JBL Professional VTX V25-II

Gambar Lebih Besar

Full Size 3-Way High-Directivity Line Array With Fixed Angle ASM Suspension

The VTX V25-II is a full size 3-way high-directivity line array element that includes a new 4th generation waveguide which improves long throw performance, wavefront control, and is an improved power match for the Crown IT4x3500HD. The transducer compliment for VTX V25-II is two 2000W 15" Differential Drive® woofers mounted in die cast aluminum baffles, four 8" Differential Drive midrange transducers firing through a patented (RBI Radiation Boundary Integrator®), and three revolutionary D2 Dual-Diaphragm Dual-Voice-Coil Compression Drivers loaded onto the newly designed waveguide. Patented rigging, Crown I-Tech HD amplification with BSS ® OmniDriveHD V5 Processing, and JBL HiQnet Performance Manager™ configuration and control software complete the system package.

Fitur

New 4th Generation HF Waveguide technology
Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
JBL’s patented RBI (Radiation Boundary Integrator®)
Cardioid-Arrayable Subwoofer Enclosure Models
Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
Patented JBL S.A.F.E.™ Suspension System
V5 Processing with Crown I-Tech HD or VRACK
JBL HiQnet Performance Manager™ System Configuration and Control
Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

Keterangan Lebih Lanjut

D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.

LEARN MORE

VTX V25-II WAVEGUIDE

Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.

LEARN MORE

DIFFERENTIAL DRIVE® TECHNOLOGY

Enhanced Performance and Dramatically Reduced Driver Weight

JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

LEARN MORE

VTX S.A.F.E™ Suspension & Laser setup

Next Generation Line Array System Solutions.

JBL’s patented S.A.F.E suspension system is streamlined for speed and efficiency with improved hardware for faster setup with fewer pinning operations and greater security.

LEARN MORE

System Integration

System Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

LEARN MORE

Unduhan

Specifications

	Ukuran	Diunggah
VTX V25-II Spec Sheet diperbarui: Jun 2023	1,26 MB	Jun 2023

Brochures

	Ukuran	Diunggah
VTX V25 System Brochure diperbarui: Des 2020	6,48 MB	Des 2020

CAD Drawings

	Ukuran	Diunggah
V25-II 2D Drawings PDF diperbarui: Jul 2019	125 KB	Jul 2019
V25 3D Drawings DXF diperbarui: Jul 2019	208 KB	Jul 2019

Compliances

	Ukuran	Diunggah
VTX V-Series Declaration of Conformity diperbarui: Des 2020	158 KB	Des 2020

Software

	Ukuran	Diunggah
Venue Synthesis dirilis: Jul 2026		Jul 2026
Performance Manager 3 dirilis: Jul 2024		Jul 2024

Ease Data

	Versi	Ukuran	Diunggah
VTX V25-II/S28 EASE GLL versi 1.2, diperbarui: Des 2020	1.2	29,8 MB	Des 2020

Preset Libraries

	Versi	Ukuran	Diunggah
V25-II Preset Library versi 2.1, diperbarui: Des 2020	2.1	595 KB	Des 2020

Service Notes

	Versi	Bahasa	Ukuran	Diunggah
VTX V25-II Spare Parts versi A, diperbarui: Apr 2026	A		72 KB	Apr 2026

Jika ada tautan di atas yang menampilkan karakter aneh di browser Anda, klik kanan file tersebut untuk menyimpannya ke komputer Anda.

