With 12 inputs and 6 outputs and Ethernet control the dbx ZonePRO® 1260 is the newest members of the ZonePRO® family providing a complete suite of signal processing and control for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 1260/1261 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 1260 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.
Beyond processing, the ZonePRO® products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters. The addition of Ethernet control means that not only will it work with standard network equipment, but it can also be accessed from remote dialup locations or from wireless access points.
The ZonePRO® 1260 will take your Commercial Audio system to the next level with advanced processing, versatility and control.
Recursos
- Advanced Feedback Suppression (AFS™)
- Autowarmth®
- Auto Gain Control
- Compression
- Limiting
- Noise Gating
- Notch Filtering
- Bandpass and Crossover Filters
- Parametric EQ
- Security Lockout
- Wall Panel Control
- RS-232 Control
- IEC, UL and CSA Approvals
Downloads
Size | ||||
1260 Guia de Aplicação-English
updated: Mar 2024
|
2,11 MB | |||
1260 Brochura-English
updated: Mar 2024
|
733 KB | |||
1260 Desenho Frente CAD
updated: Mar 2024
|
132 KB | |||
1260 Desenho Traseira CAD
updated: Mar 2024
|
115 KB | |||
1260 Folheto Técnico-English
updated: Mar 2024
|
1,36 MB | |||
1260 Manual de Instalação-Spanish
updated: Mar 2024
|
487 KB | |||
ZonePRO-1260-Health-Club-application.pdf
updated: Mar 2024
|
1,95 MB | |||
Software | ||||
AMX dbx ZonePRO Controllers
version 2.1,
updated: Ago 2016
|
563 KB | |||
Crestron dbx ZonePRO controller
version 3.0,
updated: Ago 2016
|
4,99 MB | |||
ZonePRO String Calculator
version 1.3,
updated: Ago 2016
|
184 KB | |||
ZonePRO GUI Designer
version 3.2,
updated: Mai 2022
|
15,1 MB | |||
Tech Notes | ||||
ZC Connectivity and Association
updated: Out 2020
|
274 KB | |||
Application Guides | ||||
HARMAN Reception Area AV Solution for Business
updated: Dez 2015
|
||||
HARMAN Open Offices AV Solution for Business
updated: Dez 2015
|
||||
HARMAN Lobby AV Solution for Business
updated: Dez 2015
|
||||
HARMAN Common Areas AV Solution for Business
updated: Dez 2015
|
||||
HARMAN Break Room AV Solution for Business
updated: Dez 2015
|
||||
Safety Sheets | ||||
Safety Sheet-English
updated: Ago 2017
|
328 KB | |||
3rd Party Resources | ||||
ZonePro Protocol Guide
updated: Out 2020
|
246 KB | |||
Install Guides | ||||
Install Guide-English
updated: Out 2020
|
11 MB | |||
Training Resources | ||||
ZonePRO Training (All)
updated: Out 2020
|
367 MB | |||
Quick Start Guides | ||||
Quick Start Guide-English
updated: Ago 2017
|
860 KB |
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.
