Intellivox DSX180
Utgått

Active Beam Shaping Self Powered Column Loudspeaker Array

Intellivox DSX180
Större bilder

Active Beam Shaping, Self Powered, Column Loudspeaker Array

The Intellivox-DSX180 is ideally suited for smaller less reverberant environments where improved speech intelligibility is required. It also can be used as a ‘fill system’ in larger Intellivox installations, providing coverage in shadow zones. A single Intellivox-DSX180 is capable of covering an area of up to 25 m while maintaining an even sound pressure over the audience area. The ten, custom designed, 4” loudspeakers and the four 1" dome tweeters are driven by an eight channel class-D amplifier, powered by a sophisticated switched mode power supply, all of which combine to ensure years of reliable operation.

The dome tweeters in the DSX units not only improve the horizontal coverage at high frequencies but also enhance the subjective sound quality of the system for both speech and music.

An extensive set of surveillance functions have also been implemented to meet the stringent demands of typical Voice Alarm (life safety) applications. The unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing and surveillance features. Its modest array length makes the Intellivox-DSX180 suitable for easy and unobtrusive implementation in even the most architecturally sensitive environment. The low frequency response of the system can be easily extended using a JBL sub woofer system.

 

Funktioner

  • Superb Speech Intelligibility
  • Slim Unobtrusive Design
  • Extended Frequency Response - up to 18kHz
  • Higher Fidelity
  • Wide Horizontal Dispersion
  • Vertical Beam Shaping (DDS Technology)
  • 32-bit floating point DSP
  • Control of Vertical Beam Shaping
  • Dual Line Inputs
  • Volume Control
  • Delay (up to 20 seconds)
  • 8 band parametric EQ
  • 8 user definable, password protected presets on board (recallable through third party control devices)
  • AVC (Automatic Volume Control) via build-in ambient mic.
  • Upgradeable firmware
  • Network Ready
  • Integral Surveillance
  • Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3
 

Applications

  • Fill or Delay System in larger Intellivox installations
  • Places of Worship
  • Conference Facilities
  • Lecture Halls
  • A/V Presentation Rooms
 

Options

  • External Ambient Noise and Temperature Sensor
  • Input section with 1 x 0dBV and 1 x 100V
  • Input section with 2 x 100V
  • Full range of mounting accessories
  • Color matching service

Nedladdningar

Data Sheets
  Storlek Uppladdat
file type icon Intellivox DSX180 Datasheet
uppdaterad: okt 2020
720 KB okt 2020
Manuals
  Storlek Uppladdat
2,28 MB mar 2024
Brochures
  Storlek Uppladdat
file type icon Intellivox Brochure
uppdaterad: okt 2020
23 MB okt 2020
CAD Drawings
  Storlek Uppladdat
file type icon Standard Series Drawings PDF
uppdaterad: okt 2020
2,37 MB okt 2020
file type icon Standard Series Drawings DWG
uppdaterad: okt 2020
3,98 MB okt 2020
BIM Objects
  Storlek Uppladdat
file type icon Intellivox BIM Files
uppdaterad: okt 2020
4,17 MB okt 2020
Software
  Version Storlek Uppladdat
download icon for DDA (Digital Directivity Analysis) DDA (Digital Directivity Analysis)
version 5.1 (License free), släppt: apr 2020
5.1 (License free)   207 MB apr 2020
Windows download icon WinControl with RAPID DDS™
version 2p96, släppt: aug 2023
2p96   56,3 MB aug 2023
download icon for SketchUp plug-in SketchUp plug-in
version 2019, släppt: feb 2020
2019   746 KB feb 2020
Ease Data
  Version Storlek Uppladdat
file type icon DDA Libraries for EASE DLL
version 1.0, uppdaterad: okt 2020
1.0  2,01 MB okt 2020
file type icon Intellivox EASE DLL
uppdaterad: feb 2026
  3,78 MB feb 2026
file type icon Intellivox EASE GLL
uppdaterad: okt 2019
  5,43 MB okt 2019
Design Guides
  Språk Storlek Uppladdat
en  3,31 MB dec 2022

Om någon av länkarna ovan resulterar i konstiga tecken i din webbläsare, högerklicka på filen för att spara den på din dator.

