VLA-C125S는 듀얼 15" Differential Drive® 트랜스듀서를 탑재한 JBL의 검증된 기술 구성요소를 사용합니다.
인클로저는 다층 강화 파이버글라스와 스틸 엔드 패널로 제작되었습니다. 그릴은 아연 도금 및 파우더 코팅 처리된 14게이지 천공 스틸로, 음향 투과성 블랙 그릴 천 백킹, 소수성 메시 언더레이어, 방수 레일 시스템을 갖추고 있습니다.
리깅 시스템은 시스템 설계에 내재되어 있습니다. 박스 간 각도는 어레이 조립 시 선택됩니다. 기타 액세서리로는 리깅 프레임, 풀백 바, 카디오이드 키트가 포함됩니다.
| 크기 | |
|
|
1.15MB |
| 크기 | |
|
|
6.52MB |
| 크기 | |
|
|
5.71MB |
| 크기 | |
|
|
3.94MB |
|
|
5.49MB |
|
|
797KB |
| 크기 | |
|
|
3.35MB |
|
|
5.53MB |
| 크기 | |
|
|
9.01MB |
| 크기 | |
|
|
157KB |
|
|
1.48MB |
|
|
2.79MB |
| 크기 | |
|
|
637KB |
|
|
747KB |
위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하십시오.
| Frequency Range (-10 dB) | 52 Hz – 210 Hz |
| Frequency Response (±3 dB) | 62 Hz – 123 Hz |
| System Power Rating | 1600 W Continuous Pink Noise (6400 W peak), 2 hrs800 W Continuous Pink Noise (3200W peak), 100 hrs |
| Maximum Input Voltage | 80 V Rms (2 hrs), 160 V peak |
| Maximum SPL (1m) | 127 dB Cont. Ave (2 hrs), 133 dB Peak |
| Sensitivity | 98 dB (52 Hz – 210 Hz, 2.83V) |
| Impedance | 4Ω, 3.0Ω min @ 195 Hz |
| Amplifiers | Crown DCi Family with DSP on-board |
| Recommended | Crown DCi 2 | 2400N Crown DCi 4 | 2400N |
| LF Driver | 2 x 2275H, 304 mm (15 in) diameter , each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™ |
| Enclosure Material | Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing. |
| Grille | Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen. |
| Inter-Enclosure Angles | VLA-C125S to VLA-C125S: 0° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S) |
| Environmental | IP-55 rating per IEC529 (dust protected and protected against jets of water). |
| Terminals | CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers. Full set of terminals on back panel, plus optional-use inter-cabinet connection terminals located on top and bottom panels of cabinet. |
| Colors | -GR: Gray (similar to Pantone 420C), -BK: Black |
| Dimensions (H x W x D) | 508 x 848 x 634 mm (20.0 x 33.4 x 24.9 in) |
| Net Weight (each) | 56.7 kg (125 lbs) |
| Shipping Weight (ea) | 62.6 kg (138 lbs) |
| Included Accessories | 2 x VLA-C125S Bracket Plates 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hex-drive) for attaching Bracket Plates 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts. |
| Optional Accessories | VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit VLA-C125S-ACC Kit – For wiring of 3 VLA-C-125S subwoofers in cardioid configuration (2 front-facing and 1 rear-facing). Allows for neat, unexposed inter-cabinet wiring via the tops and bottoms of cabinets. |
Stadiums and arenas are about much more than just delivering engaging matchups, a significant amount of time is spent…
English Premier League football side Tottenham Hotspur wanted an exceptional audio experience to complement their newly…
버전 A,
업데이트됨: 2025년 3월월
컨설턴트 지원