Das ZonePRO 1260m bietet feste Ein-/Ausgänge, eine vorkonfigurierte Architektur, konfigurierbare Insert-Verarbeitung und optionale Vervielfältigung von Audiokanälen auf ein anderes ZonePRO-Gerät über einen Link Bus.
Das 1260m verfügt über insgesamt 12 Eingänge und sechs Ausgänge. Die Eingänge umfassen sechs symmetrische, zwischen Mikrofon und Line umschaltbare Eingänge mit Klemmleisten, vier mono-summierte Paare von unsymmetrischen RCA-Eingängen und einen S/PDIF-Eingang für bis zu zwei digitale Kanäle. Die hardwaregesteuerte Mikrofonverstärkung ermöglicht eine kanalspezifische Anpassung der Mikrofonverstärkung.
Das 1260m-Gerät hat eine vorkonfigurierte Architektur mit Eingangsverarbeitung, einer zentralen Matrix und Ausgangsverarbeitung. Zwei Eingangs-Insert-Positionen und eine Ausgangs-Insert-Position ermöglichen kanalspezifische Insert-Verarbeitung. AutoWarmth®, eine psychoakustische Funktion, die die gesamte Frequenzbandbreite auch bei gesunkenem Signalpegel beibehält, ist in jeder Ausgangszone permanent verfügbar.
Ein Link Bus ermöglicht die Vervielfältigung der ersten sechs Audiokanäle auf ein anderes ZonePRO-Gerät in Anwendungen, bei denen zusätzliche Ausgangszonen erforderlich sind.
Die Frontplatte des 1260m bietet umfassende Signalpegelanzeigen, ein informatives LCD-Display und benutzerdefinierbare Bedienelemente.
Zusätzliche Systemsteuerung wird durch optionale Zone Controller bereitgestellt. Diese Sammlung von Hardware-Wandreglern stellt eine Serie einfacher, eleganter Bedienoberflächen für Funktionen wie Lautstärke-, Quellen- und Voreinstellungssteuerung dar.
Alle ZonePRO-Geräte können von Steuerungssystemen von Drittanbietern über RS-232 oder Ethernet gesteuert werden (siehe Tabelle für weitere Informationen).
ZonePRO Designer – die Konfigurations-, Steuerungs- und Überwachungssoftware für die ZonePRO-Geräteserie – bietet die Steuerung des ZonePRO 1260m über Ethernet oder RS-232. Der Konfigurations-Assistent in ZonePRO Designer führt Benutzer durch den schrittweisen Konfigurationsprozess des 1260m.
Eigenschaften
- 12 Eingänge / 6 Ausgänge
- 6 symmetrische Mikrofon-/Line-Eingänge
- 4 unsymmetrische, mono-summierte RCA-Eingangspaare
- S/PDIF-Eingang
- Mikrofonverstärkung pro Kanal
- Vorkonfigurierte Architektur
- Zwei konfigurierbare Eingangs-Insert-Positionen
- Eine konfigurierbare Ausgangs-Insert-Position
- AutoWarmth® pro Ausgabezone
- Link-Bus
- Umfassende Signalpegelanzeige
- Front-Panel-LCD
- 9 benutzerdefinierbare Bedienelemente auf der Frontplatte
- Optionale ZC-Controller
- Ethernet-Steuerung
- Serielle Steuerung
- Steuerung durch Drittanbieter
- Assistentengestützte Konfiguration
Downloads
Dokumente
| Größe | |
|
|
2,11 MB |
|
|
733 KB |
|
|
469 KB |
|
|
1,39 MB |
|
|
487 KB |
Software
| Größe | |
|
|
563 KB |
|
|
4,99 MB |
|
|
184 KB |
|
|
387 MB |
Tech Notes
| Größe | |
|
|
274 KB |
Application Guides
| Größe | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Sheets
| Größe | |
|
|
328 KB |
3rd Party Resources
| Größe | |
|
|
246 KB |
Install Guides
| Größe | |
|
|
11 MB |
Training Resources
| Größe | |
|
|
367 MB |
Quick Start Guides
| Größe | |
|
|
860 KB |
Falls einer der obigen Links zu seltsamen Zeichen in Ihrem Browser führt, klicken Sie bitte mit der rechten Maustaste auf die Datei, um sie auf Ihrem Computer zu speichern.