Reservdelar och service

Specifikationer

Maximum SPL (30m) Continuous : 89 dB SPL
Peak : 92 dB SPL
Typical Maximum Throw 15-25 m / 49-82 ft
Drivers 10 x 4” full range
4 x 10 mm ferrofluid cooled tweeter, coaxially mounted
Dimensions Height- 1780mm
Width- 134mm
Depth- 92mm
Weight- 19kg / 41.8lb
Enclosure stainless steel (AISI 304) with epoxy coating
Color Enclosure and grill : RAL 9010 (white)
Speaker baffle : RAL 9011 (black)
Optional Accessories Multiple optional accessories available. Please see spec sheet or your local dealer for more info.
Coverage Angle Vertical complex beam shaping (via software), wide horizontal dispersion (consult spec sheet for details)

Tillbehör

JBL Intellivox Software | Förståelse för Intellivox riktningsteknologi och programvarutyper
JBL Intellivox Software Main photo
Större bilder
JBL Intellivox Software detail thumbnail #1
Riktningsteknik
Högtalare
Programvara
DDC™
Digital Directivity Control™ tillhandahåller beam-STYRNING baserad på inriktningsparametrar.
DC-modeller
WinControl – Gör det möjligt att ställa in inställningarna för DDC beam-STYRNING. Samma programvara kommunicerar med och överför inställningarna till högtalaren/högtalarna

DDS™
Complex Digital Directivity Synthesis™ tillhandahåller komplex rumstäckning via beam-UTFORMNING. Utformningsalgoritmen baseras på en modell av rummet eller lyssningsområdet, vilket resulterar i konsekvent SPL och konsekvent frekvensrespons från plats till plats inom lyssningsområdet.
DS & DSX-modeller
FÖR MINDRE KOMPLEXA LYSSNINGSRUM:
WinControl™ – RAPID DDS™ (som är inbyggd i WinControl) väljer rätt DDS™-inställningar baserat på grundläggande rum- och användningsparametrar. Samma programvara överför sedan inställningsfilen till högtalaren/högtalarna genom att klicka på "Tillämpa".

FÖR MER KOMPLEXA LYSSNINGSRUM:
DDA™ (Digital Directivity Analysis™) för modellering av ett lyssningsrum och beräkning av DDS beam-UTFORMNINGSALGORITMER. Plus WinControl™ för överföring av inställningsfilen till högtalaren/högtalarna.
 
Programvarusystem
Högtalare
WinControl™
  • Styr direkt DDC™-drivna produkter för: 1) inriktningsaxel, 2) öppningsvinkel och 3) fokusavstånd. 
  • Den används också för att ställa in andra audioparametrar, inklusive 8 parametriska EQ-band, fördröjning, AVC-funktioner (automatisk volymkontroll), volymsnivå, övervakningsrelaterade parametrar, pilottondetektering, prioritetsväxling, 8 kompletta förinställningar och mer. 
  • Möjliggör överföring av DDA™-beräknade DDS™-riktningsfiler till högtalarna. 
  • RAPID DDS™ möjliggör skapande av DDS™-filer till högtalare utan att behöva använda DDA™.
DC-, DS- och DSX-modeller

DDA™
  • Integrerar geometrisk modellering, direktljudsprediktion, statistisk rumslig akustisk prediktion, grafisk visualisering, strålningsmönsteroptimerering och generering av utgångsfilter-filer.
  • Filen överförs till WinControl™ för överföring till DSP-enheterna i högtalarna.
DDA stöder alla produkter (DC, DS och DSX) men du kan endast exportera beam UTFORMNINGSINSTÄLLNINGAR för DS och DSX.


 



 


Support/FAQ

HARMAN Professional Solutions: