JBL Professional XLC 2500

Imágenes más grandes

Disponibles en dos modelos, el XLC2500 y XLC2800 incorporan la tecnología patentada DriveCore™ de Crown, que reduce significativamente el tamaño de los amplificadores, mientras proporciona una operación mucho más eficiente en energía, sin comprometer el rendimiento. Compactos, potentes y rentables, la serie XLC ofrece facilidad de instalación, calidad de sonido excepcional y la confiabilidad inquebrantable inherente a cada producto Crown. Estos amplificadores son opciones potentes y asequibles para los mercados de cine e instalación.

Power Matrix

Características

Some important features for cinema applications:

Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms
XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions
XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function
Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs
Support parallel connection of cinema surround speaker
Indicators provide accurate diagnostics: Power, Signal, Clip and Fault
Volume control on rear panel of amplifiers
High performance, light weight
DriveCore based amplifier – weighs less than 14lbs (6 kgs)

Some important features for install applications:

Minimal front panel control; block connectors and controls on back of amplifiers
High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability
Configurable input operation for stereo and parallel and bridge modes
Configurable output operation for stereo and bridge modes

Descargas

Documentos

	Tamaño	Subido
XLC 2500 Hoja de datos actualizado: abr 2026	5,71 MB	abr 2026
XLC 2500 Manual del propietario actualizado: abr 2026	5,38 MB	abr 2026

Si alguno de los enlaces anteriores muestra caracteres extraños en su navegador, haga clic con el botón derecho en el archivo para guardarlo en su computadora.

Especificaciones

AC Line Voltage and Frequency Configurations Available	(+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz
Voltage Gain	35
Sensitivity	1.4V (for full rated power at 4 ohms)
Signal to Noise Ratio	(ref. rated power, 8 ohms, 1 kHz) > 103 dB
THD	<0.5%
Damping Factor	(8 ohms, 10 Hz to 400 Hz) >200
Intermodulation Distortion	(from full rated output to -30 dB) <0.3%
Frequency Response (at 1W, 20 Hz - 20 kHz)	0 dB
Crosstalk	>85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz)
Input Impedance (nominal)	20 kilohms balanced, 10 kilohms unbalanced
Load Impedance	2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
Dimensions	19" x 3.5" x 8" (48.3cm x 8.9cm x 20.6cm)
PESO	8.3 lbs (3.75 kg)
Shipping Weight	10.7 lbs (4.85 kg)
IEC Power Connector	15A