JBL Professional Control 25-1L

Hình ảnh lớn hơn

Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker

The Control® 25-1L is a two-way 5-¼” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

Tính năng

5-¼” woofer with woven fiberglass cone
3/4” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
100 Watt power handling (200 Watt program)
High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

Tải xuống

Specifications

	Phiên bản	Kích thước	Đã tải lên
Control 25-1L Spec Sheet phiên bản C, cập nhật: Thg 11 2021	C	800 KB	Thg 11 2021

Manuals

	Kích thước	Đã tải lên
MTC-23UB-1, 25UB-1, 28UB-1 U Bracket Install Guide cập nhật: Thg 10 2019	70 KB	Thg 10 2019

Brochures

	Phiên bản	Ngôn ngữ	Kích thước	Đã tải lên
Loudspeakers for Sports Facilities cập nhật: Thg 7 2024			6 MB	Thg 7 2024
Control Contractor Brochure (2024) phiên bản D, cập nhật: Thg 2 2024	D		10 MB	Thg 2 2024
Control Contractor Brochure (2025) phiên bản A, cập nhật: Thg 3 2026	A		20 MB	Thg 3 2026
Control Contractor Brochure (2026) cập nhật: Thg 3 2026			20 MB	Thg 3 2026

CAD Drawings

	Kích thước	Đã tải lên
Control 23-1, 25-1, 28-1 Bracket 2D & 3D CAD, PDF cập nhật: Thg 10 2020	6 MB	Thg 10 2020
Control 25-1/L 2D Drawing cập nhật: Thg 10 2020	500 KB	Thg 10 2020
Control 25-1/L 3D Drawing cập nhật: Thg 10 2020	3 MB	Thg 10 2020

BIM Objects

	Kích thước	Đã tải lên
Control 25-1 BIM Object cập nhật: Thg 8 2019		Thg 8 2019

Compliances

	Kích thước	Đã tải lên
JBL Control Series Passive Speakers DoC cập nhật: Thg 12 2019	200 KB	Thg 12 2019
Control Contractor 20-1(L) Declaration of Conformity cập nhật: Thg 10 2019	80 KB	Thg 10 2019
Control Contractor Series Declaration of Conformity cập nhật: Thg 10 2019	100 KB	Thg 10 2019

Software

	Phiên bản	Kích thước	Đã tải lên
Distributed System Design (DSD) phiên bản 3.9, cập nhật: Thg 11 2025	3.9	600 KB	Thg 11 2025

Simulation Data

	Phiên bản	Kích thước	Đã tải lên
JBL Pro ALL CLF Files phiên bản 12-10-21, cập nhật: Thg 5 2023	12-10-21	20 MB	Thg 5 2023

Accessories

	Kích thước	Đã tải lên
WeatherMax Grille Photos cập nhật: Thg 4 2021	3 MB	Thg 4 2021
U-Bracket Install guide cập nhật: Thg 10 2020	70 KB	Thg 10 2020

Install Guides

	Kích thước	Đã tải lên
Painting HIPS Loudspeaker Cabinets cập nhật: Thg 6 2023	400 KB	Thg 6 2023
Guide to Business Music cập nhật: Thg 10 2020	50 KB	Thg 10 2020
Attaching Control Contractor Speakers to Stands cập nhật: Thg 11 2019	80 KB	Thg 11 2019
Invisiball™ Installation Instructions cập nhật: Thg 9 2019	200 KB	Thg 9 2019

Speaker Tunings

	Phiên bản	Kích thước	Đã tải lên
Commercial, CBT, and AWC Tunings 220616 phiên bản A, cập nhật: Thg 5 2023	A	600 KB	Thg 5 2023

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Phụ tùng & Dịch vụ

Thông số kỹ thuật

Frequency Range (-10dB)	60 Hz to 20 kHz
Frequency Response (±3 dB)	85Hz - 17 kHz
Power Rating	200 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.
Maximum Input Voltage	25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL (1m)	110 dB ave. Continuous Pink Noise (116 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
Sensitivity	90 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
Coverage Angle	100°H x 100°V
Directivity Factor (Q)	6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI)	7.6dB (averaged 1kHz – 16kHz)
Impedance	8 ohms
Crossover Type	2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass	60 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
Drivers	LF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure	High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille	Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation	InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor Capability	IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input Connectors	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Safety Agency	ROHS-compliant
Colors	Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)	243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
Net Weight (each)	3.0 kg (6.7 lbs)
Shipping Weight	7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
Included Accessories	InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
Optional Accessories	MTC-25UB-1 – Yolk-type U-bracket (&-WH)
Mounting Hardware	InvisiBall™ aimable wall-mounting system included. Optional U-bracket.