Suku Cadang & Servis

Spesifikasi

System Type	Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Frequency Range (-10dB)	35Hz - 18 kHz (Preset: VTX V25-II)
Horizontal Coverage (-6 dB)	90 degrees nominal (200 Hz - 16 kHz)
Maximum Peak Output	LF: 141 dB MF: 140.5 dB HF: 149.5 dB
System Amplification	Crown Audio I-Tech HD
Nominal Impedance	LF: 2x 8 ohms MF: 8 ohms HF: 8 ohms
LF Driver	(2) JBL 2267H 15-inch woofer
MF Driver	(4) JBL 2168H 8-inch mid-frequency driver
HF Driver	(3) JBL 2430K D2 Dual Diaphragm Dual Voice Coil Compression Driver
Enclosure	Cast aluminum front baffle, Finnish birch plywood, black DuraFlex™ finish; four integral recessed handles
Inter-enclosure Angle	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Dimensions (H x W x D)	414 mm x 1223 mm x 614 mm 16.3 in x 48.2 in x 24.2 in
Net Weight (each)	82.6 kg (182 lb)

Aksesori

VTX V25 AF | Array Frame

Gambar Lebih Besar

Array Frame untuk suspensi atau ground stacking enclosure seri VTX V25. VTX-V25-AF juga kompatibel dengan enclosure subwoofer dual 18" VTX S28. Dilengkapi dengan kaki leveling yang dapat disesuaikan tingginya untuk aplikasi ground stack. Extension bar opsional VTX-V25-AF-EB tersedia.

Fitur:

Kompatibel dengan VTX V25, VTX V25-CS, VTX V25-II, VTX V25-II-CS dan VTX S28
9 titik angkat tersedia untuk suspensi satu titik
Extension Bar opsional tersedia
Opsi titik angkat depan-ke-belakang atau berdampingan yang fleksibel
Mendukung hingga 24 kabinet (tergantung geometri array)
Dapat digunakan untuk aplikasi ground stack
Ukuran shackle titik angkat: 5/8" atau 3/4"

Termasuk:

1 x VTX-V25-AF
4 x kaki leveling yang dapat disesuaikan tingginya untuk aplikasi ground stack
4 x Quick Release Pins (QRP) untuk mengamankan enclosure atas ke frame

Dokumentasi

VTX V25 AF EB | Array Frame

Gambar Lebih Besar

Aksesori Extension Bar yang digunakan bersama dengan rangka array VTX-V25-AF untuk menerapkan sistem seri VTX V25 dalam mode kompresi atau tegangan. Lima opsi pemasangan extension bar menyediakan pemisahan titik pengangkatan variabel (suspensi 2-titik) dan fleksibilitas tambahan untuk suspensi titik tunggal. Extension bar dapat dipasang depan atau belakang untuk meningkatkan up-tilt atau down-tilt array secara berturut-turut. Saat dipasang belakang, menyediakan titik pemasangan untuk suspensi kompresi. Satu extension bar dapat dipasang di tabung pusat rangka array, atau alternatifnya, sepasang extension bar dapat dipasang depan atau belakang di tabung rangka array kiri/kanan. Extension bar tunggal atau ganda juga dapat dipasang depan atau belakang dalam aplikasi ground stack untuk stabilitas tambahan dan berbagai pilihan sudut tilt array yang lebih luas. Extension bar ganda juga dapat dipasang depan-dan-belakang untuk suspensi kompresi ketika up-tilt array yang meningkat diperlukan.

Fitur:

Kompatibel dengan VTX-V25-AF
2 x titik pengangkatan tersedia untuk suspensi titik tunggal
1 x titik pengangkatan tersedia untuk pemasangan level hoist VTX-V25-LH
Mendukung hingga 24 cabinet (tergantung geometri array)
Ukuran shackle titik pengangkatan: 5/8" atau 3/4"

Disertakan:

1 x extension bar VTX-V25-AF-EB
1 x leveling foot dapat disesuaikan tingginya untuk aplikasi ground stack
2 x Quick Release Pins (QRP) untuk mengamankan extension bar ke rangka array

Dokumentasi

VTX V25 PB | Pull Back Accessory

Gambar Lebih Besar

Pull Back accessory for attachment to the bottom V25 enclosure to facilitate compression suspension of VTX V25-II-CS or VTX V25-CS arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V25-LH lever hoist or chain motor attached to the VTX-V25-AF-EB extension bar (Extension Bar Pullback). The VTX-V25-PB is also compatible with non Compression Suspension V25 enclosures and can be used for rear motor pullback configurations.

Features:

Compatible with VTX V25-II, VTX V25-II-CS, VTX V25, VTX V25-CS
Can be used with VTX-V25-LH lever hoist or separate pull back suspension point
Supports up to 2000 lbs of pull back force
Shackle size: 5/8” (included)

Included:

1 x central pullback bar with 2x left/right adapter brackets for connection to bottom V25 cabinet
2 x 5/8” shackles for attaching spreader bar to chain bridle
1 x 24” dual leg chain bridle with locking safety hooks and upper master link for attachment to compression or pullback device

Dokumentasi

VTX V25 PB Specsheet [539 KB]

VTX V20 DF | DOWN FILL ADAPTER

Gambar Lebih Besar

Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays. Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20 (3.5deg, 7.5deg, 11deg). Able to be used as a down-fill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill. Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS.

Features:

Angle options: 3.5deg, 7.5deg, 11deg
Lightweight design
Precise HF exit alignment between V25-II and V20
Support for up to 6x VTX V20 cabinets

Dokumentasi

VTX V20 DF Spec Sheet [568 KB]
VTX V20 DF Suspension Manual (rev2) [852 KB]
VTX V20 DF Customer Drawings [1,42 MB]

VTX V25 ACC | Accessory Cover and Casterboard

Gambar Lebih Besar

Kit Aksesori VTX Series V25 untuk transportasi dan perlindungan satu enclosure VTX V25 atau VTX V25-II. Mencakup: penutup pelindung berlapis, diperkuat dengan potongan pegangan dan akses panel belakang; board dolly dengan caster berkualitas tour grade dan mekanisme cam berputar untuk perlekatan aman ke enclosure V25. Celah miring auto-locate dengan tab mount board caster V25. Mekanisme cam berputar dapat dilepas saat cabinet V25 atau V25-II menghadap ke bawah selama proses suspensi (tidak perlu melepas board caster secara manual).

Fitur:

Kompatibel dengan VTX V25 dan VTX V25-II
Mencakup penutup pelindung berlapis dan board caster
Potongan pegangan dan akses panel belakang
Cabinet speaker dapat diuji tanpa sepenuhnya melepas penutup
Caster berkualitas tour grade
Dapat ditumpuk untuk penyimpanan yang nyaman
Mekanisme cam pelepas/kunci berputar untuk perlekatan aman ke enclosure loudspeaker

Disertakan:

1 x board caster VTX V25
1 x penutup pelindung berlapis

Dokumentasi

VTX V25 ACC Specsheet [789 KB]

VTX V25 CS K | KIT SUSPENSI KOMPRESI

Gambar Lebih Besar

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes:

2x Suspension frame labels
2x Slot hinge bars
2x ASM bars
2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

Dokumentasi

VTX V25 CS K Specsheet [526 KB]
VTX V25 CS K Components [891 KB]

VTX V25 CS K LJ | LABEL KIT

Gambar Lebih Besar

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes:

2 spare labels
Label jig installation fixture
Detailed instructions (see documentation download)
NOTE: At least one label jig installation fixture should be ordered
per VTX-V25-CS-K order

Dokumentasi

VTX V25 CS K LJ Shetsheet [401 KB]
VTX V25 CS K LJ Installation Guide [8,73 MB]

HARMAN Pro Insights

Backstage Pass to 8 Pro Audio & Lighting Shows Rocking Live Entertainment

After a challenging couple of years, live music is back in full force. Tours, residencies and festivals are returning and filling venues to capacity. Iconic HARMAN Professional brands like JBL, Martin, Crown, AKG, BSS and Soundcraft are providing touring artists and suppliers as well as live venues

CONTINUE READING

Dukungan/FAQ

HARMAN Professional Solutions:

find_dealer

have_question

Dukungan Konsultan