Spezifikationen
| Input | 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input |
| Input Type | Euroblock (Mic/Line), RCA (Source) |
| Input Impedance | Euroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered |
| Max Input | +20dBu Mic/Line, +12dBu RCA |
| CMRR | > 40dB, typically >55db @ 1kHz |
| Mic Preamp gain | 30 to 60dB |
| Mic Preamp Equivalent Input Noise (EIN) | < -118dBu, 22Hz-22kHz, 150Ω Source Impedance |
| Mic Preamp Phantom Power | 15V |
| Output | 6 Total |
| Output Type | Electronically Balanced, RF Filtered Euroblock |
| Output Impedance | 120Ω Balanced, 60Ω Unbalanced |
| Max Output | +20dBu |
| I/O Meter | 6 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters |
| LCD Display | LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute |
| A/D Converter | dbx Type IV™ Conversion System |
| A/D Dynamic Range | (line) >113dB, A-weighted, >110dB unweighted |
| Type IV Dynamic Range | >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW |
| Sample Rate | 48kHz |
| D/A Dynamic Range | 112dB A-weighted, 109dB unweighted, 22kHz BW |
| Dynamic Range | >110dB A-weighted, >107dB unweighted, 22kHz BW |
| THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
| Frequency Response | 20Hz – 20kHz, +/- 0.5dB |
| Interchannel Crosstalk | >80dB typical |
| Propagation Delay | 0.8 msec |
| Operating Voltage | 100-240 VAC, 50/60Hz |
| Power Consumption | 27 W |
| BTU | <92.13 |
| Unit Weight | 6.2 lbs / 2.81 kg |
| Shipping Weight | 8.35 lbs / 3.78 kg |
| Dimensions | 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm) |
| Safety Agency Certifications | UL 60065, IEC 60065, E 60065, EN 55013 |
Schulungsmodule
- ZonePRO Basic Programming Overview
- ZonePRO Training Modules Overview
- ZonePRO Programming an Offline Device
- ZonePRO Overview
- ZonePRO Connecting via RS232
- ZonePRO Software-Firmware Compatibility
- ZonePRO Networking Properties & Wizard
- ZonePRO Help Menu
- ZonePRO Configuring The Serial Connection
- ZonePRO Configuring The Ethernet Connection
- ZonePRO Audio Inputs & Outputs
- ZonePRO Link Inputs & Outputs
- ZonePRO Zone Controller Inputs
- ZonePRO Program Screen
- ZonePRO Configuration Wizard - Source Configuration
- ZonePRO Configuration Wizard - Zone Configuration
- ZonePRO Configuration Wizard - ZC Panel Configuration
- ZonePRO Configuration Wizard - Source ZC Association
- ZonePRO Configuration Wizard - Routing and Zone ZC Association
- ZonePRO Configuration Wizard - Front Panel Configuration
- ZonePRO Paging and Priority Overrides Explained
- ZonePRO DSP - Input Processing
- ZonePRO DSP - Parametric EQ
- ZonePRO DSP - Automatic Gain Control
- ZonePRO DSP - Notch Filter
- ZonePRO DSP - Compressor
- ZonePRO DSP - Noise Gate
- ZonePRO DSP - De-esser
- ZonePRO DSP - Advanced Feedback Supression
- ZonePRO DSP - Mid Router
- ZonePRO DSP - Mid Mixer
- ZonePRO DSP - Auto Warmth
- ZonePRO DSP - Band Pass Filter
- ZonePRO DSP - Limiter
- ZonePRO DSP - Ambient Noise Compensation
- ZonePRO DSP - Delay
- ZonePRO DSP - Output Polarity
- ZonePRO DSP - Storing/Recalling Scenes
- ZonePRO Programming - Scene Wizard
- ZonePRO Programming - Schedule Wizard
- ZonePRO Programming - Saving/Opening Files
Nachrichten
Support/FAQs
1260m FAQs
So verbinden Sie sich mit einem dbx ZonePRO Processor mithilfe der ZonePRO Designer Software
ZonePRO YouTube-Videolink:
Verbindung zu einem dbx ZonePRO Processor mithilfe der ZonePRO Designer Software
Einrichtung eines dbx ZonePRO™-Produkts mit dem Konfigurationsassistenten in ZonePro Designer
ZonePRO YouTube-Videolink:
Einrichtung eines dbx ZonePRO™ Produkts mit dem Konfigurationsassistenten in ZonePro Designer
Wie richten Sie das Page Steering in ZonePRO Designer mit den dbx ZC-3 und ZC-7 Controllern ein?
ZonePRO YouTube Video Link:


Beratersupport
Ebenfalls erhältlich bei