With 6 inputs and 4 outputs the dbx ZonePRO® 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.
Beyond processing, the ZonePRO® products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.
The ZonePRO® 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.
Features
- Advanced Feedback Suppression (AFS™)
- Autowarmth®
- Auto Gain Control
- Compression
- Limiting
- Noise Gating
- Notch Filtering
- Bandpass and Crossover Filters
- Parametric EQ
- Security Lockout
- Wall Panel Control
- RS-232 Control
- Windows® 2000 and XP GUI
- IEC, UL and CSA Approvals
Downloads
Size | ||||
![]() |
2,11 MB | |||
![]() |
733 KB | |||
![]() |
234 KB | |||
![]() |
295 KB | |||
![]() |
1,42 MB | |||
![]() |
487 KB | |||
![]() |
1,91 MB | |||
![]() |
1,71 MB | |||
Software | ||||
version 2.1,
updated: Aug 2016
|
563 KB | |||
version 3.0,
updated: Aug 2016
|
4,99 MB | |||
version 1.3,
updated: Aug 2016
|
184 KB | |||
version 3.2,
updated: Mai 2022
|
15,1 MB | |||
Tech Notes | ||||
updated: Okt 2020
|
274 KB | |||
Install Guides | ||||
updated: Okt 2020
|
11 MB | |||
3rd Party Resources | ||||
updated: Okt 2020
|
246 KB | |||
Safety Sheets | ||||
updated: Aug 2017
|
328 KB | |||
Quick Start Guides | ||||
updated: Aug 2017
|
860 KB |
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.
Specifications
Input | (6 total) (2) Switchable line or mic inputs (4) RCA Source |
Input Connectors | Euroblock (Line and Mic) RCA (Source) |
Input Type | Electronically balanced/RF-filtered |
Input Impedance | 50k ohm balanced, >75k ohm unbalanced |
Max Input | +20dBu Mic/Line, +12dBu RCA |
CMRR | >40dB, typically >55dB @ 1 kHz |
Mic Preamp gain | 30 to 60dB |
Mic Preamp Equivalent Input Noise (EIN) | <-118dB |
Mic Preamp Phantom Power | 15V |
Output | 4 total |
Output Connectors | Euroblock |
Output Type | Electronically Balanced, RF Filtered |
Output Impedance | 120 ohms balanced, 60ohm unbalanced |
Max Output | +20dBu |
A/D Converter | dbx Type IV™ conversion system |
A/D Dynamic Range | (line) >113 dB, A-weighted, >110 dB unweighted |
Type IV Dynamic Range | >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW |
Digital Output | RCA 24-Bit oversampling |
Digital Output Dynamic Range | >114 dB A-weighted, 110dB unweighted |
Sample Rate | 48kHz |
D/A Dynamic Range | 112 dB A-weighted, 109dB unweighted |
Dynamic Range | >109 dB A-weighted, >106 dB unweighted |
THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
Frequency Response | 20Hz - 20kHz, +/-0.5dB |
Interchannel Crosstalk | >80dB typical |
Propagation Delay | 0.6 msec |
Operating Voltage | 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz |
Power Consumption | 29 W |
Unit Weight | 6.8 lbs.(3.1 kg) |
Shipping Weight | 8.8 lbs. (4.0 kg) |
Dimensions | 1.75” H x 5.75” D x 19” W |
Safety Agency Certifications | UL 600065, IEC 60065, EN 55013, E60065 |
Training Modules
- ZonePRO Basic Programming Overview
- ZonePRO Training Modules Overview
- ZonePRO Overview
- ZonePRO Connecting via RS232
- ZonePRO Programming an Offline Device
- ZonePRO Software-Firmware Compatibility
- ZonePRO Networking Properties & Wizard
- ZonePRO Help Menu
- ZonePRO Configuring The Serial Connection
- ZonePRO Configuring The Ethernet Connection
- ZonePRO Audio Inputs & Outputs
- ZonePRO Link Inputs & Outputs
- ZonePRO Zone Controller Inputs
- ZonePRO Program Screen
- ZonePRO Configuration Wizard - Source Configuration
- ZonePRO Configuration Wizard - Zone Configuration
- ZonePRO Configuration Wizard - ZC Panel Configuration
- ZonePRO Configuration Wizard - Source ZC Association
- ZonePRO Configuration Wizard - Routing and Zone ZC Association
- ZonePRO Configuration Wizard - Front Panel Configuration
- ZonePRO Paging and Priority Overrides Explained
- ZonePRO DSP - Input Processing
- ZonePRO DSP - Parametric EQ
- ZonePRO DSP - Automatic Gain Control
- ZonePRO DSP - Notch Filter
- ZonePRO DSP - Compressor
- ZonePRO DSP - Noise Gate
- ZonePRO DSP - De-esser
- ZonePRO DSP - Advanced Feedback Supression
- ZonePRO DSP - Mid Router
- ZonePRO DSP - Mid Mixer
- ZonePRO DSP - Auto Warmth
- ZonePRO DSP - Band Pass Filter
- ZonePRO DSP - Limiter
- ZonePRO DSP - Ambient Noise Compensation
- ZonePRO DSP - Delay
- ZonePRO DSP - Output Polarity
- ZonePRO DSP - Storing/Recalling Scenes
- ZonePRO Programming - Scene Wizard
- ZonePRO Programming - Schedule Wizard
- ZonePRO Programming - Saving/Opening Files
News
Support/FAQs
640 FAQs
How Can I Perform a Hard Reset On the 640 ZonePRO?
The following procedure will reset all settings on the ZonePRO 640
While powering on the unit press and hold the <2> button (next to the display) until the following message appears:
!: HARD RESET?
Press the <UTIL> button (large knob) in to reset the unit.
Pressing the <PAGE 1> button will abort the System Reset sequence and the unit will reset normally.
How to connect to a dbx ZonePRO Processor using ZonePRO Designer Software
ZonePRO You Tube Video Link:
Connecting to a dbx ZonePRO Processor using ZonePRO Designer Software
How to setup a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
ZonePRO You Tube Video Link:
Setting up a dbx ZonePRO™ Product using the Configuration Wizard in ZonePro Designer
How do you set up page steering in ZonePRO Designer using dbx ZC-3 and ZC-7 controllers?
ZonePRO YouTube Video Link: