Intellivox HP-DS370
Ngừng sản xuất

Tạo hình chùm tích cực, loa cột tự chạy, mảng loa được xếp hạng IP55

Intellivox HP-DS370
Hình ảnh lớn hơn

Active Beam Shaping, Self Powered, Column Loudspeaker Array, IP55 Rated

The Intellivox HP-DS370 is a self-contained, especially high-power and high-output, 2-way, wide-bandwidth beam-shaping powered loudspeaker column loudspeaker with a high degree of outdoor capability. The HP-DS370 is a modern update to the classic Intellivox DS1608, which was the world’s first commercially available beam-shaping high power loudspeaker array. Since beam shaping’s introduction in 1999 the Intellivox High Power models have been specified to solve the problems of speech intelligibility and musical reinforcement in large highly reverberant spaces and theatres. The Intellivox HP-DS370 is capable of delivering up to 108 dB SPL at 30 meters (100 ft), as well as a frequency response to 18kHz. With an array length of 3.7 meters (12’ 2”) the Intellivox HP-DS370 not only offers long throw capability but also greater control at low frequencies. Intellivox HP-DS370 is capable of covering a substantial audience area while maintaining an even sound pressure level throughout. For full range applications JBL-Axys Beam Shaping Subwoofers can be used in conjunction with the HP-DS370 to provide enhancement and control at low frequencies, resulting in a full-range high-fidelity performance system. The fourteen, high efficiency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. Two coaxially mounted 1” compression drivers extend the HF response.

 

Tính năng

  • Superb Speech Intelligibility
  • IP-55 Outdoor Capable
  • Integrated Amplification and DSP
  • Slim Unobtrusive Design
  • Extended Frequency Response - up to 18kHz
  • Wide Horizontal Dispersion
  • Vertical Beam Shaping (DDS Technology)
  • 32-bit floating point DSP
  • Control of Vertical Beam Shaping
  • Dual Line Inputs
  • Volume Control
  • Delay (up to 20 seconds)
  • 8 band parametric EQ
  • 8 user definable, password protected presets on board (recallable through third party control devices)
  • AVC (Automatic Volume Control) via build-in ambient mic.
  • Upgradeable firmware
  • Network Ready
  • Integral Surveillance
  • Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3
 

Applications

  • Transport Hubs
  • Sports Arenas
  • Large Places of Worship
  • Lecture Halls and Theatres
  • Large Conference Facilities
  • Atriums
  • Museums
 

Options

  • Full range of mounting accessories
  • Color matching service

Tải xuống

Data Sheets
  Kích thước Đã tải lên
file type icon HP-DS370 Data Sheet
cập nhật: Thg 10 2020
600 KB Thg 10 2020
Brochures
  Kích thước Đã tải lên
file type icon Intellivox Brochure
cập nhật: Thg 10 2020
20 MB Thg 10 2020
CAD Drawings
  Kích thước Đã tải lên
file type icon Intellivox HP Series Drawings
cập nhật: Thg 10 2020
900 KB Thg 10 2020
file type icon HP Series Drawings PDF
cập nhật: Thg 10 2020
700 KB Thg 10 2020
BIM Objects
  Kích thước Đã tải lên
file type icon Intellivox BIM Files
cập nhật: Thg 10 2020
4 MB Thg 10 2020
Software
  Phiên bản Kích thước Đã tải lên
download icon for DDA (Digital Directivity Analysis) DDA (Digital Directivity Analysis)
phiên bản 5.1 (License free), phát hành: Thg 4 2020
5.1 (License free)   200 MB Thg 4 2020
download icon for SketchUp plug-in SketchUp plug-in
phiên bản 2019, phát hành: Thg 2 2020
2019   700 KB Thg 2 2020
Windows download icon WinControl with RAPID DDS™
phiên bản 2p96, phát hành: Thg 8 2023
2p96   60 MB Thg 8 2023
Ease Data
  Phiên bản Kích thước Đã tải lên
file type icon DDA Libraries for EASE DLL
phiên bản 1.0, cập nhật: Thg 10 2020
1.0  2 MB Thg 10 2020
file type icon Intellivox EASE DLL
cập nhật: Thg 2 2026
  4 MB Thg 2 2026
file type icon Intellivox EASE GLL
cập nhật: Thg 10 2019
  5 MB Thg 10 2019
Install Guides
  Kích thước Đã tải lên
file type icon HP Series Install Manual
cập nhật: Thg 10 2020
3 MB Thg 10 2020
Design Guides
  Ngôn ngữ Kích thước Đã tải lên
file type icon JBL Intellivox - Beyond Beam Steering
en cập nhật: Thg 12 2022
en  3 MB Thg 12 2022

