The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.
Features
- 6 Inputs / 4 Outputs
- 4 Balanced Mic/Line Inputs
- 2 Unbalanced, Mono-Summed RCA Input Pairs
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
Downloads
Size | ||||
![]() |
2.11 MB | |||
![]() |
733 KB | |||
![]() |
1.21 MB | |||
![]() |
487 KB | |||
![]() |
1.93 MB | |||
Tech Notes | ||||
updated: Oct 2020
|
274 KB | |||
Software | ||||
version 2.1,
updated: Aug 2016
|
563 KB | |||
version 3.0,
updated: Aug 2016
|
4.99 MB | |||
version 1.3,
updated: Aug 2016
|
184 KB | |||
version 3.2,
updated: May 2022
|
15.1 MB | |||
Install Guides | ||||
updated: Oct 2020
|
11 MB | |||
3rd Party Resources | ||||
updated: Oct 2020
|
246 KB | |||
Safety Sheets | ||||
updated: Aug 2017
|
328 KB | |||
Quick Start Guides | ||||
updated: Aug 2017
|
860 KB |
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.
Specifications
Indicators | Network Traffic, Power |
Input | 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs |
Input Connectors | Euroblock (Line and Mic) RCA (Source) |
Input Type | Electronically balanced/RF-filtered |
Input Impedance | Euroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered |
Max Input | +20dBu Mic/Line, +12dBu RCA |
CMRR | >40dB, typically >55dB @ 1 kHz |
Mic Preamp gain | 30 to 60dB |
Mic Preamp Equivalent Input Noise (EIN) | < -118dBu, 22Hz-22kHz, 150Ω Source Impedance |
Mic Preamp Phantom Power | +15VDC |
Output | 4 total |
Output Connectors | Euroblock |
Output Type | Electronically Balanced, RF Filtered |
Output Impedance | 120Ω Balanced, 60Ω Unbalanced |
Max Output | +20dBu |
A/D Converter | dbx Type IV™ conversion system |
A/D Dynamic Range | (line) >113 dB, A-weighted, >110 dB unweighted |
Type IV Dynamic Range | >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW |
Digital Output Dynamic Range | >114 dB A-weighted, 110dB unweighted |
Sample Rate | 48kHz |
D/A Dynamic Range | 112 dB A-weighted, 109dB unweighted, 22kHz BW |
Dynamic Range | >109 dB A-weighted, >106 dB unweighted, 22kHz BW |
THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
Frequency Response | 20Hz - 20kHz, +/-0.5dB |
Interchannel Crosstalk | >80dB typical |
Propagation Delay | 0.6 msec |
Operating Voltage | 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz |
Power Consumption | 29 W |
BTU | <92.13 |
Unit Weight | 6.05 lbs / 2.74 kg |
Shipping Weight | 8.2 lbs / 4 kg |
Dimensions | 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm) |
Safety Agency Certifications | UL 600065, IEC 60065, EN 55013, E60065 |
Training Modules
- ZonePRO Basic Programming Overview
- ZonePRO Training Modules Overview
- ZonePRO Overview
- ZonePRO Connecting via RS232
- ZonePRO Software-Firmware Compatibility
- ZonePRO Programming an Offline Device
- ZonePRO Networking Properties & Wizard
- ZonePRO Help Menu
- ZonePRO Configuring The Serial Connection
- ZonePRO Configuring The Ethernet Connection
- ZonePRO Audio Inputs & Outputs
- ZonePRO Link Inputs & Outputs
- ZonePRO Zone Controller Inputs
- ZonePRO Program Screen
- ZonePRO Configuration Wizard - Source Configuration
- ZonePRO Configuration Wizard - Zone Configuration
- ZonePRO Configuration Wizard - ZC Panel Configuration
- ZonePRO Configuration Wizard - Source ZC Association
- ZonePRO Configuration Wizard - Routing and Zone ZC Association
- ZonePRO Configuration Wizard - Front Panel Configuration
- ZonePRO Paging and Priority Overrides Explained
- ZonePRO DSP - Input Processing
- ZonePRO DSP - Parametric EQ
- ZonePRO DSP - Automatic Gain Control
- ZonePRO DSP - Notch Filter
- ZonePRO DSP - Compressor
- ZonePRO DSP - Noise Gate
- ZonePRO DSP - De-esser
- ZonePRO DSP - Advanced Feedback Supression
- ZonePRO DSP - Mid Router
- ZonePRO DSP - Mid Mixer
- ZonePRO DSP - Auto Warmth
- ZonePRO DSP - Band Pass Filter
- ZonePRO DSP - Limiter
- ZonePRO DSP - Ambient Noise Compensation
- ZonePRO DSP - Delay
- ZonePRO DSP - Output Polarity
- ZonePRO DSP - Storing/Recalling Scenes
- ZonePRO Programming - Scene Wizard
- ZonePRO Programming - Schedule Wizard
- ZonePRO Programming - Saving/Opening Files
News
Support/FAQs
641m FAQs
How to connect to a dbx ZonePRO Processor using ZonePRO Designer Software
ZonePRO You Tube Video Link:
Connecting to a dbx ZonePRO Processor using ZonePRO Designer Software
How to setup a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
ZonePRO You Tube Video Link:
Setting up a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
How do you set up page steering in ZonePRO Designer using dbx ZC-3 and ZC-7 controllers?
ZonePRO YouTube Video Link:
dbx 641m
6x4 Digital Zone Processor
$525.00