Especificações
Entradas | 12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF |
Input Connectors | Euroblock (Line and Mic) RCA (Source) |
Impedância de Entrada | Euroblock > 50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA >25kΩ Unbalanced, RF Filtered |
Entrada Máxima | +20dBu Mic/Line, +12dBu RCA |
CMRR | > 40dB, typically >55db @ 1kHz |
Mic Preamp gain | 30 to 60dB |
Ruído de entrada equivalente Pré-amp de Mic | <-118dB |
Mic Preamp Phantom Power | 15V |
Saídas | 6 Analog |
Conectores de Saída | Euroblock |
Output Type | Electronically balanced, RF filtered |
Impedância de Saída | 120 ohms balanced, 60ohm unbalanced |
Saída Máxima | +20dBu |
Conversos A/D | dbx Type IV™ conversion system |
A/D Dynamic Range | (line) >113 dB, A-weighted, >110 dB unweighted |
Type IV Dynamic Range | >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW |
Taxa de Amostragem | 48kHz |
D/A Dynamic Range | 112 dB A-weighted, 109dB unweighted |
Faixa Dinâmica | >110 dB A-weighted, >107dB unweighted |
THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
Resposta de Frequência | 20Hz - 20kHz, +/-0.5dB |
Interchannel Crosstalk | >80dB typical |
Propagation Delay | 0.6 msec |
Operating Voltage | 100-240 VAC, 50/60Hz |
Consumo de energia | 27 W |
Peso unitário | 6.8 lbs.(3.1 kg) |
Peso de Envio | 8.8 lbs. (4.0 kg) |
Dimensões | 1.75” H x 5.75” D x 19” W |
Safety Agency Certifications | UL 60065, IEC 60065, E 60065, EN 55013 |
Módulos de Treinamento
- ZonePRO Overview
- ZonePRO Programming an Offline Device
- ZonePRO Basic Programming Overview
- ZonePRO Training Modules Overview
- ZonePRO Connecting via RS232
- ZonePRO Software-Firmware Compatibility
- ZonePRO Networking Properties & Wizard
- ZonePRO Help Menu
- ZonePRO Configuring The Serial Connection
- ZonePRO Configuring The Ethernet Connection
- ZonePRO Audio Inputs & Outputs
- ZonePRO Link Inputs & Outputs
- ZonePRO Zone Controller Inputs
- ZonePRO Program Screen
- ZonePRO Configuration Wizard - Source Configuration
- ZonePRO Configuration Wizard - Zone Configuration
- ZonePRO Configuration Wizard - ZC Panel Configuration
- ZonePRO Configuration Wizard - Source ZC Association
- ZonePRO Configuration Wizard - Routing and Zone ZC Association
- ZonePRO Configuration Wizard - Front Panel Configuration
- ZonePRO Paging and Priority Overrides Explained
- ZonePRO DSP - Input Processing
- ZonePRO DSP - Parametric EQ
- ZonePRO DSP - Automatic Gain Control
- ZonePRO DSP - Notch Filter
- ZonePRO DSP - Compressor
- ZonePRO DSP - Noise Gate
- ZonePRO DSP - De-esser
- ZonePRO DSP - Advanced Feedback Supression
- ZonePRO DSP - Mid Router
- ZonePRO DSP - Mid Mixer
- ZonePRO DSP - Auto Warmth
- ZonePRO DSP - Band Pass Filter
- ZonePRO DSP - Limiter
- ZonePRO DSP - Ambient Noise Compensation
- ZonePRO DSP - Delay
- ZonePRO DSP - Output Polarity
- ZonePRO DSP - Storing/Recalling Scenes
- ZonePRO Programming - Scene Wizard
- ZonePRO Programming - Schedule Wizard
- ZonePRO Programming - Saving/Opening Files
Suporte/FAQs
1260 FAQs
How can I perform a hard reset on the 1260 ZonePRO?
The following procedure will reset all settings on the ZonePRO 1260
While powering on the unit press and hold the <2> button (next to the display) until the following message appears:
!: HARD RESET?
Press the <UTIL> button (large knob) in to reset the unit.
Pressing the <PAGE 1> button will abort the System Reset sequence and the unit will reset normally.
How can I perform a soft reset on the 1260 ZonePRO?
The following procedure will reset all settings on the ZonePRO 1260 except for user programs.
While powering on the unit press and hold the <3> button (next to the display) until the following message appears:
!: SOFT RESET?
Press the <UTIL> button (large knob) in to reset the unit.
Pressing the <PAGE 1> button will abort the System Reset sequence and the unit will reset normally.
Which serial adapters work with the 1260 ZonePRO?
Please refer to the following: RS-232Adaptors.pdf
How to connect to a dbx ZonePRO Processor using ZonePRO Designer Software
ZonePRO You Tube Video Link:
Connecting to a dbx ZonePRO Processor using ZonePRO Designer Software
How to setup a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
ZonePRO You Tube Video link:
Setting up a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
How do you set up page steering in ZonePRO Designer using dbx ZC-3 and ZC-7 controllers?
ZonePRO YouTube Video Link: