Wi-Fi 기능이 탑재된 18" 자체 전원 확장 저주파 서브우퍼 시스템
JBL PRX818XLF는 자체 전원 확장 저주파 서브우퍼 시스템입니다. 1500와트 Class-D 앰프로 구동되는 JBL 18인치 우퍼를 탑재하여, PRX818XLF는 경량 및 컴팩트한 폼 팩터로 탁월한 출력을 제공합니다.
JBL PRX818XLF는 자체 전원 확장 저주파 서브우퍼 시스템입니다. 1500와트 Class-D 앰프로 구동되는 JBL 18인치 우퍼를 탑재하여, PRX818XLF는 경량 및 컴팩트한 폼 팩터로 탁월한 출력을 제공합니다.
| 크기 | |
|
|
818KB |
|
|
1.83MB |
| 크기 | |
|
|
1.3MB |
| 크기 | |
|
|
1.79MB |
| 크기 | |
|
|
|
|
|
| 크기 | |
|
|
143KB |
| 크기 | |
|
|
7.25MB |
|
|
2.42MB |
|
|
5.49MB |
| 크기 | |
|
|
445KB |
위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하십시오.
| System Type | Self Powered 18” subwoofer |
| Maximum SPL Output | 134 dB peak |
| Frequency Range (-10 dB) | 30 Hz - 103 Hz |
| Frequency Response (±3 dB) | 35 Hz – 87 Hz |
| Inputs | Two Balanced female XLR/ 1/4” combo connectors |
| Input Impedance | 20K Ohms (balanced) |
| Signal Indicators | Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power: Blue indicates system has power and ready |
| Dynamic Control (Input) | dbx Type IV™ limiter circuit |
| System Low Pass | 80 Hz |
| Loop out Crossover Frequency | 80Hz Digital 24db/octave Linkwitz-Riley Filter |
| Design | Highly efficient Class-D amplifier |
| Power Rating | 1500W |
| AC power input | 100V - 240V ~ 50/60 Hz |
| LF Driver | 1 x JBL 2278H 460 mm (18 in) woofer |
| Enclosure | Rectangular, 18 mm, birch-poplar mix |
| Transport | 2 x injection molded handles with backing cup |
| Finish | Obsidian DuraFlex™ finish |
| Grille | Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. |
| Dimensions (H x W x D) | 692 mm x 523 mm x 724 mm (27.26 in x 20.6 in x 28.5 in) |
| Net Weight | 36.28 kg (80.0 lb) |
| Gross Weight | 45.0 kg (100.0 lb) |
| Mic Inputs | 2 |
| Phantom Power | No |
| EQ | 8-band parametric EQ |
| Effects | 25 parametric EQ's and speaker delay |
| Outputs | 1 x XLR (mix out) |
Aluminum Tripod Speaker Stand with Secure Locking Pin and 150 lbs Load Capacity. To assist you in lifting your speaker, we’ve added a durable Lift Ring on the telescoping tube to give your upper hand something to push against when raising the speaker to the desired height.
Gas Assist Speaker Pole with M20 Threaded Lower End, 38mm Pole & 35mm Adapter. The JBLPOLE-GA is the easiest speaker stand to use thanks to the internal pneumatic shock that literally raises the speaker for you. The stand’s internal shock easily raises speakers weighing 35 lbs and less with no effort from the user.
Manual Adjust Speaker Pole with M20 Threaded Lower End, 38mm Pole & 35mm. The JBLPOLE-MA features an amazing height adjustment collar that features an ergonomic “Z” knob that provides comfortable adjustment. The strongest fitting made, the height adjustment collar prevents over- tightening and breakage issues associated with all plastic designs.