Last Updated: Mar 12
Version: v1.3.13 Release Date: 01/02/2018 ---------------------------------------------------------- 1. Prerequisites ---------------------------------------------------------- - None ---------------------------------------------------------- 2. Revision History ---------------------------------------------------------- Version 01/02/2018 (v1.3.13) • No longer show Unsupported Mode screen on encoder when forced into local play mode • Migration tool now migrates KVM and N-Act events • Encoder pass thru port HDMI audio can now be turned on/off • Various bug fixes Version 12/7/2017 (v1.3.11) • Add support for detecting and handling color space range (limited/full range). Version 12/7/2017 (v1.3.10) • Correct issue where the the HDMI output sometimes fails to initialize Version 11/9/2017 (v1.3.9) • AES67 correctly restored after low power mode • Various bug fixes Version 10/12/2017 (v1.3.8) • Updated help file • Various bug fixes Version 10/11/2017 (v1.3.7) • Added getStatus variable IMC to report 1 when interleaved multicast is enabled • Encoder EDID broken now has 4 EDIDs -- 2x for 4K60 YUV444, and 2x for 4K60 YUV420 only. • The KVM Directory Screen option has been removed from the web page • Encoder color conversion no longer affects YUV420 inputs • Migration back end tools added • Various bug fixes NOTE: 4K60 420 Video modes require the encoder to be programmed with EDID or will not be supported! Version 10/5/2017 (v1.3.6) • Added getStatus variable IMC to report 1 when interleaved multicast is enabled • Various bug fixes Version 10/2/2017 (v1.3.5) • Improved decoder EDID handling with different monitors • Network video and audio stream indicator added to web page • Audio activity reported on web page (no audio samples = no activity) • ESD recovery code added to audio • VGA/HDMI detection status added to web page and status packet • Various bug fixes Version 08/25/2017 (v1.3.4) • AES67 defaults to use the default port for RTP media (5004). • Added support for 3840x2160 4:2:0 • Various bug fixes Version 08/25/2017 (v1.3.3) • Ultra Low Latency mode option added to decoder and related optimizations • 3840x2160 & 4096x2160 4:2:0 support added (50 and 59.94/60 Hz) • Improved monitor timing support • 7.1 Audio added to non-AES67 configurations • AES67 addresses now require first octet to be 239 • Various bug fixes Version 08/14/2017 (v1.2.9) • Improved monitor timing accuracy • Various bug fixes Version 08/09/2017 (v1.2.8) • Color space improvements to encoder pass thru port • Fixed flush command of ports • Improved plug/unplug handling for blu-ray units with HDCP • Detect and fix color shift start up case on Xbox units • Startup initialization of 4K60 for decoder and pass-thru (avoid black screen) • Improved monitor initialization that would cause a black screen or no signal • Various bug fixes Version 08/02/2017 (v1.2.5) • Color space improvements to encoder pass thru port • Fixed flush command of ports • Fixed previously not working commands (Force HTTPS, etc.) • Various bug fixes Version 07/07/2017 (v1.2.4) • Color space compatibility improvements Version 07/07/2017 (v1.2.2) • Audio no longer pops when changing between diffferently encrypted streams or password changes • Gratuitous arp and unsolicated status are correctly sent after large time adjustment • Removed no longer needed web page features (Swap CbCr, horizontal offset, vertical offset, local play audio, simple DVI detect) • Adjust 1280x1024 VGA inputs to line up video better • Port speed is now shown on the web page • Local play caches more images • USB/KVM now defaults to off • Improved unsupported mode detection and presenting the screen • Various bug fixes Known bug: Force HTTPS, Encryption Password, Encoder encrytion, Reset KVM Config, and Settings Lock can currently only be confirmed through N-Able/N-Command Version 07/07/2017 (v1.1.3) • Improved AES67 accuracy on encoders • HDMI on decoders can now be muted • Pass thru HDMI can now be enabled/disabled • HDMI now supports off on stream loss • Scaler modes 2160p50 and 2160p59.94 added • Improved encoder HDMI input unplug/plug detection for better performance • Touchscreen monitors now supported • Audio downmixing auto feature added • IR commands no longer repeat when sent from web page. • Fixed problem where audio would not play when set to not follow video stream • Improved Updater Known bug: Input audio when selecting local play page is not working on decoder (currently mutes) Known bug: Updater is sometimes not taking updates and requires power cycle and retry. This update fixes the problem for future updates. Version 06/23/2017 (v1.0.11) • Fast Cable Detect event added to make cable plug in's faster • Improved Monitor compatibility (black screen issues on decoders) • web page enable/disable feature added (secure ports only) (WEB:x status added to getStatus packet) • SSL Certificates now have regenerate certificate option on security page • AES67 timing improved on encoder and decoder. • Decoders no longer require output connection to accept and play AES67 audio. • Encoder now supports 1080i input • Decoder mute/unmute now works properly • Encoder no longer accepts resolutions of 800x600 or lower. • EDID changed to no longer have unsupported deep color settings • Web page improvements (turn off unused pass thru invert syncs, AES67 port correction, etc.) • Added volume up/down control command • Removed 1024x768p60 output scaler mode • Auto sync improvements (turned off when doing local play) • Misc. bug fixes increasing stability and performance Known bug: Updater is sometimes not taking updates and requires power cycle and retry. Version 06/02/2017 (v0.8.14) • Improved AES67 Audio Version 05/23/2017 (v0.8.11) • Improved AES67 Audio Version 05/05/2018 (v0.8.8) • Initial Release ---------------------------------------------------------- 3. Known Issues ----------------------------------------------------------