| Drivers |
Six (6) 165 mm (6.5 in) LF drivers Twenty-four (24) 25 mm (1 in) HF drivers |
| Frequency Range (-10dB) |
45 Hz – 20 kHz |
| Sensitivity |
102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space); 95 dB (at lowest sensitivity setting: “Medium” pattern up,“Downfill” pattern down, “Music” voicing in free space) |
| Impedance |
4 ohms (4 ohms above 1 kHz; 8 ohms below 800 Hz) |
| Power Capacity |
1500 W (6000 W peak), 2 hrs;
900 W (3600 W peak), 100 hrs |
| Maximum Input Voltage |
65.0 Volts RMS (2 hrs), 130.0 Volts Peak |
| Maximum SPL (1m) |
Highest directivity setting: (“Point” pattern up, “Point” pattern down) with “Speech” voicing: 131 dB continuous average pink noise, 134 dB continuous program, 137 dB Peak |
| Coverage Angle |
Vertical: Separate four top and four bottom selections, Horizontal: tapered 100° to 160°. Consult spec sheet for details |
| Recommended High-Pass |
35Hz, 24 dB/oct or greater |
| Low Frequency Drivers |
6 pcs, 165 mm (6.5 in) drivers, lightweight neodymium motors, 50 mm (2.0 in) diameter voice coils, copper-capped pole tips to minimize flux modulation and linearize inductance, 16 mm (0.63 in) long coil for high linear drive and high power handling, damped blended textile surround, coated cones for moisture, UV and salt resistance. Magnetically shielded. |
| High Frequency Drivers |
24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance. |
| Enclosure |
Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille |
| Outdoor Capability |
IP-55 rated, per IEC529, when installed with optional MTC-PC2 cover. ASTM G85 for acid-air/salt-spray (200 hrs.). |
| Color |
Black (RAL9004) or White (-WH) (RAL9016) |
| Insert Points |
14 individual M8 inserts on back panel (20 mm deep) for use with swivel (pan)/tilt bracket(s), forged-shoulder steel eyebolts, swivel rings, and after-market third-party brackets, plus 4 individual M8 inserts on top and 4 on bottom of cabinet end-caps. |
| Mounting |
Included two-part swivel (pan)/tilt wall bracket provides continuously variable +/- 45 degree left-right swivel aiming (at no up/down tilt – see Bracket Guide for maximum swivel range at various up/down tilt angles), +/- 15 degree tilt in 1 degree fixed increment points. Fourteen (14) threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for legacy OmniMount® and other compatible third-party brackets. Four (4) threaded mount points on the top end-cap and four (4) on the bottom end-cap. Threaded mounting points can be utilized for suspension. (Always use multiple mounting points.) |
| Dimensions |
(H x W x D): 1020 mm x 250 mm x 345 mm (40.2 x 9.9 x 13.6 in) |
| Net Weight |
(cabinet): 24.5 kg (54 lbs) |
| Shipping Weight |
38.6 kg (85 lbs) |
| Included Accessories |
Two-piece swivel (pan)/tilt wall bracket |
| Optional Accessories |
MTC-PC2 terminal panel cover
CBT1K-ACC1 Accessory kit includes:
- 2 pcs MTC-CBT-FM3 flush-mount brackets
- 1 pc MTC-CBT-OS3 offset bracket (for CBT 1000+1000E array – works in conjunction with CBT 1000E’s included
- Coupler Plate for locating CBT 1000E extension cabinet above CBT 1000 instead of below it)
MTC-CBT-SUS3 CBT Series suspension bracket kit (2 pcs included to provide top and bottom attachment points) |
Constant Beamwidth Technology – CBT Series Passive Controlled-Coverage Columns
تم التحديث: أكتوبر 2022
دعم الاستشاريين