| Frequency Range (-10dB) |
37 Hz – 20 kHz |
| Frequency Response (±3 dB) |
43 Hz – 18 kHz |
| Coverage Pattern |
/64: 60° x 40°/66: 60° x 60°/95: 90° x 50°/00: 100° x 100°/26: 120° x 60° |
| Crossover Modes |
Bi-amp/Passive switchable |
| Passive Crossover Frequency |
1.5 kHz |
| Transducer Power Rating (AES) |
LF: 400 W (1600 W peak), 2 hrs300 W (1200 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs |
| System Power Rating |
Passive mode: 300 W (1200 W peak), 100 hrs |
| Maximum SPL (1m) |
Bi-amp mode: LF: 122 dB HF: 131 dB |
| System Sensitivity (1w @ 1m) |
Passive mode: 96 dB SPL |
| LF Driver |
1 x JBL 262H-1 300 mm (12 in ) driver with 50.8 mm (2 in) dual voice coil |
| Nominal Impedance |
8 ohms |
| Sensitivity (1W @ 1m, within operational band) |
97 dB SPL |
| HF Driver |
JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil |
| Sensitivity |
113 dB SPL |
| Waveguide |
PT-H126HF-1 |
| Enclosure |
Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment |
15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Finish |
Black DuraFlex™ finish. White available upon request. |
| Grille |
Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
| Input Connector |
NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
| Environmental |
Mil-Std 810; IP-x3 per IEC529 |
| Dimensions (H x W x D in vertical orientation) |
713 x 371 x 458 mm(28.06 x 14.6 x 18.1 in) |
| Net Weight (each) |
20.2 kg (45 lb) |
| Optional Accessories |
M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 |
| System Power Rating |
Passive mode: 300 W (1200 W peak), 100 hrs (IEC rated) |
| Nominal LF Driver Impedance |
8 ohms |
| Nominal HF Driver Impedance |
8 ohms |
更新: 2024年7月
コンサルタント サポート