2020
|
246 ko | |||
Safety Sheets | ||||
Safety Sheet-English
updated: août 2017
|
328 ko | |||
Quick Start Guides | ||||
Quick Start Guide-English
updated: août 2017
|
860 ko |
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.
Caractéristiques techniques
Input | 12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF |
Input Connectors | Euroblock (Line and Mic) RCA (Source) |
Input Impedance | Euroblock > 50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA >25kΩ Unbalanced, RF Filtered |
Max Input | +20dBu Mic/Line, +12dBu RCA |
CMRR | > 40dB, typically >55db @ 1kHz |
Mic Preamp gain | 30 to 60dB |
Mic Preamp Equivalent Input Noise (EIN) | <-118dB |
Mic Preamp Phantom Power | 15V |
Output | 6 Analog |
Output Connectors | Euroblock |
Output Type | Electronically balanced, RF filtered |
Output Impedance | 120 ohms balanced, 60ohm unbalanced |
Max Output | +20dBu |
A/D Converter | dbx Type IV™ conversion system |
A/D Dynamic Range | (line) >113 dB, A-weighted, >110 dB unweighted |
Type IV Dynamic Range | >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW |
Sample Rate | 48kHz |
D/A Dynamic Range | 112 dB A-weighted, 109dB unweighted |
Dynamic Range | >110 dB A-weighted, >107dB unweighted |
THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
Frequency Response | 20Hz - 20kHz, +/-0.5dB |
Interchannel Crosstalk | >80dB typical |
Propagation Delay | 0.6 msec |
Operating Voltage | 100-240 VAC, 50/60Hz |
Power Consumption | 27 W |
Unit Weight | 6.8 lbs.(3.1 kg) |
Shipping Weight | 8.8 lbs. (4.0 kg) |
Dimensions | 1.75” H x 5.75” D x 19” W |
Safety Agency Certifications | UL 60065, IEC 60065, E 60065, EN 55013 |
Modules de formation
- ZonePRO Basic Programming Overview
- ZonePRO Programming an Offline Device
- ZonePRO Training Modules Overview
- ZonePRO Overview
- ZonePRO Connecting via RS232
- ZonePRO Software-Firmware Compatibility
- ZonePRO Networking Properties & Wizard
- ZonePRO Help Menu
- ZonePRO Configuring The Serial Connection
- ZonePRO Configuring The Ethernet Connection
- ZonePRO Audio Inputs & Outputs
- ZonePRO Link Inputs & Outputs
- ZonePRO Zone Controller Inputs
- ZonePRO Program Screen
- ZonePRO Configuration Wizard - Source Configuration
- ZonePRO Configuration Wizard - Zone Configuration
- ZonePRO Configuration Wizard - ZC Panel Configuration
- ZonePRO Configuration Wizard - Source ZC Association
- ZonePRO Configuration Wizard - Routing and Zone ZC Association
- ZonePRO Configuration Wizard - Front Panel Configuration
- ZonePRO Paging and Priority Overrides Explained
- ZonePRO DSP - Input Processing
- ZonePRO DSP - Parametric EQ
- ZonePRO DSP - Automatic Gain Control
- ZonePRO DSP - Notch Filter
- ZonePRO DSP - Compressor
- ZonePRO DSP - Noise Gate
- ZonePRO DSP - De-esser
- ZonePRO DSP - Advanced Feedback Supression
- ZonePRO DSP - Mid Router
- ZonePRO DSP - Mid Mixer
- ZonePRO DSP - Auto Warmth
- ZonePRO DSP - Band Pass Filter
- ZonePRO DSP - Limiter
- ZonePRO DSP - Ambient Noise Compensation
- ZonePRO DSP - Delay
- ZonePRO DSP - Output Polarity
- ZonePRO DSP - Storing/Recalling Scenes
- ZonePRO Programming - Scene Wizard
- ZonePRO Programming - Schedule Wizard
- ZonePRO Programming - Saving/Opening Files
News
Assistance/FAQ
1261 FAQ
What serial adapters work with the 1261 ZonePRO?
Please refer to the following: RS-232Adaptors.pdf
How do I perform a hard reset on the 1261 ZonePRO?
Remove the lid (2 screws on each side of lid and top center screw on face).
The below led refers to the led which is located on the mainboard, just left of center and about 2.5 inches back from the face.
- Push and release the button on the left (CPU Reset).
- Led lights green.
- Led lights red.
- When led goes off, press and hold the right side button (Flash Download).
- Led lights green.
- Led lights red.
- Led lights green/red (amber).
- Led lights green, now release flash download button.
- Wait about 30 seconds. The led should now alternate between green and red, indicating that the unit has fully booted.
Note: You can also perform a Hard or Soft reset from the Help menu located in the Program Screen in ZonePRO Designer. However, you must already be connected for this to work.
How to connect to a dbx ZonePRO Processor using ZonePRO Designer Software
ZonePRO You Tube Video Link:
Connecting to a dbx ZonePRO Processor using ZonePRO Designer Software
How to setup a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
ZonePRO You Tube Video Link:
Setting up a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
How do you set up page steering in ZonePRO Designer using dbx ZC-3 and ZC-7 controllers?
ZonePRO YouTube Video Link: