Intellivox DSX430

Active Beam Shaping Self Powered Column Loudspeaker Array

较大的图像

Active Beam Shaping, Self Powered, Column Loudspeaker Array

The Intellivox-DSX430 is the second tallest of Duran Audio’s fully integrated digitally controlled loudspeaker arrays. A single Intellivox-DSX430  is capable of covering an area of up to 50 m while maintaining an even sound pressure level. Its array length not only offers long throw capability but also extended control at lower frequencies, making it ideally suited to highly reverberant environments. The thirteen, custom designed, 4” loudspeakers  and eight 1" dome tweeters are driven by a sixteen channel class-D amplifier, powered by a sophisticated switched mode power supply, all of which combine to ensure years of reliable operation.

The dome tweeters in the DSX units not only improve the horizontal coverage at high frequencies but also enhance the subjective sound quality of the system for both speech and music.

An extensive set of surveillance functions have also been implemented to meet the stringent demands of typical Voice Alarm (life safety) applications.

The unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing, pre-sets  and surveillance features. The increased lower frequency control offered by the array makes the Intellivox-DSX430 suitable for easy and unobtrusive implementation in highly reverberant and architecturally sensitive environments. The low frequency response of the system can be easily extended using a JBL sub woofer system.

 

特点

  • Superb Speech Intelligibility
  • Slim Unobtrusive Design
  • Extended Frequency Response - up to 18kHz
  • Higher Fidelity
  • Wide Horizontal Dispersion
  • Vertical Beam Shaping (DDS Technology)
  • 32-bit floating point DSP
  • Control of Vertical Beam Shaping
  • Dual Line Inputs
  • Volume Control
  • Delay (up to 20 seconds)
  • 8 band parametric EQ
  • 8 user definable, password protected presets on board (recallable through third party control devices)
  • AVC (Automatic Volume Control) via build-in ambient mic.
  • Upgradeable firmware
  • Network Ready
  • Integral Surveillance
  • Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3

Applications

  • Transport Hubs
  • Large Places of Worship
  • Lecture Halls and Theatres
  • Large Conference Facilities
  • Atriums
  • Museums

Options

  • External Ambient Noise and Temperature Sensor
  • Input section with 1 x 0dBV and 1 x 100V
  • Input section with 2 x 100V
  • Full range of mounting accessories
  • Color matching service

下载

  Version Language Size Uploaded
Data Sheets
Intellivox DSX430 Datasheet
updated: 6月15日
    763.5 KB 6月15日
Manuals
Intellivox 115 - 500 Installation Manual
updated: 10月31日
    5.5 MB 10月31日
Brochures
Intellivox Brochure
updated: 10月03日
    23.0 MB 10月03日
CAD Drawings
Standard Series Drawings DWG
updated: 10月18日
    4.0 MB 10月18日
Standard Series Drawings PDF
updated: 10月18日
    2.4 MB 10月18日
Bim Objects
Intellivox BIM Files
updated: 10月18日
    4.2 MB 10月18日
Software
DDA (Digital Directivity Analysis)
version 5.1 (License free), updated: 4月20日
5.1 (License free)     207.5 MB 4月20日
WinControl with RAPID DDS™
version 2p96, updated: 2月10日
2p96     56.3 MB 2月10日
SketchUp plug-in
version 2019, updated: 2月10日
2019     745.6 KB 2月10日
Install Guides
Install Manual DC/DS/DSH/DSX 115 - 500
updated: 4月29日
    5.5 MB 4月29日
Ease Data
Intellivox EASE GLL
updated: 10月31日
    5.4 MB 10月31日
Intellivox EASE DLL
updated: 10月18日
    3.8 MB 10月18日

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

性能

Maximum SPL (1m) Continuous : 91 dBSPL (A-weighed at 30 m)
Peak : 94 dBSPL (A-weighed at 30 m)
Drivers 13 x 4” full range
8 x 1” horn loaded dome tweeter
Enclosure stainless steel (AISI 304) with epoxy coating
颜色 Enclosure and grill : RAL 9010 (white)
Speaker baffle : RAL 9011 (black)
Optional Accessories Multiple optional accessories available. Please see spec sheet or your local dealer for more info.

Accessories

JBL Intellivox Software | Understanding Intellivox Aiming Technologies and Software Types
JBL Intellivox Software Main photo
较大的图像
Aiming Technology
Speakers
Software
DDC™
Digital Directivity Control™ provides beam-STEERING, based on aiming parameters.
DC models
WinControl – Allows you to set the DDC beam-STEERING settings. This same software communicates with and uploads the settings to the speaker(s)

DDS™
Complex Digital Directivity Synthesis™ provides complex room coverage via beam-SHAPING. The shaping algorithm is based on a model of the room or listening space, resulting in consistent SPL and consistent frequency response from place to place within the listening space.
DS & DSX models
FOR LESS COMPLEX LISTENING SPACES:
WinControl™ – RAPID DDS™ (which is built into WinControl) selects the right DDS™ settings based on basic room and usage parameters. This same software then uploads the setting file to the speaker(s) by pressing “Apply”.

FOR MORE COMPLEX LISTENING SPACES:
DDA™ (Digital Directivity Analysis™) for modeling a listening space and computing DDS beam-SHAPING algorithms. Plus, WinControl™ for uploading the settings file to the speaker(s).
 
Software Systems
Speakers
WinControl™
  • Directly controls DDC™-driven products for: 1) aiming axis, 2) opening angle, and 3) focus distance. 
  • It is also used to set other audio parameters, including 8 parametric EQ bands, delay, AVC (automatic volume control) functions, volume level, surveillance related parameters, pilot tone detection, priority switching, 8 full presets, and more. 
  • Enables the upload of DDA™-calculated DDS™ directivity files to the speakers. 
  • RAPID DDS™ allows creation of DDS™ files to speakers without having to use DDA™.
DC, DS and DSX Models

DDA™
  • Integrates geometric modeling, direct sound prediction, statistical room acoustic prediction, graphic visualization, radiation pattern optimization and generation of output filter files.
  • The file is transferred to WinControl™ for uploading to the DSP-units of the speakers.
DDA supports all products (DC, DS and DSX) but you can only export beam SHAPING settings for DS and DSX.


 



 



 



 

 

支援/最常见问题

Intellivox DSX430

Active Beam Shaping Self Powered Column Loudspeaker Array