JBL Professional Control 25-1L

Gambar Lebih Besar

Speaker Latar Belakang/Latar Depan Indoor/Outdoor Kompak 8-Ohm

Control® 25-1L adalah speaker dua-arah 5-¼" dengan karakter sonik yang kaya, jangkauan luas, dispersi konsisten, pemasangan serbaguna, dan desain kontemporer berkualitas tinggi yang cocok dengan berbagai dekorasi. Ini membuat Control 25-1L menjadi pilihan luar biasa untuk berbagai aplikasi, termasuk toko ritel, restoran, klub kesehatan, taman hiburan, fasilitas pendidikan, perhotelan, kafe musik, tempat hiburan, dan di mana pun speaker musik latar belakang/latar depan indoor/outdoor berkualitas tinggi dengan keluaran tinggi (dan/atau sistem paging) diperlukan.

Fitur

Woofer 5-¼" dengan membran fiberglass yang dianyam
Tweeter diafragma PEI 3/4" dengan pendinginan cairan
Desain kontemporer dengan penampilan berkualitas tinggi
Perangkat keras pemasangan InvisiBall® bawaan, ditambah U-bracket yang tersedia
Enklosure dan transduser tahan cuaca
Jangkauan luas 100° x 100°
Penanganan daya 100 Watt (program 200 Watt)
Karakter suara kesetiaan tinggi dengan respons frekuensi luas 60 Hz – 20 kHz.

Unduhan

Specifications

	Versi	Ukuran	Diunggah
Control 25-1L Spec Sheet versi C, diperbarui: Nov 2021	C	776 KB	Nov 2021

Manuals

	Ukuran	Diunggah
MTC-23UB-1, 25UB-1, 28UB-1 U Bracket Install Guide diperbarui: Okt 2019	67,7 KB	Okt 2019

Brochures

	Versi	Bahasa	Ukuran	Diunggah
Loudspeakers for Sports Facilities diperbarui: Jul 2024			5,71 MB	Jul 2024
Control Contractor Brochure (2024) versi D, diperbarui: Feb 2024	D		14 MB	Feb 2024
Control Contractor Brochure (2025) versi A, diperbarui: Mar 2026	A		23 MB	Mar 2026
Control Contractor Brochure (2026) diperbarui: Mar 2026			21 MB	Mar 2026

CAD Drawings

	Ukuran	Diunggah
Control 23-1, 25-1, 28-1 Bracket 2D & 3D CAD, PDF diperbarui: Okt 2020	5,81 MB	Okt 2020
Control 25-1/L 2D Drawing diperbarui: Okt 2020	487 KB	Okt 2020
Control 25-1/L 3D Drawing diperbarui: Okt 2020	2,53 MB	Okt 2020

BIM Objects

	Ukuran	Diunggah
Control 25-1 BIM Object diperbarui: Agu 2019		Agu 2019

Compliances

	Ukuran	Diunggah
JBL Control Series Passive Speakers DoC diperbarui: Des 2019	179 KB	Des 2019
Control Contractor 20-1(L) Declaration of Conformity diperbarui: Okt 2019	75,9 KB	Okt 2019
Control Contractor Series Declaration of Conformity diperbarui: Okt 2019	131 KB	Okt 2019

Software

	Versi	Ukuran	Diunggah
Distributed System Design (DSD) versi 3.9, diperbarui: Nov 2025	3.9	612 KB	Nov 2025

Simulation Data

	Versi	Ukuran	Diunggah
JBL Pro ALL CLF Files versi 12-10-21, diperbarui: Mei 2023	12-10-21	24 MB	Mei 2023

Accessories

	Ukuran	Diunggah
WeatherMax Grille Photos diperbarui: Apr 2021	2,75 MB	Apr 2021
U-Bracket Install guide diperbarui: Okt 2020	67,7 KB	Okt 2020

Install Guides

	Ukuran	Diunggah
Painting HIPS Loudspeaker Cabinets diperbarui: Jun 2023	377 KB	Jun 2023
Guide to Business Music diperbarui: Okt 2020	52,4 KB	Okt 2020
Attaching Control Contractor Speakers to Stands diperbarui: Nov 2019	76,4 KB	Nov 2019
Invisiball™ Installation Instructions diperbarui: Sep 2019	227 KB	Sep 2019

Speaker Tunings

	Versi	Ukuran	Diunggah
Commercial, CBT, and AWC Tunings 220616 versi A, diperbarui: Mei 2023	A	557 KB	Mei 2023

Jika ada tautan di atas yang menampilkan karakter aneh di browser Anda, klik kanan file tersebut untuk menyimpannya ke komputer Anda.

Suku Cadang & Servis

Spesifikasi

Frequency Range (-10dB)	60 Hz to 20 kHz
Frequency Response (±3 dB)	85Hz - 17 kHz
Power Rating	200 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.
Maximum Input Voltage	25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL (1m)	110 dB ave. Continuous Pink Noise (116 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
Sensitivity	90 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
Coverage Angle	100°H x 100°V
Directivity Factor (Q)	6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI)	7.6dB (averaged 1kHz – 16kHz)
Impedance	8 ohms
Crossover Type	2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass	60 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
Drivers	LF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure	High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille	Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation	InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor Capability	IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input Connectors	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Safety Agency	ROHS-compliant
Colors	Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)	243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
Net Weight (each)	3.0 kg (6.7 lbs)
Shipping Weight	7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
Included Accessories	InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
Optional Accessories	MTC-25UB-1 – Yolk-type U-bracket (&-WH)
Mounting Hardware	InvisiBall™ aimable wall-mounting system included. Optional U-bracket.