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Phụ tùng & Dịch vụ

Thông số kỹ thuật

Maximum SPL (30m) Continuous : 97 dB SPL
Peak : 105 dB SPL
Typical Maximum Throw 25-50 m / 82-164 ft
Drivers 14 x 6.5” full range
2 x 1” Compression
Dimensions Height- 3738mm
Width- 198mm
Depth- 189mm
Weight- 82kg / 181lb
Enclosure stainless steel (AISI 304) with epoxy coating
Color Enclosure and grill : RAL 9010 (white)
Speaker baffle : RAL 9011 (black)
Optional Accessories Multiple optional accessories available. Please see spec sheet or your local dealer for more info.
Coverage Angle Vertical complex beam shaping (via software), wide horizontal dispersion (consult spec sheet for details)

Phụ kiện

JBL Intellivox Software | Hiểu Biết Về Công Nghệ Định Hướng Intellivox và Các Loại Phần Mềm
JBL Intellivox Software Main photo
Hình ảnh lớn hơn
JBL Intellivox Software detail thumbnail #1
Công nghệ Định hướng
Loa
Phần mềm
DDC™
Digital Directivity Control™ cung cấp điều khiển chùm loa, dựa trên các thông số định hướng.
Các mẫu DC
WinControl – Cho phép bạn đặt cài đặt điều khiển chùm loa DDC. Phần mềm này cũng giao tiếp và tải cài đặt lên loa

DDS™
Complex Digital Directivity Synthesis™ cung cấp phủ sóng phòng phức tạp thông qua định hình chùm loa. Thuật toán định hình dựa trên mô hình phòng hoặc không gian nghe, mang lại mức SPL và đáp ứng tần số nhất quán từ nơi này đến nơi khác trong không gian nghe.
Các mẫu DS & DSX
CHO CÁC KHÔNG GIAN NGHE ĐƠN GIẢN HƠN:
WinControl™ – RAPID DDS™ (được tích hợp sẵn trong WinControl) chọn cài đặt DDS™ phù hợp dựa trên các thông số phòng và sử dụng cơ bản. Phần mềm này sau đó tải tệp cài đặt lên loa bằng cách nhấn "Áp dụng".

CHO CÁC KHÔNG GIAN NGHE PHỨC TẠP HƠN:
DDA™ (Digital Directivity Analysis™) dùng để mô hình hóa không gian nghe và tính toán các thuật toán định hình chùm DDS. Cộng với WinControl™ để tải tệp cài đặt lên loa.
 
Hệ thống Phần mềm
Loa
WinControl™
  • Điều khiển trực tiếp các sản phẩm chạy DDC™ cho: 1) trục định hướng, 2) góc mở, và 3) khoảng cách tiêu điểm. 
  • Nó cũng được sử dụng để đặt các thông số âm thanh khác, bao gồm 8 dải EQ tham số, độ trễ, các chức năng AVC (điều khiển âm lượng tự động), mức âm lượng, các thông số liên quan đến giám sát, phát hiện tần số pilot, chuyển mức ưu tiên, 8 bộ cài sẵn đầy đủ, và nhiều hơn nữa. 
  • Cho phép tải các tệp định hướng DDS™ được tính toán bởi DDA™ lên loa. 
  • RAPID DDS™ cho phép tạo tệp DDS™ cho loa mà không cần phải sử dụng DDA™.
Các mẫu DC, DS và DSX

DDA™
  • Tích hợp mô hình hóa hình học, dự đoán âm trực tiếp, dự đoán âm học phòng thống kê, trực quan hóa đồ họa, tối ưu hóa mô hình bức xạ và tạo tệp bộ lọc đầu ra.
  • Tệp được chuyển đến WinControl™ để tải lên các đơn vị DSP của loa.
DDA hỗ trợ tất cả các sản phẩm (DC, DS và DSX) nhưng bạn chỉ có thể xuất cài đặt định hình chùm cho DS và DSX.


 



 


Hỗ trợ/FAQ