JBL Professional VLA601i

Større billeder

Tre-vejs fuldfrequent højttaler med 2 x 15" LF, 2 x 8" MF, 3 x 1,5" exit HF 60° vandret spredning

Variable Line Array Series (VLA Series) er et revolutionerende produkt, der leverer højtidsvirkende lydforstærkning ved kastelængder langt ud over rækken af traditionelle højttalerekonstruktioner.

Funktioner

Line array-modul optimeret til permanente installationsapplikationer.
Standardversion med 3 HF-drivere, 2 MF-drivere og 2 LF-drivere
Avancerede teknologi-komponenter til lav vægt og høj udgangsstyrke.
Omfattende ophængningspunkter til konfiguration af line array.
Robust DuraFlex™-finish og vejrbestandige komponenter. JBL's WRC eller WRX vejrbeskyttelse
er også tilgængelig.

For at forbedre pålideligheden under vejrforhold og reducere vandindtrængning kan skabdimensionerne for WRC- og WRX-modeller være forskellige fra standardmodellets dimensioner. Kontakt CustomAudio@harman.com for tegninger og/eller dimensionsoplysninger for WRC- og WRX-modeller.

Downloads

Specifications

	Størrelse	Uploadet
VLA601i Spec Sheet opdateret: okt 2020	161 kB	okt 2020

Manuals

	Version	Sprog	Størrelse	Uploadet
Weather Resistant Configurations version A, opdateret: maj 2023	A		86,1 kB	maj 2023

Brochures

	Sprog	Størrelse	Uploadet
Loudspeakers for Sports Facilities opdateret: jul 2024		5,71 MB	jul 2024

Simulation Data

	Version	Størrelse	Uploadet
JBL Pro ALL CLF Files version 12-10-21, opdateret: maj 2023	12-10-21	24 MB	maj 2023

Whitepapers

	Størrelse	Uploadet
VLA White Paper opdateret: okt 2020	1,47 MB	okt 2020

Drawings 2D/3Ds

	Version	Størrelse	Uploadet
VLAi Dimensional Drawings version A, opdateret: okt 2020	A	485 kB	okt 2020

Speaker Tunings

	Størrelse	Uploadet
VLAi Series R3 DCI Series Tuning opdateret: feb 2021	231 kB	feb 2021

Hvis nogle af linksene ovenfor resulterer i mærkelige tegn i din browser, skal du højreklikke på filen for at gemme den på din computer.

Reservedele og service

Specifikationer

Frequency Range (-10dB)	41 - 20kHz
Frequency Response (-6 dB)	45 - 19.5kHz
Frequency Response (-3 dB)	50 - 19.2kHz
Horizontal Coverage	60° nominal (500 Hz – 16 kHz)
Vertical Coverage	Varies with array size and configuration.
System Power Ratings	LF: 1000W Continuous (IEC /100 hour) MF: 400W Continuous (IEC /100 hour) HF: 160W Continuous (IEC /100 hour)
Maximum SPL (1m)	147.2dB (Preset: Flat)
LF Driver	2 x JBL 2265H, 15in diameter, dual 3in diameter voice coil, Neodymium Differential Drive
Nominal Impedance	4 ohms
Sensitivity (2.83V @ 1m)	LF: 99dB/96dB MF: 107dB/104dB HF: 108db/111dB
Mid-Frequency Driver	2 x JBL 2169H, 8in diameter, dual 3in diameter voice coil, Neodymium Differential Drive
High-Frequency Driver	3 x JBL 2432H, 1.5in exit compression driver, 3in diameter voice coil, Neodymium Magnet
Enclosure	18mm and 16mm, Exterior grade Baltic birch plywood, DuraFlexTM finish or optional Fiberglass
Suspension Attachments	16 points (4 each top bottom & rear, 2 each side), M10 threaded hardware (eyebolts NOT included).
Finish	Black DuraFlexTM (STD), Gray DuraFlexTM (WRC), Gray Fiberglass (WRX), optional colors; Stainless Steel Hardware (WRC/WRX)
Optional Weather Resistant Versions	WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperatures. See WRC/WRX configuration sheet for details.
Grille	Powder coated 14 gauge perforated steel, zinc-phosphate dipped, acoustically transparent foam backing (grill cloth backing on white units) (16 gauge stainless steel on WR versions)
Input Connectors	Barrier Strip for #6 spade lug, including gland nut and cover plate
Environmental	Mil-Std 810; IPx3 per IEC529. For higher environmental ratings, use WRC or WRX.
Dimensions (H x W x D)	528.3mm x 1346.2mm x 767.1mm (20.8in x 53.0in x 30.2in)
Net Weight	100.7kg (222.0lbs)