JBL Professional VMA 260/2120

Hình ảnh lớn hơn

The JBL VMA Series is a cost-effective line of Mixer/Amplifiers with low impedance functionality (4Ω, 8Ω) and high impedance 70V and 100V output. They are designed with convenient and flexible features to be used by commercial integrators worldwide, ideal for emerging markets.

Tính năng

• 8 inputs with 2 outputs of 60 or 120-watts of power
• Independent bass and treble controls for each output channel
• 100V and 70V output, or 4Ω/8Ω
• Paging Chime, and Priority muting
• Works with JBL CSR-V wall controllers
• Balanced mic/line inputs; RCA (.775V) inputs
• Rack mounting hardware included

Tải xuống

Tài liệu

	Ngôn ngữ	Kích thước	Đã tải lên
VMA 260/2120 Hướng dẫn sử dụng-Tiếng Anh cập nhật: Thg 4 2026		3 MB	Thg 4 2026

Firmware

	Phiên bản	Kích thước	Đã tải lên
VMA Firmware (for S/N before 13000022868 ONLY) phiên bản 23.0322, cập nhật: Thg 8 2023	23.0322	2 MB	Thg 8 2023

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Phụ tùng & Dịch vụ

Thông số kỹ thuật

Max Output Power per Channel	into 4 Ω or 8 Ω; 1kHz, ≤ 0.5% THD - VMA260: 60W VMA2120: 120W
Insertion Loss	(70V & 100V outputs) 1dB maximum
Number of Inputs	8
Number of Outputs	2
Tone Controls	(Bass and Treble non-detented potentiometers on each channel) Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
Input Sensitivity	(to obtain full rated power into 8 Ω load) Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS
Frequency Response	(measured at 2.83VRMS into rated load impedance at any output) 4/8 Ω Output: 20Hz - 20kHz, +/-2dB; 70V/100V Outputs: 80Hz - 15kHz +/-3dB
Total Harmonic Distortion (THD)	(measured at 2.83VRMS into rated load impedance at any output) Power Amp Output: <0.5%, 20Hz - 20kHz
Signal to Noise Ratio	(Ref. Rated Power, mixer levels @ min., master volume @ max. A-weighted) >76dB
Input Impedance	(nominal) Mic: 400 Ω Line: 20 kΩ (balanced) RCA: 50 kΩ
Phantom Power	27VDC
Crosstalk	(reference rated power, volume at mid position, 1kHz) -70 dB
Nominal AC Line Voltages	100V, 120V, 220V, 220-240V, 50/60 Hz
Minimum Load Impedance	(Low Impedance Output, 70V Output, 100V Output) VMA260: 4 Ω, 80 Ω,160 Ω VMA2120: 4 Ω, 40 Ω, 80 Ω
Operating Temperature/Humidity	0°C to 35°C @ 95% R.H. (non-condensing)
Storage Temperature	-20°C to 85°C
Net Weight	VMA260: 25.5 lb (11.6 kg) VMA2120: 29.3 lb (13.3 kg)
Dimensions	Width: 17.0 in. (432 mm) Depth: 16.3 in. (415 mm) Height: 3.5 in. (88 mm)
Shipping Weight	VMA260: 30.8 lb (14 kg) VMA2120: 34.5 lb (15.7 kg)