Premium inomhus-/utomhushögtalarmonitor
Större bilder
Funktioner
- Utökad bandbredd, extremt jämn frekvensrespons.
- 110° x 85° HF-täckning, roterbar horn.
- 110 W transformator för 70 V eller 100 V linjer, med 8 ohm genomkoppling.
- SonicGuard™ överbelastningsskydd.
- 200 mm (8 tum) Kevlar-membran för låga frekvenser,
25 mm (1 tum) titan-membran i kompressionsdrivare. - Inkluderar InvisiBall™ monteringshårdvara, plus tio 6 mm fästpunkter för upphängning och
valfri U-konsol. - Tätad indatapanelövertäckning och skruvfasta indatakontakter.
Nedladdningar
Data Sheets
| Storlek | |
|
|
1,1 MB |
Brochures
| Storlek | |
|
|
5,71 MB |
|
|
14 MB |
|
|
23 MB |
|
|
21 MB |
uppdaterad: jul 2024
CAD Drawings
| Storlek | |
|
|
253 KB |
|
|
652 KB |
|
|
83,7 KB |
Compliances
| Storlek | |
|
|
179 KB |
|
|
131 KB |
Simulation Data
| Storlek | |
|
|
24 MB |
Install Guides
| Storlek | |
|
|
230 KB |
|
|
377 KB |
|
|
52,4 KB |
|
|
5,12 MB |
|
|
27,4 KB |
|
|
147 KB |
|
|
37,6 KB |
|
|
87,7 KB |
|
|
227 KB |
|
|
76,4 KB |
Speaker Tunings
| Storlek | |
|
|
557 KB |
Ease Data
| Storlek | |
|
|
338 KB |
Accessories
| Storlek | |
|
|
337 KB |
|
|
85,3 KB |
Om någon av länkarna ovan resulterar i konstiga tecken i din webbläsare, högerklicka på filen för att spara den på din dator.
Reservdelar och service
Specifikationer
| Frequency Range | 37 Hz –18 kHz (-10 dB) |
| Power Capacity | 300 W Continuous Program Power; 150 W Continuous Pink Noise |
| Transformer Taps | 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal |
| Frequency Response | 45 Hz – 18 kHz ( ± 3 dB) |
| Maximum SPL (1m) | Short-Term: 120 dB; Long-Term: 114 dB |
| Nominal Sensitivity | 90 dB (2.83V / 1m) |
| Coverage Angle | 110°H x 85°V, Rotatable |
| Directivity Factor (Q) | 7.2 dB, averaged 500 Hz to 16 kHz |
| Directivity Index (DI) | 8.6 dB, averaged 500 Hz to 16 kHz |
| Impedance | 8 ohms |
| Minimum Impedance | 6.3 ohms @ 230 Hz |
| Crossover Network | 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency |
| Drivers | LF: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround |
| Enclosure | High impact polystyrene |
| Grille | Thermoset composite coated steel, WeatherMax multi-layer foam |
| Overload Protection | Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions. |
| Outdoor Capability | IEC 529 IP-X4 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray. |
| Input Connectors | Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2). |
| Safety Agency | Transformer is listed per UL1876 |
| Colors | Black or white (-WH) |
| Dimensions (H x W x D) | 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.) |
| Net Weight (each) | 12.2 kg (26.8 lb.) |
| Shipping Weight (ea) | 14.0 kg (30.8 lb.) |
| Included Accessories | 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench. |
| Optional Accessories | MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket |
| Mounting Hardware | InvisiBall™ aimable wall-mounting system included. Optional U-bracket. |
HARMAN Pro Insights
JBL Control Contractor Loudspeakers: Around the World in Eight Epic Installs
Commercial audio designers and consultants have many choices when selecting the right manufacturer, product and solution to fulfill the unique requirements of each client’s particular installed audio application. The JBL Control Contactor Series was developed specifically to target these users with purpose-built ceiling, pendant, in-wall,
CONTINUE READING
Konsultsupport