| Frequency Range (-10 dB) |
70 Hz – 18 kHz |
| Frequency Response (±3 dB) |
100 Hz – 16 kHz |
| Coverage Pattern |
110º x 110º |
| Directivity Factor (Q) |
7.2 (1 k – 16 kHz) |
| Directivity Index (DI) |
7.9 dB (1 k – 16 kHz) |
| System Power Rating |
175 W 2 hrs. 120 W 100 hrs (IEC rated) |
| Sensitivity (2.83V @ 1m) |
92 dB (Ave. 100 Hz – 18 kHz) |
| Maximum SPL (1m) |
Direct 8Ω: 114 dB (peaks of 120 dB)120 W Tap: 112 dB |
| Crossover Network |
1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF |
| Nominal Impedance |
8 ohms |
| Transformer Taps |
70V: 120W, 60W, 30W, 15W 100V: 120W, 60W, 30W |
| LF Driver |
Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil. |
| HF Driver |
25 mm (1 in) diaphragm and voice coil diameter |
| HF Driver Protection |
Minimum audibility SonicGuard™ HF overload protection |
| Enclosure |
ABS with Glass enclosure |
| Attachment |
Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |
| Grille |
Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. |
| Input Connection |
CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16”) and 9.0 mm (0.36”). |
| Environmental |
IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). |
| Dimensions |
259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet 288 mm (11.4 in) including gland nut 309 mm (12.2 in) including bracket extending to back |
| Colors |
Available in gray (similar to Pantone 420C) and black (-BK) |
| Net Weight (each) |
6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket |
| Shipping Weight |
8.8 kg (19.5 lb) |
| Included Accessories |
U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel. |
| Crossover Modes |
Passive |
| System Sensitivity (1w @ 1m) |
92 dB (Ave. 100 Hz – 18 kHz |
| Suspension Attachment |
Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |
更新: 2024年7月
コンサルタント サポート